Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Hillclimb's First Year Stealth PE Progress

12

Hillclimb's First Year Stealth PE Progress

Hi peen pullers!

I’ve been lurking for almost a year now and have learned so much from so many members here. My stealth PE journey started in January of 2023 with the purchase of a Phallosan Forte. After placing that order I found Thunder’s, and by the time my order arrived, I had been doing manual stretches for a week or more.

I’ve done a lot of reading here at Thunder’s and worked out a routine that has been very good for me. My routine has been adjusted throughout the year and is far from perfect due to privacy and time restrictions. It is based on the research and routines of 5.5 squared, Kyrpa, and many others. Thanks guys!

Unfortunately, I haven’t kept much of a log, but I have updated my stats page periodically with detailed notes on my routine and progress. Posting my results and routine here will help keep me accountable and more consistent in my next phase.

1/6/2023 First 3 months:

Started TRT 1/6/2023

Beginning measurements- 5.5 BPEL +/- .25 length - 4.75 MEG +/- .1. Reasonable accuracy but not 100% (pre thunders research)

Routine: Ramped up for 2 weeks-
-ADS (PF) for 10-13 hours a day @ 6+ days a week.
-Bathmate Hydromax7 pumping 5 days a week for 1 set of 15 minutes working up to max pressure.
-5-10 minutes of jelqs and Ulis after pumping as time allowed. Manuals averaged 3 days a week for the first month and became less consistent in months 2 and especially month 3 (1 x week).

Results: 1/6/2023 - 4/19/2023
6.5 BPEL - 7.125 BPFSL - 5.1 MEG - 6 BEG

Summary:

Max pressure pumping in the Bathmate (14-ish HG based on research not measuring) resulted in significant growth but decreased EQ on pump days. No lasting desensitization or discoloration occurred. A switch was made on 4/1 to a 1.75x9 Leluv cylinder with a brake bleeder pump. The new cylinder is pumped to 5 HG for 1 set of 20-30 minutes as time allows. Girth expansion is down compared to the Bathmate but EQ has returned to above baseline and length in the tube is up significantly. The 1.75 cylinder is a little tight for my base girth but I also purchased a 2.125 that is too large. With length being the primary focus at this time, I will stick with the 1.75 and upgrade to a thick walled Leluv 1.9 if necessary.

Phallosan Forte results were noticeable within the first month but no measurements were taken until mid April. Growth seems fairly steady throughout and started to slow around the time of measuring.

New Routine: 4/17/2023

Started vacuum hanging SD with the PF. Started at 2.5 lbs for 1 hour total including a 15 minute 1 lb warm up. IR heat pad for 30 minutes in the middle with 15 minute cool down. First day resulted in no BPFSL change I increased the weight to 3 lb and then 3.5 lb for next 2 days. 3 month ADS must have conditioned me for hanging. 3.5 resulted in a strain of 1.5% so the weight was upped to 4 lbs on day 4. Strain increased to 3.4% and felt great.

ADS continues. Low pressure pumping continues for blood flow and EQ but will discontinue if a plateau comes early



09-08-2023

Results: 4/20/2023 - 9/8/2023
BPEL 6.875 BPFSL 7.875 MSEG 5.25 BEG 6.125

Hanging consistency suffered in late June, July and early August but April through early June saw dramatic improvement in BPFSL from 7 1/8in to 7 7/8. I worked up to 5.5 lbs on cool down and was showing signs of a needed decon. Bathmate pumping frequency increased during the unplanned decon but pressure was kept to a reasonable level. Occasional pumping in a leluv 1.75 as privacy allowed.

Since starting back in August, I have slowly worked up to 6.5 lbs at cool down with strain around 2-3%. I will continue riding the strain rate until November or until I hit 7.5 lbs then another decon until January. Low pressure water pumping is still going on for EQ.

I suspect that my BPEL may be slightly longer than 6.875 but I’m almost never fully erect unless with a partner. This can be said about my initial measurements too. It’s not an ED issue (I think) because my sexual erections are now excellent. I just don’t get much above 85-90% erect without a woman.

Goal for the next 8 weeks in to gain .375 in BPEL and BPFSL. Girth increase is not the focus.


10/25/2023

Results: 9/9/2023 - 10/25/2023
BPEL: 7 1/8 BPFSL: 8.25 I haven’t checked girth to avoid chasing girth numbers right now

Hanging frequency has been pretty consistent at 3-4 days per week, although I try for 5 on 2 off. I’ve been using an ADS for 8+ hours at 3-4 lbs tension on days that I should be hanging but cannot make the time or find the privacy.

Hanging weight has increased to 6.5 lbs with an FIR heat pad followed by 7.5 lbs for a 10 minute cool down. I’ve been using an ADS for 1- 3 hours (sometimes as much as 8 hours) for a gradual stretch before adding weight and heat.

The results have been terrific with the ADS warm up and the increases in weight from 5.5 lbs to 6 lbs and then to 6.5 lbs under heat. I plan to continue with this weight until the strain slows and then take a 6 week decon break sometime in November.

I’ve been doing sporadic light pumping when I have time and sometimes before sex. I’m consistently hitting 7 1/4 in the tube and as much as 7 1/2.

I haven’t been checking girth recently but the Phallosan Medium cup is now sometimes too small. The large works for a while but will usually start to slip after an hour or so. I sometimes use tape to seal the base of the large condom to prevent slippage. This has to mean I’m gaining girth, at least in the glans.

Awesome work and congrats on your gains!


Rock out with your cock out!

Quote
Results: 9/9/2023 - 10/25/2023
BPEL: 7 1/8 BPFSL: 8.25 I haven’t checked girth to avoid chasing girth numbers right now

congrats on the 7+"


BPEL: 5.5" --> 7.9" ; BPFSL: ~5.6" --> 8.5"

Progress log summary: Hanging with FIRe

"Going hard, fast and heavy is all against the scientific knowledge of tissue expansion or elongation." - Kyrpa

Thanks TD and 5.5Squared.

I’ve decided to take a 4-6 week decon break starting Nov. 1st. Strain rate was dipping below 2% and total strain for the cycle is above 6%.

I’m planning on doing some mild girth work and cock ring edging during the decon. The edging is a sure thing but I will be closely monitoring PIs regarding the girth exercises. I will discontinue if the decon break isn’t showing some kind of change in PIs from my hanging period.

BPEL is approaching 7 1/4 inch but I’m not ready to claim it yet. Hopefully it well inch closer to BPFSL during the decon.

Thanks for your response on my other thread and congrats on your gains!


Last edited by Operationhog : 11-04-2023 at .

Congratz on your gains brother, very inspiring to read.

Think I just might start pumping again with my 2 inch MityVac tube as I fill it up girth wise making it more of a length exercise as I’m too mostly focused on length as of now.

Best of luck on your deacon break, hope those gains are permanent and that you keep them all after the break.

Originally Posted by Slumpy
Congratz on your gains brother, very inspiring to read.

Think I just might start pumping again with my 2 inch MityVac tube as I fill it up girth wise making it more of a length exercise as I’m too mostly focused on length as of now.

Best of luck on your deacon break, hope those gains are permanent and that you keep them all after the break.

Thanks Slumpy. I’m confident that the gains are permanent. Permanent enough to be very close after 4-6 weeks off.

I love pumping in my 1.75 cylinder. I can’t go into it erect, but the length stretch is great and it gives terrific glans expansion. During my decon, I’m using a 2.125 cylinder and restricting length in the tube to focus purely on girth.

I’m 10 days into my first ever intentional decon. So far, I’ve noticed improved EQ and a significantly smaller flaccid. I expected and welcome the boost in EQ but the shrunken flaccid is a bummer.

Although I had taken significantly longer breaks from consistently doing PE, this is the longest I’ve gone without any type of stretching or ADS use. I guess given a week+ of no PE stretching and my usual daily Adderall dose, the flaccid is always going to shrink. Oh well. I can live with being a grower for a few more weeks.

I won’t measure again until the start of my next hanging cycle.

Is there a difference between hanging with 3lbs vs using ADS for 3lbs for the warm up?

There isn’t much difference. I like the ADS because it’s passive. I start at very low tension and increase over the ADS session. It allows me to spend a significant amount of time under low tension and reduce my idle weighted hanging time.

Returning From First Decon

I finally finished my first intentional decon on Dec. 6th. During the 5 week break, I did length restricted pumping at -5 inHg on a 5 on 2 off schedule for 1-2 30 minute sessions. I also did some edging with and without a cock ring. No hanging, ADS, or stretching of any kind was done.

Untrained post-decon measurements:
BPEL: 7.1+ in - no definitive change
BPFSL: 8.1 in - loss of 0.1 - 0.15 in during decon
MSEG: 5.375+ in - very minor gain
BEG: 6.4 in - .25 in gain.

I’m happy with the measurements heading into my next hanging cycle. I believe the increase in base girth is partially due to skin thickening of my turkey neck thanks to increased pumping frequency. At least 50% of the BEG gain is legitimate growth and the remainder is thicker skin.

I did my first hanging session yesterday, December 6th, and another today. Yesterday’s session was conservative to test my conditioning. It felt fine, so I jumped into my regular routine today.

I will be hanging for 1 hour 5 days per week (5 on 2 off). I continue to use an ADS as a passive slow relaxation stretch before beginning the weighted hanging session. The target strain rate will be 2- 3%. The strain rate today was 2.5%. This is an increase of .8% from the last recorded strain rate before the decon, and with a lighter weight!

Thermedic Vs Total Man FIR Heat Pads

I received (finally) my new Total Man heat pad yesterday. I had been using a Thermedic pad for about 5 months and thought it might be time to replace it.

I’ve used the Total Man pad twice now and haven’t felt the same level of heat that I do with the Thermedic. I assumed that because of the thicker fabric housing and slick velcro design, I wouldn’t need to use the foil insulation and velcro straps that I use with the Thermedic pad. Tomorrow I will give it a try with those additions and see how it compares. So far I’m disappointed.

My hanging is otherwise going nicely. I’ve increased the weight this week back to what I was using before the decon.Today’s routine was:
-1.5 hours in the vacuum ADS starting at 1 lbs and ending at 2.5 lbs.
-5 minutes at 3.5 lbs cold
-5 minutes at 4 lbs cold
-Apply and turn on heat pad
-5 minutes at 4.5 lbs warming
-5 minutes at 5 lbs warming
-5 minutes at 5.5 lbs warming
-5 minutes at 6 lbs warming
-20 minutes at 6.5 lbs warm
-10 minutes at 7.5 lbs cold

Pre ADS BPFSL: 8.125
Post hanging BPFSL: 8.375
Strain: 3.1%

I’m back at my routine this week after an inconsistent 2 weeks over the holidays. Between travel and house guests, I had very few opportunities to hang but manged a few pump sessions in the shower.

I am happy to say that the TM heat pad feels hotter than the Thermedic after the addition of foil insulation and velcro straps.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Harusen's Stealth Progress ReportHarusenProgress Reports4405-25-2016 12:23 PM

All times are GMT. The time now is 07:27 PM.