Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Cock Coil ADS

Originally Posted by dickerschwanz
Would one be able to use a CC over a silicone sleeve?


Yes. Slight loss of low profile stealthiness, but yes.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by dickerschwanz
Would one be able to use a CC over a silicone sleeve?

Xeno is right but as one who uses sleeves in pumping I think the sleeve would be counter productive. Using the CC over a HTW gives you the comfort you need but also allows you to stretch which the silicone sleeve would make difficult. The CC without the sleeve also gives you more control over the compression. Cannot see any benefit using the sleeve this way.

Regards
Fred

Originally Posted by austfred
If you get stuck you can get some Goody Girls ones from Monty at PE Weights at a fair price. When you check for hairbands in the shop make sure they stretch in both directions. Most of them don’t.

I ordered some from Monty and while I was waiting for them to arrive I finally found some Scunci ones in a local department store here in Australia after weeks of searching that also work even though they are wider than the recommended ones.

Fred

OK thanks

Originally Posted by austfred
Xeno is right but as one who uses sleeves in pumping I think the sleeve would be counter productive. Using the CC over a HTW gives you the comfort you need but also allows you to stretch which the silicone sleeve would make difficult. The CC without the sleeve also gives you more control over the compression. Cannot see any benefit using the sleeve this way.

Regards
Fred


Excellent input Fred; thank you for that helpful extra info.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by BeardedDragon
Has the CC configured in a cock ring style been your main post girth workout cock ring over the years?


Sorry for the delay with getting to this BD; had to think about it a bit. The fact is that I’ve never employed a purely girth focused gains campaign. Was almost entirely focused on length until reaching 8.375” BPEL, then began campaigns focused on both EL and EG, something than continues with recent (and future) campaigns. Having said that, the answer is that because length has become much harder for me to gain than girth, I utilize a CC (or two) for the P-phase of my gains campaigns…with the intent being to promote cell proliferation along the axis of tension, lengthwise, that it produces. Long way of saying “yes” :) .

Having said all of that, it would be remiss of me if I didn’t mention that IF I was to employ a purely girth focused gains campaign, I would use this magnetic/velcro cock ring for the P-phase.
Tiger 10 010.JPG
I find it hard to believe that the magnetic field that this thing puts out can have any real effect on blood flow/state of engorgement, but the fact remains, I observe a very noticeably larger flaccid, in particular, girthwise, when wearing it.

Anyhoo, hope that’s helpful.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Anybody with some feedback yet on increases?

Magnetic cock ring?

Sorry for getting off topic but has anyone ever used magnetic tape?


Greetings, Starfighter! You have been recruited by the Star League to defend the Frontier against Xur and the Ko-Dan Armada.

Originally Posted by xenolith
Sorry for the delay with getting to this BD; had to think about it a bit. The fact is that I’ve never employed a purely girth focused gains campaign. Was almost entirely focused on length until reaching 8.375” BPEL, then began campaigns focused on both EL and EG, something than continues with recent (and future) campaigns. Having said that, the answer is that because length has become much harder for me to gain than girth, I utilize a CC (or two) for the P-phase of my gains campaigns…with the intent being to promote cell proliferation along the axis of tension, lengthwise, that it produces. Long way of saying “yes” :) .

Having said all of that, it would be remiss of me if I didn’t mention that IF I was to employ a purely girth focused gains campaign, I would use this magnetic/velcro cock ring for the P-phase.
Tiger 10 010.JPG
I find it hard to believe that the magnetic field that this thing puts out can have any real effect on blood flow/state of engorgement, but the fact remains, I observe a very noticeably larger flaccid, in particular, girthwise, when wearing it.

Anyhoo, hope that’s helpful.

xeno

Thanks, and interesting. I like the strategy of keeping a length mindset while employing a routine that hits everything, and then letting the girth gains come as they do. I’ve tried various cock rings and other solutions to maintain a post workout flaccid engorgement, and nothing has ever wowed me yet. Last couple days I experimented with the CC and I could get a temporary effect, but as my post workout flaccid diminished, I had to continually tighten the CC until it was more or less in a standard configuration by 20-30 minutes later. I’m going to keep testing, using a shorter coil (perhaps starting with 12-18” of lead).


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

[QUOTE=xenolith]
Having said all of that, it would be remiss of me if I didn’t mention that IF I was to employ a purely girth focused gains campaign, I would use this magnetic/velcro cock ring for the P-phase.
Tiger 10 010.JPG
I find it hard to believe that the magnetic field that this thing puts out can have any real effect on blood flow/state of engorgement, but the fact remains, I observe a very noticeably larger flaccid, in particular, girthwise, when wearing it.
/QUOTE]

Xeno,

I wonder if the magnets had any effect. The velcro cock ring even without the magnets should give you a larger flaccid and if one of the magnets was strategically placed over the dorsal vein the effect would be enhanced. What do you think? Can’t do any harm anyway. I’ve played around a bit with magnetic belts for sciatica and sill an not sure if the perceived benefit is placebo or not.

I wear a metal cock ring while having sex and it does give me that extra hardness. Don’t leave it on too long though.

As far as girth gains are concerned, I got mine mainly from dynamic pumping with my Mr Fantastic pump.

Fred

Don’t want this thread to get off topic too much; with regard to the cock ring thing, all I can say is that I THINK (read: do not know) that the Nd magnet encased velcro cock ring supports girth growth more than any configuration of CC; but that, in terms of P-phase VOLUME (read: length and girth) support, my experience indicates that use of a CC is better indicated.

So…for optimal P-phase work in support of BOTH length and girth (read: volume), I’d recommend a (snugly coiled) CC length that is about 0.5” less than your NBPFSL that you wear as much as you can between I-Phase work.

Just my anecdotal, empirically derived evidence…as always, use it at your discretion.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama


Last edited by xenolith : 11-14-2014 at .

Originally Posted by rootsnatty
I have been reading about the densities of many metals. I believe platinum would be the best as it is even denser than gold but just as malleable. However, I have decided to go with uranium as it is almost as dense as platinum but, unlike platinum or gold, it will give my cock that much sought after “healthy green glow.”

The process of acquiring the uranium was relatively simple, I simply walked into one of the many chop-shops in my area and the owner put me in touch with his Russian mafia connections, who in turn put me in touch with a corrupt Russian General who had fallen on hard times and was eager to make some extra cash by selling off a part of the former Soviet nuclear arsenal. Nobody asked any questions, it was business as usual.

Bringing the ICBM I had purchased at a very reasonable price back into the United States was a simple process as well. I thought about asking to have it mailed to the US labeled as “hair care additives,” but in the end decided to just go over there and pick it up myself. I flew in, and met the General who was very happy to see me and my $500 check. He joyfully showed me my new missile and even provided a military convoy to help me transport it to the sea.

I arrived at the Polyarny Inlet where I waved goodbye to my new Russian soldier friends. I proceeded to commandeer the prototype Typhoon-class Russian submarine the Red October. I loaded the missile into one of the Red October’s missile tubes, dived into the sea, and engaged the caterpillar drive. I had a pleasant run back to the United States coast. After the fact I learned this caused a small international incident, but I didn’t notice.

After unloading my missile I put it in the back of a rented pick-up truck and drove home. I had to take it to my parents’ house to remove the uranium as it would not fit in my apartment. I told them it was a science fair entry as I did not want them to know I was constructing a cock coil.

Removing the uranium was easy enough. There was one brief scare when I accidentally activated the detonation countdown, but I was able to diffuse it in time.

Long story short, I am now the proud owner of a uranium cock coil! It works so good! And I am happy to report that my cock is now glowing a pleasant and vibrant shade of neon green. Just beautiful. Also, there was one unforeseen benefit: there is now a small arm growing out of the side of my cock, it waves to me when I am feeling blue and the sexual implications are endless. I am presently teaching it sign language so we can communicate better.

I now have this ICBM just sitting in my parents’ backyard. They haven’t said anything yet, but the neighbors seem to be getting suspicious. I want to get it moved before the neighbors put two and two together and realize I extracted the uranium to build a cock coil.

I have been in contact with several Islamic fundamentalist groups who want to use the missile shell and remaining enriched uranium to make something called a “dirty bomb.” I want to support them in their fight against the infidels - from what they tell me, these infidels seem like really terrible people - but I would much rather sell the missile to one of my friends at Thunders so they can also enjoy a uranium cock coil like mine! “Snug tug, mo’ glow.”

Let me know if you are interested!

LMAO, sorry for the bump but… funniest post I’ve read on thunder haha

Had first attempt today with my own CC. Find it difficult to roll on the HTW without damaging the ends where it has been cut - already destroyed one which laddered all the way up - seems that once they are cut, they damage very easily. Anyone has a solution for making the ends robust before first use? I’d imagine something like a sports compression bandage of some kind would be more suitable (no idea if they exist in required size though).


Start: 6" BPEL x 5" EG (mid)

Current: 7.5" BPEL x 5.98" EG (average distal/mid/base shaft)

Goal: 8" BPEL x 6.5" EG (whole shaft)

Try another brand of hair tie model waterman. The original Scuncii model is NLA but there are others that will perform similarly.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

I had the same flimsy HTWs, waterman. After some time I found a partial solution. If you keep the top and the bottom of the HTW partially rolled, the ends are never fully exposed, and there are fewer runs in the fabric. At first it will want to unroll itself and expose the ends, but after a few sets, it will retain the rolls on top and bottom naturally. I’ve now been able to use my current HTW for somewhere around 200 hours of ADS, and could probably get another 200 out of it before switching. Hope that helps.


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Top

All times are GMT. The time now is 09:58 AM.