Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

VacExtender 4.2

Originally Posted by dtwarren1942
I use the red silicon sleeves on my Vac3 and average over a year (extending six days a week) before they start to get “over stretched”). Never had one tear.

I just got a Vac4.2 and tested it without the sleeve and could not maintain a vacuum. Hopefully, when I use it with a sleeve I can maintain a vacuum. If not, I guess I ordered the wrong size.

The system is not designed to be used without the sleeve.

Originally Posted by K_F_H
Ahhh okay, I think I may be describing the wrong piece. I’m referring to the ‘vacuum ring’, made out of a soft gel-like material, not the silicone compress sleeve. MB looks like he has a new model of the ‘vacuum ring’ so I wonder if that is of better quality.

Yes. That piece is almost like jelly. This is by design also to provide a seal but not put restrictive compression on that area to which it is applied. But it should last quite awhile if treated gently. Avoid ripping it off and pulling it inside out. Follow the instructions on the website to properly apply it without damage. Keep other objects from smashing on top of it. I keep mine separate from the other components in a small Tupperware container with a lid.

Originally Posted by Ectospasm
I intended to get an erect measurement when I get to 900 hours of extender use.

Hey man, how are things going with the VacExtender? How many hours have you logged so far?


Started: 6.75" BPEL, 8" (20 cm) BPFSL (1/2015) x 5" EG; Current: 7.8" (19.5 cm) BPEL, 8.2" (20.5 cm) BPFSL x 5.3" EG; Gains: 1.05" (2.625 cm) EL, 0.2" (0.5 cm) BPFSL x 0.3" EG

Short-term goal: 8" (20 cm) BPEL, 8.3" (20.75 cm) BPFSL x 5.5" EG; Long-term goal: 9" (22.5 cm) BPEL x 6" EG

Xtended's Progress Report

Originally Posted by Ectospasm
Yes. That piece is almost like jelly. This is by design also to provide a seal but not put restrictive compression on that area to which it is applied. But it should last quite awhile if treated gently. Avoid ripping it off and pulling it inside out. Follow the instructions on the website to properly apply it without damage. Keep other objects from smashing on top of it. I keep mine separate from the other components in a small Tupperware container with a lid.

It has lasted quite a while, but obviously it loses strength and becomes increasingly weaker through regular use. I think I’ll get another soon. Keeping it in a tupperware container sounds like a good idea. Taping across the corona sounds interesting, I may give it a try.

Originally Posted by xtendeddick
Hey man, how are things going with the VacExtender? How many hours have you logged so far?

Extender use has been spotty last several days due to family visiting forcing me to use my ADS gear. But tomorrow will be back to normal so I should be able to get several hours per day in. I’ve got about 157 hours in now. The more I read on Thunders’ makes me realize that diligent work over a one year period is the right outlook to have.

Originally Posted by Ectospasm
Extender use has been spotty last several days due to family visiting forcing me to use my ADS gear.

What kind of ADS gear do you have?


Started: 6.75" BPEL, 8" (20 cm) BPFSL (1/2015) x 5" EG; Current: 7.8" (19.5 cm) BPEL, 8.2" (20.5 cm) BPFSL x 5.3" EG; Gains: 1.05" (2.625 cm) EL, 0.2" (0.5 cm) BPFSL x 0.3" EG

Short-term goal: 8" (20 cm) BPEL, 8.3" (20.75 cm) BPFSL x 5.5" EG; Long-term goal: 9" (22.5 cm) BPEL x 6" EG

Xtended's Progress Report

Originally Posted by xtendeddick
What kind of ADS gear do you have?

In addition to this:

Another All Day Stretch ADS Idea

I also use one of Monkeybar’s Xsleeves (blue) with the 9oz weighted cap.

My VLC-tugger came in the post today. It’s extremely comfortable but as I feared it is just not suitable for high levels of tension on the extender unless you have a lot of foreskin. I’m stretching at 19.7cm with my VacExtender mod but can only reach 16cm at a real push with the VLC-tugger and an extender and 16cm is my NBPEL, so I’m not sure how much of an affect that would have.

The good thing about the VacExtender is that you really can get a solid hold, it’s almost impossible to fall out of it if you have a proper seal and a strong vacuum. I think I’ll compliment my extending routine using the VacExtender with the VLC-tugger as an overnight ‘ADS’ (or ANS).


07/10/14 - 6.5" BPEL - 5.5" MsEG

29/01/15 - 7" BPEL - 5.5" MsEG

Originally Posted by Ectospasm
In addition to this:

Another All Day Stretch ADS Idea

I also use one of Monkeybar’s Xsleeves (blue) with the 9oz weighted cap.

We have similar devices. I use XSleeve with the weight (smaller one) and my PP has a similar set up to the one you built.


Started: 6.75" BPEL, 8" (20 cm) BPFSL (1/2015) x 5" EG; Current: 7.8" (19.5 cm) BPEL, 8.2" (20.5 cm) BPFSL x 5.3" EG; Gains: 1.05" (2.625 cm) EL, 0.2" (0.5 cm) BPFSL x 0.3" EG

Short-term goal: 8" (20 cm) BPEL, 8.3" (20.75 cm) BPFSL x 5.5" EG; Long-term goal: 9" (22.5 cm) BPEL x 6" EG

Xtended's Progress Report

Originally Posted by Ectospasm
I think it is a matter of brand quality. Better to pay a bit more and get something that works. I’m in the process of making a custom glans piece for my Vacextender that will add even more I hope.

You may be right. Unfortunately, I don’t have much options here. To be honest, I have ordered this product:

Privacy info: Clicking on this image will enable content from youtube.com

Good quality, and the two sleeves are tailor-made. I picked a slightly larger size, so it’s not fitting me proper.. Tight enough. After that, I tried to get in tough with the seller, but he doesn’t get back.

Originally Posted by Ectospasm
Extender use has been spotty last several days due to family visiting forcing me to use my ADS gear. But tomorrow will be back to normal so I should be able to get several hours per day in. I’ve got about 157 hours in now. The more I read on Thunders’ makes me realize that diligent work over a one year period is the right outlook to have.

Hey man, do you have a progress log? You give some really good advice and it seems like our PE exercises are similar.


Started: 6.75" BPEL, 8" (20 cm) BPFSL (1/2015) x 5" EG; Current: 7.8" (19.5 cm) BPEL, 8.2" (20.5 cm) BPFSL x 5.3" EG; Gains: 1.05" (2.625 cm) EL, 0.2" (0.5 cm) BPFSL x 0.3" EG

Short-term goal: 8" (20 cm) BPEL, 8.3" (20.75 cm) BPFSL x 5.5" EG; Long-term goal: 9" (22.5 cm) BPEL x 6" EG

Xtended's Progress Report

I think I posted my stats. But no progress log yet although I may do that. However my intervals of measurement are very wide compared to most here. I’ll post an update when I get to 900 hours on the extender. I promised my self, I’m not going to die until I get to 8”. Maybe I’ll achieve immortality.

Has anyone get any tips to stop the vacuum ring from slipping over the corona at higher levels of tension (I’m uncut)?


07/10/14 - 6.5" BPEL - 5.5" MsEG

29/01/15 - 7" BPEL - 5.5" MsEG

Originally Posted by K_F_H
Has anyone get any tips to stop the vacuum ring from slipping over the corona at higher levels of tension (I’m uncut)?

I think the shoulder on the vacuum ring is supposed to be stopped by the edge of the cylinder, or cap, to prevent it being sucked up higher and over the corona. Perhaps the glans is not fitting far enough into the cylinder to allow that shoulder to act as a stop. In that case, maybe the next larger size cylinder would help or maybe the other way around. I wish they offered another intermediate size cylinder. How much tension is there?

The glans fits into the cylinder really well, I think it might just be me, as in my corona is unnaturally soft making it difficult to use it to stop the vacuum ring progressing further upwards. My extender unfortunately doesn’t have markings indicating the tension but I’m stretching at 19cm (3cm over my NBPEL) and I’m compressing the springs so I’d estimate that I’m at over 1,000 grams at least, probably around the 1,200-300 grams mark. That actually poses a really good question that I think I’ll make a thread about!


07/10/14 - 6.5" BPEL - 5.5" MsEG

29/01/15 - 7" BPEL - 5.5" MsEG

Top

All times are GMT. The time now is 04:14 PM.