Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Rob's New Journey

More Info

It does not hurt!


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Originally Posted by ROB the KNOB
It does not hurt!

You definitely have my attention. *chuckles*


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Going to look for the old one, for pictures!


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

OK, I was just about to give up, when I found the coils I had set aside for a new BZ! ;)
RED in Pic 1 is for the insulated, flexible o-ring, which ties the top of the BX together.
BLUE indicates the battery connections, and it’s also where the coils need to be fixed solidly to the battery holder, not flexible.
YELLOW shows where the coils have the enamel coating removed, or sanded off, allowing bare copper to contact the skin. One wire is PLUS (+) or Positive, and the other is MINUS (-) or Negative.

The second pic shows a detail of the hooks that will attach to the flexible o-ring top piece.

MAGNETRON coils 1.jpg.webp
(24.2 KB, 26 views)
MAGNETRON coils 2.jpg.webp
(20.5 KB, 20 views)

RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Here’s a generic battery holder, I recommend AA cells and rechargeable is best. But they last a long time on a charge. A battery tester or VOM (volt-ohm meter) is handy because it is hard to tell if you are just not “feeling it” or the batteries are actually low. The Pic:

2AA battery holder.webp
(22.4 KB, 21 views)

RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Now…obviously, this is where a “smart” guy like myself says “but I have a bunch of 18650 cells!” which…are way higher voltage, cuz they power high brightness LED lights. Are you familiar with the voltage of 2 of the CR123 battery cells? That’s what one rechargeable 18650 is.

And how do you wear this in your underwear without the contraption falling out? I feel like a carry strap is a missing pic here.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

The curve of the coils wraps around, behind the balls, like a cock ring, Fit is very important! It must not be too tight, just maybe “snug”.

I would not use Li-Ion cells, one would be OK for voltage (3.7v nominal) but Lithium is explosive if it contacts water! VERY DANGEROUS!!! I’d use Ni-Cads or NiMH cells, in fact, I have used u to 3 NiMH cells, for a 3.6v nominal rating. Nominal means “rated voltage under load” but there is not much load here. 3 volts (2AA) is fine. In fact, I used that for a long time, except I got tired of changing batteries. So I used rechargeable cells. The NiMH and Ni-Cad are very safe in my experience. I’m quite experienced with electricity, also. You might say I’m a “trained professional”! ;)


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Originally Posted by ROB the KNOB
The curve of the coils wraps around, behind the balls, like a cock ring, Fit is very important! It must not be too tight, just maybe “snug”.

I would not use Li-Ion cells, one would be OK for voltage (3.7v nominal) but Lithium is explosive if it contacts water! VERY DANGEROUS!!! I’d use Ni-Cads or NiMH cells, in fact, I have used u to 3 NiMH cells, for a 3.6v nominal rating. Nominal means “rated voltage under load” but there is not much load here. 3 volts (2AA) is fine. In fact, I used that for a long time, except I got tired of changing batteries. So I used rechargeable cells. The NiMH and Ni-Cad are very safe in my experience. I’m quite experienced with electricity, also. You might say I’m a “trained professional”! ;)

I’ve done plenty of house wire work but not really a D/C guy so that little bit about…explosive Lithium Ion batteries if it contacts water…that’s real relevant. I’d have to pick up some rechargable cells off Amazon. They’d fit in my charger though.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Won’t work in a Li-Ion charger :p

You need a dedicated charger, but many do Ni-Cad and NiMH.
That is Nickel-Cadmium and Nickel Metal Hydride cells. They are cheap, though. Might be able to get a set of batts and charger as a bundle. 4 batteries would be perfect!

Now, for a “use cycle”, I used to really use the heck out of this, and I really believe that 8 hours per day would be Plenty. I would wear it 24/7 until I felt like I really needed to take it off, and it might just be once a week (overnight) I removed it, except for showering. Do Not get it wet! It will allow too much current, but you will feel it. A slight tingle is OK but only if it’s from your own sweat. I have been known to dry the sweat off if it is too much. Most times you will not feel it. Sometimes if my skin is very dry, I will apply a small bit of lotion, just a regular hand or body lotion, nothing fancy. Vaseline works too, sparingly.

TG, you might try your “5 hour rule” which you cited for ADS and such things. Just as a starter. Seems really safe and conservative, you might respond differently than I did. I also took lots of supplements for T-Boost and PE, s maybe it’s why I was able to use the BZ so much, my Testes could “keep up” since I was feeding them with supplements and “stimulation” so much. I noticed that I had good response once I cut back, also. Nice big FAT nuts, and a big fat flaccid were always part of the experience. Flaccid Hang was enhanced as well. This could be a key for flaccid gains, as well as real erect gains, IMO. It’s about the only “Passive PE” technique I am not doing currently, that and ADS. I’m about ready to add them in very soon! :D


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Originally Posted by ROB the KNOB
Won’t work in a Li-Ion charger :p

You need a dedicated charger, but many do Ni-Cad and NiMH.
That is Nickel-Cadmium and Nickel Metal Hydride cells. They are cheap, though. Might be able to get a set of batts and charger as a bundle. 4 batteries would be perfect!

Now, for a "use cycle", I used to really use the heck out of this, and I really believe that 8 hours per day would be [you]Plenty[/you]. I would wear it 24/7 until I felt like I really needed to take it off, and it might just be once a week (overnight) I removed it, except for showering. Do Not get it wet! It will allow too much current, but you will feel it. A slight tingle is OK but only if it’s from your own sweat. I have been known to dry the sweat off if it is too much. Most times you will not feel it. Sometimes if my skin is very dry, I will apply a small bit of lotion, just a regular hand or body lotion, nothing fancy. Vaseline works too, sparingly.

TG, you might try your "5 hour rule" which you cited for ADS and such things. Just as a starter. Seems really safe and conservative, you might respond differently than I did. I also took lots of supplements for T-Boost and PE, s maybe it’s why I was able to use the BZ so much, my Testes could "keep up" since I was feeding them with supplements and "stimulation" so much. I noticed that I had good response once I cut back, also. Nice big FAT nuts, and a big fat flaccid were always part of the experience. Flaccid Hang was enhanced as well. This could be a key for flaccid gains, as well as real erect gains, IMO. It’s about the only "Passive PE" technique I am not doing currently, that and ADS. I’m about ready to add them in very soon! :D

Rob that actually sounds mad! I may consider it when my gains start to level off. What would you consider a suitable time to try this technique?

https://www.ama … /dp/B00WKLPROG/
This is what I found

Originally Posted by ROB the KNOB
Won’t work in a Li-Ion charger :p

You need a dedicated charger, but many do Ni-Cad and NiMH.
That is Nickel-Cadmium and Nickel Metal Hydride cells. They are cheap, though. Might be able to get a set of batts and charger as a bundle. 4 batteries would be perfect!

Now, for a “use cycle”, I used to really use the heck out of this, and I really believe that 8 hours per day would be Plenty. I would wear it 24/7 until I felt like I really needed to take it off, and it might just be once a week (overnight) I removed it, except for showering. Do Not get it wet! It will allow too much current, but you will feel it. A slight tingle is OK but only if it’s from your own sweat. I have been known to dry the sweat off if it is too much. Most times you will not feel it. Sometimes if my skin is very dry, I will apply a small bit of lotion, just a regular hand or body lotion, nothing fancy. Vaseline works too, sparingly.

TG, you might try your “5 hour rule” which you cited for ADS and such things. Just as a starter. Seems really safe and conservative, you might respond differently than I did. I also took lots of supplements for T-Boost and PE, s maybe it’s why I was able to use the BZ so much, my Testes could “keep up” since I was feeding them with supplements and “stimulation” so much. I noticed that I had good response once I cut back, also. Nice big FAT nuts, and a big fat flaccid were always part of the experience. Flaccid Hang was enhanced as well. This could be a key for flaccid gains, as well as real erect gains, IMO. It’s about the only “Passive PE” technique I am not doing currently, that and ADS. I’m about ready to add them in very soon! :D

Good to know. I’ll pick up a charger and some nickel-cadmium batteries. I think those are more common, I’ll definitely check before buying or ordering. Great information and…yeah, I’ll probably take the 5 hour rule on this till I know more about how it affects me. *chuckles* Conservative is how I made my way and I don’t think tossing that is a great way to start something new.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by Fermat182
Rob that actually sounds mad! I may consider it when my gains start to level off. What would you consider a suitable time to try this technique?

https://www.ama … /dp/B00WKLPROG/
This is what I found

Blakoe Ring is expensive, and not as effective I do not believe.
I think I will do a BZ Build in this thread, as the fit and such is very specific to the wearer. Mine were always comfortable, but adjustable. In my talks with TG, I left out the inner ring that makes it adjustable. Large 3.5" or so o-ring, also suitable for a BTB cock ring. Adds stability to the whole deal, which is crucial. I really need to find my old one so I can re-vamp that one. Easier than building a whole new one.


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Blakoe is right at $100 U$D at the moment :p


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Originally Posted by ROB the KNOB
Blakoe is right at $100 you$D at the moment :p

Please do a BZ build! I will not be getting that blakoe anytime soon, it look like there’s less exposure to the skin then the Ball Zapper I find

Yes, a lot less. Plus, the BZ has higher voltage and current, but still reasonable.


RESETTING for a REALISTIC GOAL: New Routine:2Big is turning over a new Leaf!

OFFICIAL re-STARTING STATS: app. 8.5"+ BPEL, 6.00" MEG My pix thread: ..2bigalready's pics

My Screen Name has CHANGED! (formerly ...2BigAlready.) Enter the NEW ME! :D

Top

All times are GMT. The time now is 08:30 PM.