Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

The Captn's Wench: PE Device

Oh, LOVE the new avatar Cap!


"In an honest Service there is thin Commons, low Wages, and hard labour; in this (Piracy), Plenty and Society, Pleasure and Ease, Liberty and Power; and who would not balance Creditor on this side when all the Hazard that is run for it, at worst, is only a sour Look or two at choaking. No, A merry Life and a short one, shall be my Motto."--Bartholomew Roberts

<( > (By the way, how did you know I used “that” ruler?)<

Ah, it’s a shame Boss. “That” ruler….. THE ruler. Your breaking my heart all over again Steve. You should’ve retired him. Set him out to pasture. Maybe given him the gold plated watch and kool-aid party. Not much, just a small acknowledgement of his service. All those measurements…remember the first time he told you that you had gained? You hugged him? Or what about the time you became frustrated and almost gave up. Who was there beckoning you back with his cute little black comb-over and his never-used metric edge? I’m gonna miss the little guy (sniff) didn’t even get to say goodbye. I…I’ll always have a place for him in my heart. I think we all will.

Quote
Originally posted by PirateSteve
Oh, LOVE the new avatar Cap!


Thanks Pirate.
(I’m editing this because)… I really have to thank DiamondWinds, who without prompting sent me a few “pirate” avatars. It was a really nice gesture and I’m incredibly appreciative of it. Thank you DW.
Pirate, your name came up and we both agreed that nobody has a cooler or scarier avatar in all of PE.

—Cap

Cap, don’t be too sad. Rulie was relegated to penile measuring only after the end broke off after many successful and faithful years of measuring boat parts. A fine carpenters rule he was indeed, none of those silly metrics or 32nds, or 8ths, just honest inches separated into 10ths. Alas, he suffered a terminal split after a horrible fall and has been on duct tape life support since. Not dignified at all. And whereas Rulie only got used every now and then since his terminal fall, in his reconstituted form he is being used every day. I am using bits of old Rulie even now in my Wench hooked to my Penimaster (I call it a Wenchimaster). He is once again a useful and valued tool. In fact, we are much more intimate now than we ever have been. Would that I had such luck in my next life.


"In an honest Service there is thin Commons, low Wages, and hard labour; in this (Piracy), Plenty and Society, Pleasure and Ease, Liberty and Power; and who would not balance Creditor on this side when all the Hazard that is run for it, at worst, is only a sour Look or two at choaking. No, A merry Life and a short one, shall be my Motto."--Bartholomew Roberts

Cap,
Well I have put together the “Wench” what a great device. One question perhaps you can help me with. It seems that when I use it that it is pulling more outer skin then interior penis,this is with or without a wrap. Any idea on some techniques to use to avoid that.It is still quite comfortable and that is even with using eight pounds,but I am not getting the maximum effect. The reason I know is that I am able to stretch it farther with my hand without seeing nearly as much skin stretching.Any thoughts on this?

PEace

Jman,

I’m glad you finally got it put together. ‘A’ for effort…….

I can’t say enough about the benefits of the Wench breaking in. When I use the term “breaking in” I’m mostly referring to the Velcro cylinder that is the main body of the device. Other parts, such as the Grippers and the CableClamp have very little room for wear - although I will say that I’ve noticed a small difference in how tight I am able to close one CableClamp to the next. There seems to be minute differences between my clamps even though they look identical to the eye. You might want to try a different clamp if you bought the package that has two mediums.

Back to the Velcro cylinder— This material breaks in beautifully after a few days of use. A groove will appear at its horizontal center as the clamp begins to flatten the raised “hooks” that it tightens against. Also, the Velcro as a whole becomes more flexible, or “floppy”. Not a enough to compromise its strength but enough to make easier the closing of the clamp to its tightest possible tooth. You might want to beat it up a bit— twist it and fold it for a while to expedite the breaking in.

A member here noted that he resolved the issue of more skin-stretch than internal stretch by finally getting the nerve to really close that clamp as tight as possible. I understand a persons hesitance to push things beyond what feels comfortable. But once you get over the fear and do it you’ll find that any pinch or discomfort you experience will quickly fade. Especially as your boy gets stretched with the tension of the weight you apply.

Also, be sure to wait a minute before tightening to the maximum. If you’ve gone as tight as you think possible but still see too much skin-stretch when you test pull the Wench, sit back for a minute and let your penis conform to the pressure, then give it another shot.

Take advantage of the ergonomic design of the clamp and tighten it accordingly. There is a nice place for your thumb to sit on one side of the clamp. Try to use it effectively. You’ll get more force into the motion of tightening.

There are plenty of other tricks to getting a maximum clamp squeeze - like being sure to use heat to loosen your internal tissue as much as possible - and maybe we’ll get into these things here. But for now, try some of these things and above all else have just a little patience - it gets easier as you get more familiar with the Wench.

Thanks J

-Cap

Quote
Originally posted by PirateSteve
In fact, we are much more intimate now than we ever have been. Would that I had such luck in my next life.

That is if and when women start enlarging their private parts using co-opted tools and hardware!

Thank you cap. The ” Wench” has already developed the grooves you mentioned. I have been using it for a few days but not with any weight until today.I have got it on pretty tight , I am really straining to get to three clicks.I think I will try and see if there is more room for an added click after wearing it for a minute. I just used a rice sock and will see if that makes a difference. Thanks for the input Cap. I really appreciate your feedback . I will keep you posted .Thanks again

PEace

Thank you Captnhook

I found this thread last night and ran to Wal Mart & Lowes to get all the parts. It was really easy to make and I am hanging with it right now. It is very comfortable. I have alot of skin and it is hanging over my head. Is this the proper way that it should be on? I have the wrap about 1 inch below my head but when I put the Wench on all my skin moves forward and the wench is sitting just right below my head. Could you give me any Tips that I could use to make it a better fit.


What are you gonna do? Sic your dogs on me? Or your bees? Or dogs with bees in their mouth so when they bark they shoot bees at me? I think Mr. Smithers picked me for my motivational skills. Everyone always says they have to work twice as hard when Im around! Its not easy to juggle a pregnant wife and a troubled child, but somehow I managed to squeeze in 8 hours of TV a day. Getting out of jury duty is easy. The trick is to say youre prejudiced against all races. - Homer Simpson.

In reply to the Captn’s earlier post, I bought some more grippers today from the local DIY store (Bond&White) and the product I got is called ‘Felt Gard Heavy Duty Felt Pads”, by “shepard hardware products”. It consists of two 4-1/2”x6” pads for use on tables,chairs,& appliances. This should work with the wench I’m going to make, I have ordered the velcro from Mr.Office however still havn’t found cable clamps locally, hopefully I will have made my wench in about a week.

Thanks everyone that contributed to this thread and especially CaptnHook and all his inspirations for sharing his ideas.

Max-
To avoid the risk of repeating myself I’ll need more precise information.

>I have alot of skin and it is hanging over my head. Is this the proper way that it should be on?<

What is hanging over your head - the skin or the Wench? The Wench should not end up past the coronal ridge when weight is applied.

>I have the wrap about 1 inch below my head but when I put the Wench on all my skin moves forward and the wench is sitting just right below my head. <
Do you use the word “below” to mean “behind” as in:

I have the wrap about 1 inch BEHIND my head but when I put the Wench on all my skin moves forward and the wench is sitting just right BEHIND my head.

Let me know what your wrapping with and how much of it you use. It sounds as though the source of your problem is in your wrapping technique.

Thanks Max —Cap

Quote
Originally posted by CaptnHook
Max-
To avoid the risk of repeating myself I'll need more precise information.

>I have alot of skin and it is hanging over my head. Is this the proper way that it should be on?<

What is hanging over your head - the skin or the Wench? The Wench should not end up past the coronal ridge when weight is applied.

>I have the wrap about 1 inch below my head but when I put the Wench on all my skin moves forward and the wench is sitting just right below my head. <
Do you use the word “below” to mean “behind” as in:

I have the wrap about 1 inch BEHIND my head but when I put the Wench on all my skin moves forward and the wench is sitting just right BEHIND my head.

Let me know what your wrapping with and how much of it you use. It sounds as though the source of your problem is in your wrapping technique.

Thanks Max —Cap

Sorry Cap Yes I did mean behind my head. I’m hanging right now and this time I used a different wrap it is a self adhesive ace bandage that sticks to itself and not to the skin. This time I wrapped even half my head so it would not slip past it. I have the wench on tight. This time there is no skin hanging over my head. I will try different ways to see what works best.
When you wrap do pull your skin back towards your base? Do you wrap your entire penis? Because I was only wrapping the part the wench would sit on.
Thanks


What are you gonna do? Sic your dogs on me? Or your bees? Or dogs with bees in their mouth so when they bark they shoot bees at me? I think Mr. Smithers picked me for my motivational skills. Everyone always says they have to work twice as hard when Im around! Its not easy to juggle a pregnant wife and a troubled child, but somehow I managed to squeeze in 8 hours of TV a day. Getting out of jury duty is easy. The trick is to say youre prejudiced against all races. - Homer Simpson.

Hi,

First of all I would like to congratulate you for a good idea.

I have made a hanger but at the moment I don’t find the Cable Clamp and I have use the metal hose clamps.

Now regarding

”To the experienced hanger, the Wench and all of its advantages and disadvantages should quickly become evident.”

I Have attach on the back side of the Wench two Iron plates using soft catch-strip, one for each Gripper rectangle.

The idea is that when you use the cable clamp the Grippers don’t bend in the middle.

Maybe you will understand from my picture what I want to say.

Thanks Again for your good Idea.

Pasi

Hey cap’n!

Continuation from other thread (whose title will remain unnamed to save ye blushes. It’s all true though ;) ) I have been using a soft cotton material wrap. A 2” wide section (about 12” long) of bicycle inner-tube is then used for a wrap (theraband substitute! (ha)) . Then the wench, which I made from the same dimension of inner-tube. The 1x2” ‘lateral penis grips’ I fashioned from some hard rubbery foam that came with a wrist watch I bought (a large rubbery cylinder that the watch was fastened around). Heavy duty Velcro was used for all fastening/attachment points.

The Inner-tube may sound flimsy, but when wrapping the wench round your penis (man what an image) the stretch of the inner-tube gives a good grip. There is no give with gravity of the wench as you might expect (with 17lb that is). The blue 1x2” foamy rubber bits I had to make about 1cm thick as they have more ‘give’ than the material you describe, but it’s seemingly working. The clamps help make the grip total. (good for crazy uli’s!)

17lb is a cinch for me right now, but am getting decent fatigue with 2-3 20min sets a day.

My effort is rough ‘n ready, but I wouldn’t be hanging this much without you cap’n. A glass of rum.. ‘chink’ cheers mi hearty!

Oh yea. ‘skint’ means no money, poor funds :( Sorry for the colloquialisms

stump

Attached Images
roughwench.jpg
(20.5 KB, 160 views)

Hi again Captn.

Here is the picture

Pasi

Attached Images
captn\'s wench.jpg
(9.2 KB, 195 views)
Top

All times are GMT. The time now is 10:36 PM.