Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Post your penis width.

Originally Posted by 4YearsBigWeen

I have 1.5” width. 4 3/8 girth (started 4 1/4 7 months ago). I have a great sex life with my wife. She loves our sex life. I honestly had no idea 7 months ago my girth was below average, but I’m telling you we have an awesome time together. We are a pair. She doesn’t give a shit how big my dick is she wants the one that is attached to her person. Get yourself a positive attitude and be a honey badger. You are truly just having self pity. You can’t accomplish anything in life with self pity. No offense really. Just work on positive thinking it will change you.

That’s the attitude :up: :up: :)


Starting Stats: BPEL 7.0¨ x MEG 5.3¨ (4th Nov 2015)

Current Stats: BPEL 7.7¨ x MEG 5.6¨ (4th April 2017)

The Dream: BPEL 8.1¨ x EG 6.1¨ (Not sure if the wife supports ¨the dream¨)

Originally Posted by fendool
I know you’re trying to help but just a couple of points:

1. I’m not “just below average”. Based on my research, at 1.4 inch width I think I’m in the bottom 2%.


You’re getting this 2% number from this thread?

You’re like the girl in that commercial who’s dating a french model she met on the internet, in real life he’s ugly and can’t speak French, but she doesn’t see it, because if it’s on the internet it’s true.

This thread is full of people with 5-5.5” girths posting their dicks are 2” wide or better. Bullshit. Try this, I measured a toilet paper roll at around 1.75” width, times 3.14 around 5.5 girth. Take one, now squash it until it’s 2” wide and look at how short it is.

If you really still believe there’s that many guys running around with pancake dicks, or that it even looks good, I don’t know if anything can help you.

I’m 1.5” across the top, and measure at 5.0” diameter to the mark on both.

I figure the dick-pi is 3.33333, rather than 3.14159. I’ll let the reader figure out what the hell I mean by that, but believing this number nullifies a lot of the bragadashery we see on this thread, and some seem to be downright concoctions.

- Saul

Originally Posted by saulgoode45
I’m 1.5” across the top, and measure at 5.0” diameter to the mark on both.

I figure the dick-pi is 3.33333, rather than 3.14159. I’ll let the reader figure out what the hell I mean by that, but believing this number nullifies a lot of the bragadashery we see on this thread, and some seem to be downright concoctions.

- Saul

I know that I measure barely 2” across the middle shaft and just behind the glans at the corona ridge. That is a recent development, to boot. So these guys who measured significantly more just must be bigger than me by a large degree. And require no lube for sex. And have zero condom problems. And all have women who have pelvic bones that shift with ease.

I mean we all can do math, Saul. *chuckles*


Now: 9" BPEL x 6" MSEG as of 12/16/2016 This is my story...and a few progress pics of me here.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My big secret? My methods. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *8* years in and counting. All you have to do is put the work in and keep the faith. Also Fitness helps too.

Today mid shaft I am exactly.
1.77” x 1.50”
Top view x side view respectively.

Measured during calipers.

Originally Posted by hardhalfyard
You’re getting this 2% number from this thread?

You’re like the girl in that commercial who’s dating a french model she met on the internet, in real life he’s ugly and can’t speak French, but she doesn’t see it, because if it’s on the internet it’s true.

This thread is full of people with 5-5.5” girths posting their dicks are 2” wide or better. Bullshit. Try this, I measured a toilet paper roll at around 1.75” width, times 3.14 around 5.5 girth. Take one, now squash it until it’s 2” wide and look at how short it is.

If you really still believe there’s that many guys running around with pancake dicks, or that it even looks good, I don’t know if anything can help you.

I ran an ellipse calculator, major vs minor axis to circumference, to compare proportions. In order to avoid fettuccine noodle status, it seems as if a ratio of 3:4 for height vs. width is the limit. 2” width at 5.5” girth has a height of 1.5”, which is pretty reasonable. Now, 5” girth at 2” width has a height of about 1.1” which would be fettuccine noodle status.

Interesting thread, even the fake measurements as well.


Problem solving with fire.

Thought I should include circumference/girth.

1.81” x 1.53”
Top view x side view

With 5.2” EG.

Again measured with calipers.

2”

1.875” X 1.625 “

Width 1.95”

Girth 5.9”

Guys,
How do you measure your width????
Can anyone tell me I mean we measure our girth using a measuring tailors tape but how do you measure the width using what???????

Do we use a measuring tape too to measure width or what???


Cuurent BPEL 5 .8 EMG 5 EBG 5 GLANS 4.8

FL 3.6 FG 4.1

New Goal 7.5 BPEL NBPEL 7 EMG 6 EBG 6.5 GLANS 5.5 FL 5 FG 5

Originally Posted by brown dick 6.5 x 6.5

Guys,

How do you measure your width????

Can anyone tell me I mean we measure our girth using a measuring tailors tape but how do you measure the width using what???????

Do we use a measuring tape too to measure width or what???

You could use some outside calipers (preferably plastic) to measure the width, which would be more accurate.

Or, like most of us do I guess, lie a rule on the top of your penis, look down from a central position above the ruler, and take your best estimate. :)


Starting Stats: BPEL 7.0¨ x MEG 5.3¨ (4th Nov 2015)

Current Stats: BPEL 7.7¨ x MEG 5.6¨ (4th April 2017)

The Dream: BPEL 8.1¨ x EG 6.1¨ (Not sure if the wife supports ¨the dream¨)

Originally Posted by Skygod2016
You could use some outside calipers (preferably plastic) to measure the width, which would be more accurate.
Or, like most of us do I guess, lie a rule on the top of your penis, look down from a central position above the ruler, and take your best estimate. :)

I used a ruler but I want calipers. I suspect many numbers would shrink if they were the method of choice here. *chuckles*


Now: 9" BPEL x 6" MSEG as of 12/16/2016 This is my story...and a few progress pics of me here.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My big secret? My methods. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *8* years in and counting. All you have to do is put the work in and keep the faith. Also Fitness helps too.

[QUOTE=Skygod2016]
You could use some outside calipers (preferably plastic) to measure the width, which would be more accurate.
Or, like most of us do I guess, lie a rule on the top of your penis, look down from a central position above the ruler, and take your best estimate. :)
[/QUOUTE]
Lie a ruler on top meaning place the ruler vertically on my penis shaft????

Is 4 cm wide how much in inch??

Originally Posted by brown dick 6.5 x 6.5
[QUOTE=Skygod2016]
You could use some outside calipers (preferably plastic) to measure the width, which would be more accurate.
Or, like most of us do I guess, lie a rule on the top of your penis, look down from a central position above the ruler, and take your best estimate. :)
[/QUOUTE]
Lie a ruler on top meaning place the ruler vertically on my penis shaft????

Is 4 cm wide how much in inch??

Just Google “4cm to inches” and Google will convert it for you.


Now: 9" BPEL x 6" MSEG as of 12/16/2016 This is my story...and a few progress pics of me here.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My big secret? My methods. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *8* years in and counting. All you have to do is put the work in and keep the faith. Also Fitness helps too.

Top

All times are GMT. The time now is 09:45 PM.