Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

My Experience and reviews of Heat Sources

Originally Posted by ThaiKhun
Where can I get an IR light here in the States ? Those Philips models mentioned above don’t ship to the U.S. Thanks

Just go to any store that sells lightbulbs. Walmart, Target, Home Depot.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by Sound Edge

I’m more worried about my eyes to be honest. Even after looking at my dick in the light for a couple minutes I see everything in a different color for a little while.

Very valid point. Try not to look at IR bulbs more than you have to. They are viciously bright.


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

Personally, I think IR lamps are a bit of overkill. They heat up everything in sight. They heat your legs, your arms, your torso, your chair, your carpet, your house. I mean there is a lot of heat going everywhere.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by firegoat
Very valid point. Try not to look at IR bulbs more than you have to. They are viciously bright.

Yeah, I use sunglasses when applying my IR to protect the eyes.

But as someone wrote in another thread: Imagine yourself sitting naked and sweaty pulling your dick in front of a glowing red light, with a couple of nifty sunglasses on, and suddenly your wife/sister/mother walks in. Hahaha.


05-15-2008 Bpel 5.7" Msg 4.5"

03-03-2010 Bpel 7.2" Msg 4.7"

Scipio81, quest for girth

Woah, I didn’t expect the sudden burst of posts on this topic here.

Later tonight when I get back I’ll try and respond to everyone.

Originally Posted by _cobey_
Hey jawbone, can you tell me which particular heating pad you used?

Thanks


Originally Posted by ThaiKhun
Which Heating Pad brand and model did you use to make the Heat pump?

Thanks


Yes I can, it’s called SoftHeat, bought at London Drugs:
Http://www.londondrugs.com/Cultures…76&ProductTab=3

The parts can easily be acquired at an electrical store if you’d like to save a few bucks and know what you’re doing. I didn’t but it just looks like 3 wires and a switch essentially.

Originally Posted by gprent
For pumping, I prefer the Kaz Smartemp microwave heatpad that I can wrap around the cylinder. 4.5 minutes of microwave gives 45 minutes of heat. Http://www.kaz.com/kaz/store/produc…87cd485b1c71a11 You can find it at Target for about 13 bucks.

Looks good. Does that heating pad wrap around nicely? Ideally I was looking for a usb cup warmer that would wrap around a mug instead of sit underneath it. Alas, I couldn’t find one. 45 minutes of heat you say? What is the material? I’m a bit curious because you also mention 4.5 minutes in the microwave (1200 watt I assume?).

I didn’t initially like the prospects of semi-permanently adhering wires to my cylinder but decided to go through with it because I was liking the idea of being heated in the tube by just plugging it in.

There were a few difficulties heating the tube with the standard heating pad.
1. It was difficult to get good heat transfer. The heating pad wouldn’t wrap in a circle but more in a hex and touch certain areas.
2. My hand would get uncomfortably warm, and fumbling with tieing it or making it into a slip-on didn’t work too well.
3. I couldn’t see anything.

Originally Posted by iDare
What do you think about the “warm shower” method of warm-up/down?

I love it! The warm shower is probably my favourite method of relaxing when I have the time to do so. It also weighs on my conscience with the amount of water throughput. The shower, and bath, since childhood has been a place of thinking and relaxation for me.

Hot Shower
Directions: There are so many different methods of using the hot shower.. With a constant supply of hot water it can be combined with a hot cloth, submerging your penis in a glass to heat etc.

Ease of Use: 5/5
- Run the shower.
Time of Setup/Maintainability: 3/5
- Turn on, heat, turn off.. Dry off. The whole process is pretty lengthy.
Heat Absorption: 4/5
- I don’t usually get awesome heat retention with this method. No matter how long my penis has been in a warmup.
Disturbance: 4.5/5
- Virtually none. Just integrate it with your shower routine. The thing that disturbs is the length you take your shower and the noise of the shower itself. If you live with light sleepers sometimes hot showers at night is difficult.

Originally Posted by nickymdh
I find that my skin is too dry or something with shower method. It just doesn’t feel right for some reason - doesn’t feel like I’m warmed up and every bone in my body tells me not to go yanking my yoke at this point!

I have privacy issues too so rice sock is out of the question.

Does anyone know what kind of shop sells heating pads?

Hmm.. Try applying olive oil perhaps if you want to jelq after? Sometimes it’s hard to get a good warmup in the shower, but sometimes I can. I don’t think I explored this area enough to know the recipe for a great shower warmup.

Most health stores sells heating pads.. They’re under the sections of heating pads and wraps.

Originally Posted by firegoat
I’ve tried everything over the years! There are many good options, but the IR lamp is king as far as I’m concerned.

The testicle heating problem is very real with the IR lamp though. The only time you want cooked testicles is in a restaurant after a bull fight. Ideally they should be bull balls, not your own.

Use a fairly thick piece of white cloth (white reflects the light back) over your testicles and all will be fine!

I’m not exactly sure how to wear the cloth? Do I hang it like a bib? (Actually that may just work and I think I just answered my own question).

Originally Posted by Blakmajic
Hey guys is this just a pump cylinder with the original internal parts from a heated electrical pad taped and wrapped around the cylinder, or is something that is sold as a whole??

Picture: http://img204.imageshack.us/my.php?image=dsc0098jv1.jpg

It’s just a pump cylinder with the original internal parts from a heated electrical pad.. I could discuss this more with those more electrically inclined, improve the design.. Make it more waterproof.. Detachable etc.. And sell it as a unit but I’d rather post instructions at some point and have people make their own and post back with their feedback/improvements. As I discussed in PM the parts could *easily* be picked up at a hardware store instead of spending money on a heating pad.

:)

Originally Posted by Sound Edge
I have a 100 watt ‘reptile’ IR lamp and it clamps to the underside of my desk very nicely. I have it so that it is always aiming at the left side of my dick (and supposedly penetrating through to the right side because it’s infrared). I don’t even have to cover my balls because they take very indirect light from it and don’t experience an increase in temperature. I’m more worried about my eyes to be honest. Even after looking at my dick in the light for a couple minutes I see everything in a different color for a little while. I’d love to find one of those invisible infrared bulbs, but Walmart only sells them in 200W.

I also use the IR lamp when pumping. Sometimes I’ll even hold the pump with one hand and move the light around with the other. It feels really warm and constant, no complaints. IR head definitely has my vote.

Reading replies like this makes me want to take a closer look at IR lamps. Thanks.


Last edited by Jawbone : 09-23-2008 at .

Originally Posted by Jawbone

I’m not exactly sure how to wear the cloth? Do I hang it like a bib? (Actually that may just work and I think I just answered my own question).

Although it doesn’t work with all exercises, one method is to keep your underpants on and covering your balls, then tuck the cloth into the waistband and let it hang over, much like a bib.

If PE goes mainstream, we will have to invent the patent ‘Ball Bib’ for IR users! :)


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

I use a product called “the bed buddy.” I bought it at bed bath and beyond for my lower back a long time ago, but I have given it to my PE fund.

It is the same as a rice sock but it has something else inside to absorb the heat, just two minutes in the microwave and it is hot for about 45 minutes, long enough to warm up before and after without reheating.

This thing is about a foot and a half long and three inches wide, enough to wrap just your cock, or both if you prefer. Also has two rope handles at either end so you can shift it around to cool it down if you nuke it to long.

All in all it only cost 10 bucks, it’s durable, stays hot for along time, gives a nice moist intense heat, and you don’t come up with any missing socks.

I noticed many of you prefer the IR lamp but you need sunglasses to use them, I used to own reptiles and there is a bulb designed to heat without the shine, it was to reduce the stress of the animal.

It is a porcelain heat lamp it’s definatley more expensive than a regular bulb, but it throws immense heat and will last you a very long time (I had mine for six years and it went with the animals perfectly functional.)

Plus if you are trying not to wake someone up it may help out.

Take a look on ebay and you might find a good bargain.

Just a note, someone did something like I did but had very different results, primarily with it being “clumsy”:

Originally Posted by Sound Edge
Back on topic, I had bought one of those cheap heating pads. I took it apart and wrapped the wire around my tube. In my experience, this sucks. It makes it clumsier even though you don’t have to physically hold the pad around the tube for the entire session. Realizing I should still do a warmup first, I bought an infrared lamp at the pet store. I do manual stretches in front of the thing and my dick starts to feel nice and warm. Then I begin pumping and hold the cylinder fairly close to the lamp. I did not expect it to work so well. The heat made it all the way through to my dick and after a five minute session it was still very warm. So I will advocate skipping out on a heat pad and just go with the IR lamp!

Now, two completely different perspectives on the same device (pretty much), I love it when this kind of stuff happens.

I just ordered this one.

Http://www.allegromedical.com/perso…in-p215074.html

I know it’s a little expensive. I figure I can use it around the tube when pumping. I have not received my pump yet. I work out two to three times per week with weights and aggravated my left elbow doing skull crushers. I believe this will help with the elbow. I also have bad wrists from heavy shrugs years ago. Even had to have cortisone shots in my wrists for that. So, I’m looking at using this heating pad for more that PE.

Today I bought an infrared heat lamp, composed of a 250 watt Sylvania bulb and a porcelain socket with clamp by Prime Wire and Cable. I found them at Dixieline.

Application is as follows.

I pull out the bottom drawer on my bathroom vanity, clamp it on with the lamp facing up and about 10 inches below my wiener as I stretch it outward. I wear boxer shorts, pulling my pud through the fly. I also pull my sweat pants down far enough to expose my dick but cover my balls. I figure this will give me the best warming. Alternatively I could wear a heat lamp on my head for even better penetration.

Nah. That would look silly.

Originally Posted by ThaiKhun
Today I bought an infrared heat lamp, composed of a 250 watt Sylvania bulb and a porcelain socket with clamp by Prime Wire and Cable. I found them at Dixieline.

Application is as follows.

I pull out the bottom drawer on my bathroom vanity, clamp it on with the lamp facing up and about 10 inches below my wiener as I stretch it outward. I wear boxer shorts, pulling my pud through the fly. I also pull my sweat pants down far enough to expose my dick but cover my balls. I figure this will give me the best warming. Alternatively I could wear a heat lamp on my head for even better penetration.

Nah. That would look silly.

Thanks for the tip, I haven’t yet actually bought a heat-lamp.. I probably will in the new year to test it out.

If you could pack a heat lamp neatly into your pants providing nice temperature throughout the day… I just wonder if anyone would suspect the glow coming from your crotch?

laughs


Size is little more than a controllable perception without an accurate means of measurement.

Originally Posted by ThaiKhun

Today I bought an infrared heat lamp, composed of a 250 watt Sylvania bulb and a porcelain socket with clamp by Prime Wire and Cable. I found them at Dixieline.

Application is as follows.

I pull out the bottom drawer on my bathroom vanity, clamp it on with the lamp facing up and about 10 inches below my wiener as I stretch it outward. I wear boxer shorts, pulling my pud through the fly. I also pull my sweat pants down far enough to expose my dick but cover my balls. I figure this will give me the best warming. Alternatively I could wear a heat lamp on my head for even better penetration.

Nah. That would look silly.

Although IR penetrates well, I have the lamp at the height of my penis, so when I stretch straight down, it shines on the top (toughest tissue to stretch); when I stretch to the sides it shines at the sides, and when I stretch up it shines at the underside.

Good work on covering your testicles.


Heat makes the difference between gaining quickly or slowly for some guys, or between gaining slowly instead of not at all for others. And the ideal penis size is 7.6" BPEL x 5.6" Mid Girth.

Basics.... firegoat roll How to use the Search button for best results

Hey everybody how are you all doing? I am thinking about getting something like this infrared heat source but am wondering is it safe to use and and for how long exactly can you use it? Thank you for listening.

Top

All times are GMT. The time now is 02:43 AM.