Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

How big is well- endowed....

Originally Posted by thoughtfulgold
God damn it. I failed geometry because I stopped being able to calculate these numbers mentally. It’s *just* outside my ability to quantify the non volume numbers of the equation!

But, as a layperson and guestimating, basically with length as a static value an increase of roughly 2” in circumference from a 4.25~ is in essence doubling in size even if BPEL didn’t change. I was on a mission to figure out my own increases but as I am definitely more cone than cylinder I had given up.

I need to brush up on the proper usage of s scientific calculator…and geometry. Daily slice of Humble Pie: Eaten.

Conical sections aren’t much more difficult. Take your base girth and tip girth and from that get your respective radii, just divide girths by 6.28. The base radius will be R and the below the glans radius will be r. Use this equation to calculate volume:

V = h*Pi/3*(r^2 + Rr + R^2)

I hope it helps.


4/16 BPEL 7.2 MSEG 6.0

1/17 BPEL 7.75 MSEG ~6.2 BEG 6.75

Size anxiety is the mere response to viewing other males as a threat and the corresponding jealousy it causes. Realize that your feelings are a response to a perceived threat and the anxiety will disappear. My log: Big Booty Extravaganza (and Log)

A simple method of getting an accurate measure of erect volume is by simply gauging how much water is displaced in a vacuum chamber. If your penis displaces 10 ounces of water, multiply that by 1.8 to arrive at cubic inches of volume. When I finally got around to this method of calculation I learned I had been deceiving myself greatly with the calculator that is provided on this site. My real volume is 10 cubic inches less than I had thought.

Originally Posted by swaffel
A simple method of getting an accurate measure of erect volume is by simply gauging how much water is displaced in a vacuum chamber. If your penis displaces 10 ounces of water, multiply that by 1.8 to arrive at cubic inches of volume. When I finally got around to this method of calculation I learned I had been deceiving myself greatly with the calculator that is provided on this site. My real volume is 10 cubic inches less than I had thought.

Keep in mind though the calculator assumed a perfectly round penis that doesn’t exist in reality (99% of the time). Meaning although it was off for your, it would also be off the same for 99% of the population, assuming you weren’t using your base girth.


Current: BPEL 7.9"/NBPEL 6.75" MEG 5.2", BPFL 6.5"/NBPFL 5.5" FG 4.4"

---

Realistic Goal: BPEL 8.5"/NBPEL 7.5" EG 5.5" | Optimistic: BPEL 9"/NBPEL 8" MEG 5.75" | Dream: BPEL 10"/NBPEL 9" MEG 6.5"

I think lengthwise, well endowed is when you cant fully insert it anymore!

I cant make a similar statement about girth, since they can accommodate
over time but there is a point between pleasure and pain where pain just
outweighs it since its too girthy (imagine baby pressing out of vagina - its possible!)
I guess this point depends on the woman.
For some 5.5 might be 51% pleasure, 49% pain% - if we see things in black and white that is.
Obviously it is much more complex but otherwise we cant discuss these things - well at least I cant!
Perhaps its not even a point but a range.. I would even say that makes much more sense.
The more you are at the higher end of the range, the more pre-work you need to do for penetration.
Yeah, Ill leave it at that.
So, I guess I would define well endowed girth as follows:
The mid point of the range that is pleasurable for your woman.
If your woman can handle (physically speaking) 0..7” girth, but her pleasure range is 5.2-5.8 then I would say
you would be well endowed for her if you hit (5.2+5.8) / 2 = 5.5
Im very specific here and Im kinda talking out of my ass… I know!


Then: 6.5 BPEL | 5.5 NBPEL x 5.5 MSEG | 5.0 BEG

Now: 8.11 BPEL | 7.24 NBPEL x 5.5 MSEG | 5.0 BEG

Aiming for: 20cm+ BPEL with low EQ (= still usable for sex EQ), 6.0 MSEG & BEG!, so the goal is: 8.1'' | 7.2'' x 6.0! || My journal

Originally Posted by ehlolol
I think lengthwise, well endowed is when you cant fully insert it anymore!

I cant make a similar statement about girth, since they can accommodate
over time but there is a point between pleasure and pain where pain just
outweighs it since its too girthy (imagine baby pressing out of vagina - its possible!)
I guess this point depends on the woman.
For some 5.5 might be 51% pleasure, 49% pain% - if we see things in black and white that is.
Obviously it is much more complex but otherwise we cant discuss these things - well at least I cant!
Perhaps its not even a point but a range.. I would even say that makes much more sense.
The more you are at the higher end of the range, the more pre-work you need to do for penetration.
Yeah, Ill leave it at that.
So, I guess I would define well endowed girth as follows:
The mid point of the range that is pleasurable for your woman.
If your woman can handle (physically speaking) 0..7” girth, but her pleasure range is 5.2-5.8 then I would say
you would be well endowed for her if you hit (5.2+5.8) / 2 = 5.5
Im very specific here and Im kinda talking out of my ass… I know!

To me it seems strange to make ones status as well-endowed or not dependent on the particular woman you’re having sex with..

Apparently 6.5x5.3 begins well endowed, according to Men’s Health.

http://www.menshealth.co.uk/sex/you…user-snake-9250


4/16 BPEL 7.2 MSEG 6.0

1/17 BPEL 7.75 MSEG ~6.2 BEG 6.75

Size anxiety is the mere response to viewing other males as a threat and the corresponding jealousy it causes. Realize that your feelings are a response to a perceived threat and the anxiety will disappear. My log: Big Booty Extravaganza (and Log)

Originally Posted by big-kiwi
In N.Z today was National Penis Day, the Aids Foundation started about 2-3 years ago to make males more aware of their penises.
Anyway, coments on this local radio station from women talking about well-endowed men etc.
What I want to know is, how big do you have to be before you can consider yourself, well-endowed..

Do you think 8x6.5 is classed as well endowed?


Personally I would say anything above 7.5in x 5.75in


September 1, 2016 - BPEL: 7.25in MSEG 4.75in EL: 5.5in FG 3.75in FL 3.5in

June 1, 2017 - BPEL: 8.375n MSEG 5.375in EL: 6.5in FG 5.0in FL 5.125in

PE Goal: BPEL: 8.5in MSEG: 6.5in EL: 8.0in FG 5.5in FL 6in

When you tap her on the head with it and say,

“Who’s your daddy”, and she replies, “Your the daddy”!!! :D


Starting Stats: BPEL 7.0¨ x MEG 5.3¨ (4th Nov 2015)

Current Stats: BPEL 7.7¨ x MEG 5.6¨ (4th April 2017)

The Dream: BPEL 8.1¨ x EG 6.1¨ (Not sure if the wife supports ¨the dream¨)

Originally Posted by ehlolol
I think lengthwise, well endowed is when you cant fully insert it anymore!

My wife tells me that she likes it when I pound her hard and she feels my balls slapping against her. So she might say I was “over” endowed if i could not fully insert it anymore. Or just maybe she would trade that for the extra length, I am far from not being able to not fully insert, so I guess I can’t say!

I can fully insert. I do consider myself well endowed. I don’t think lack of complete insertion is a good barometer.


Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by BigBootyFan
Apparently 6.5x5.3 begins well endowed, according to Men’s Health.

http://www.menshealth.co.uk/sex/you…user-snake-9250

Awesome!

Why argue? LOL


Feb 2016 BPEL ?NBPEL 6", EG 5.25

May 2016 BPEL 6 3/4", NBPEL 6 3/8, EG 5.25

July 2016 BPEL 7" NBEL 6 1/2, EG 5.5

Originally Posted by Titleist
I can fully insert. I do consider myself well endowed. I don’t think lack of complete insertion is a good barometer.

Agreed, you have over three inches on me. There is a position or two that my wife doesn’t like because it hurts her. There’s no way she’d be able to take your size, probably ever. But your wife can take it in full.

Waaaaay to objective a guage.


Feb 2016 BPEL ?NBPEL 6", EG 5.25

May 2016 BPEL 6 3/4", NBPEL 6 3/8, EG 5.25

July 2016 BPEL 7" NBEL 6 1/2, EG 5.5

Originally Posted by EyesOnSize
Agreed, you have over three inches on me. There is a position or two that my wife doesn’t like because it hurts her. There’s no way she’d be able to take your size, probably ever. But your wife can take it in full.

Waaaaay to objective a guage.

I always find it interesting when guys say they bottom out. It’s interesting because it’s not something I’ve experienced.


Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

Originally Posted by Titleist
I always find it interesting when guys say they bottom out. It’s interesting because it’s not something I’ve experienced.

This is encouraging. I suspect my wife can handle way more than I am currently giving her. I hope that I’m right because if so, it means many more happy years of PE’ing for me!

Top

All times are GMT. The time now is 08:24 AM.