Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Question regarding length of cylinder

12

Question regarding length of cylinder

Hey guys,

I am using the Bathmate Goliath for quite some time now and I still love it.

However, due to privacy reasons, I also want to buy an air pump. I have more time to use an air pump than a water pump (allthough I will continue using the BM).

I don’t want to pay customs fees etc. so I want to order my air pump in the EU. I found this one:

http://www.lederwerkstatt.eu/de/pen…laengerung.html

I have a question regarding the length. The page says the the inner length of the cylinder is 21 cm (8.26”). My BPEL is 18 cm (7.1”). Is the length of the cylinder enough or should I better look for a longer cylinder?

At maximum pressure in the Bathmate I get a length of 20.5 cm (8.07”)

Also: Anyone knows the LAP cylinder? Is it a good brand?


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Just found out that www.thickwall.co.uk is also in the EU. They have a larger assortment of pumps than lederwerkstatt, and they are even cheaper. Starter sets are in the 100 Euro area.

Does anyone know about the quality of the thickwall stuff? Is it comparable with LAP?


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Originally Posted by BMU1
Just found out that www.thickwall.co.uk is also in the EU. They have a larger assortment of pumps than lederwerkstatt, and they are even cheaper. Starter sets are in the 100 Euro area.

Does anyone know about the quality of the thickwall stuff? Is it comparable with LAP?

Both Thickwall and LAP feature professional thick walled cylinders that will basically last a lifetime. The difference is the LAP package comes with a durable metal and brass pump while the Thickwall package comes with a less durable plastic pump. The main thing is you get a pump with a gauge.

The basic length of the cylinders for each is 9” and you choose the diameter based on your girth. You can purchase longer cylinders, but the 9” is right for you.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

I discussed Thickwall and the cheaper way to get a really good brass pump here: /penis-pumps/good-pump.v3.html#post2098381

I’ve used Thickwall for quite a while now. It’s really good stuff.

If you are already getting 8” in the Bathmate, I would suggest a 10” cylinder. There’s never any harm in having a little extra cylinder length.


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

Many thanks for the replies guys!


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Got two thickwall cylinders. They’re my pride and joy.

Originally Posted by DomXZ

Got two thickwall cylinders. They’re my pride and joy.

They are nice! :)


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

Can I take one of the starter kits (http://www.thickwall.co.uk/starterkits_eur.htm) or should I buy cylinder and pump extra to get the more expensive pump (http://www.thickwall.co.uk/pumps_eur.htm)

I mean, is the quality of the pump that is included in the starter kit ok or should I go for the expensive pump?


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

The metal pump is a much more durable pump. Plastic pumps have a bad history of handle breakage.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Did you read the link I put in my post 6 posts above this? You can get the high quality pump much cheaper than buying it from Thickwall, and it’s the same kit. Just remember to order the hose connector as well, when you order your cylinder.


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

Got my pump from Thickwall today and had to try it immediately of course.

Very comfortable. I was very carful and did not pump over 3 hg/in and stayed in for only 10 minutes. Got a BPEL of 18.5 cm = 7.3” in the tube. Wondering how much it would be with 4 or 5 hg/in.

Very nice “feature”: The 2” cylinder fits perfectly in my BM Goliath, and the pump also has place in the bag that came with the Goliath. So I can store both the Goliath and the air pump in the bag - very space-saving!

I don’t know if I like the BM or the air pump more, time will tell. One advantage of air pumping is that I don’t have to fill the bath tube, so air pumping is “quicker”, and I can air pump even at night when the family sleeps. That wouldn’t be possible with the BM because the family would be curious if I would fill the bath tube every night. So I can air pump more often than water pumping, that’s for sure.


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Thanks, will do :)

I’ll keep you updated on gains (hopefully) ;)


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Ok, I started with 10 minutes at 3 hg, now I am pumping 13 minutes at 4 hg.

My penis is packing the tube at the first one and a half inches. Not sure if this is a problem, but I want to go for length anyway.

What I noticed: When I used the BM Goliath (2 x 10 mins), my penis was much more engorged after the workout than it is with the air pump now. I have almost no engorgement after the workout. Is this because I am pumping only 13 minutes per session so far? Or could it be because I am packing the tube at the base? Might this be prevent the penis from engorging?

I can post photos tomorrow if this helps.


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Another info that might help. My BPEL is 18 cm (7.1”). In the BM, at full pressure, I get 20.5 cm (8.1”), but in the air pump at 4.5 hg I get only 18.5 cm (7.3”). Is this normal?


BPEL: 6.7 > 7.1 > 8.0

EGM: 5.7 > 6.5 > 7.0

My previous EGM goal was 6.5 inches. Now that I reached that in 2016, I set a new goal with 7.0 inches.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Serious question, Can your penis get stuck in the cylinder when pumpingHannibal LecterPenis Pumps504-10-2010 10:11 PM
Question for board senior members about length gain and not girth.dtznuffPenis Enlargement Basics603-07-2010 04:03 PM
First post; length question.ED123Penis Enlargement Basics602-19-2009 03:22 AM
Length Question and PE theoryjustlearningPenis Enlargement Basics101-10-2008 12:30 AM
Length QuestionjustlearningPenis Enlargement Basics401-02-2008 03:47 PM

All times are GMT. The time now is 05:15 PM.