Silicone Sleeves

I was wondering if anyone has any information regarding silicone sleeves. I have an ADS but want something I can wear to maintain the longer state after taking it off. When I use the ADS I gain a couple inches after several hours but that doesn’t last very long and I feel like I need someone between uses to keep that longer length so it heals longer. If anyone has links to products I would appreciate it, also any experience with them.

I too am curious about this! I bought a 9” sleeve off of eBay that I can cut to fit but worried about long term use.

The real stretchy ones are good if you happen to be the right size for them.

I don’t think I would worry unless you have to remove it for a pee.

Sit down to test it :) Should flow well, if not it would indicate to me that it is too tight.

They also make good liners for your oversized pump cylinders and stretched around

The rolled edge create a real good seal.

They can be cut down for a multitude of uses.

They bond together with ordinary clear silicone sealer too.

I wore it for about 30mins and I was able to urinate but it was restricted. My glands were cold as well but didn’t change color. That’s what scared me.

These are not for clamping. Try stretching the sleeve over something oversized like a bottle neck or similar for a few days.

It will stretch it permanently to a more workable size for you, hopefully. It’s a good idea that has material limitations IE.

The wrong sized sleeve

I ordered the cell elongation sleeve from AB Silicone. The website is very slow and takes a long time to send anything so I don’t suggest it. I have an idea on how to use it as an ADS in conjunction with another ADS. I have an ESL40 silicone cup and will wear that on the tip to protect it and roll the full sleeve down over that. I won’t cut it because if it works it can be rolled down as I continue to stretch. I also have a 1 pound magnetic ring that I’ll wear to create a pull as well. The ESL40 cup shouldn’t cause any issues as I’m not creating a pulling force on the tip. It’s mostly to prevent the tip from being sucked into the sleeve. Once the sleeve arrives I’ll test it and if everything works I’ll make a post about it. Logistically there shouldn’t be any problems but removing it and putting it back on to urinate will be a lengthy procedure. I can always buy more of the magnetic ring weights to provide an all day hanging that is comfortable to wear.

Sleeves if not too hard of a shore can be easily put on with lotion.

I won’t know until I get mine but I assume I can just roll it on without lotion.

The sleeve makes my stretcher more comfortable

My sleeve finally arrived. I cut the end off my ESL40 hanger cup because it caused to many issues. I now use it as a one inch silicone sleeve. I’m testing it with my one pound magnetic weight and it seems to hold fine. I need to use a cock ring around the weight to keep the detachable part attached. I think I can attach several of those weights so I can hang the weight for long periods.

I haven’t had any circulation issues while wearing it but I need to remove the weight to urinate. Not an issue but takes longer to put on and take off meaning longer trips. I plan to incorporate the sleeve for pumping and holding onto any lengths gained after stretching. Once I get things figured out I’ll make a post about it.

20A and maybe 30A is the hardness of the silicone needed for tubing and hoses that are sold across various sites for PE. I haven’t been able to find one that fits that bill though in terms of size, diameter, hardness, and in silicone (most are 40A+ hoses or nonsilicone medical tubing). I’m guessing we need something around 1”-innerdiameter, possibly 1.25”-1.5” so long as the silicone is stretchy enough. I’ve seen non-silicone medical tubing that is soft/stretchy for sale but that never comes close to the required diameter, usually much narrower. I wonder where they’re sourcing this tubing/hoses from…

***I think it should be our goal to find a source so we’re not getting hosed on price which is always exorbitant (ie: $10 for *6* inches of tubing…ridiculously overpriced).***

Maybe we could get a group-buying situation going. We all chip in on a 50-foot hose of the stuff and cut it down to custom lengths per member’s request.

Anyone up for sourcing silicone tubing for anti-turtling and vac-extenders? Anyone know where to get this stuff cheap?

I’m sure someone has beat me to this, but I decided to go down the route of making my own sleeves , I made a ‘cast’ in 3d software/3d printer and then I use 2 part skin safe silicone to pour in, leave it to dry and away you go. The benefit I found of this is that I could make thinner/thicker tubes depending on my needs. Also made a cast for a tip sleeve and an adapter so use the phallsosan bell with the jes extender. I think I paid about £40 for the silicone and I’ve made a whole bunch of fairly thick sleeves, as well as other non related objects and I still have a bout a 3rd or the silicone left. I would guess this is the cheapest way to go about it, providing you have a 3d printer or a friend who has one.

Hey Guys,
I suffer from turteling after every Jelqing session. In just about 5 min it goes from a nice hanging to lesser than a playmobil. I think this is holding up my gains.
I tried wrapping with a simple gauze bandage but it cut blood circulation off so didn’t worked.

Should I invest in a Silicon Sleeve ? 2pcs/set Soft Tpr Silicone Sleeve For Penis Pump Vacuum Cup Penis Pump Seals Penis Enlarger Sleeve Penis Extender - Pumps & Enlargers - AliExpress <- here is a link for the cheapest I could find in the web.

Stats
BPEL: 5.6” // 14cm
BPFL: 3.2” // 8cm
Flaccid Girth : 3.4” // 8,5cm