Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Traction Wrapping vs "All Day" Stretch Following Hanging

Glenn,

We’re using the modified homemade Bib - here’s the link

The Original Bib Hanger

What I’ve done is just enlarge the hole where the “S” hook goes, thread a theraband strip through it, knot the end of it and wrap the other end around a cut-down belt which is attached above or below the knee. I bought the belt from a charity shop so the whole deal cost about $5 - it’s low-tech but it works!

lil1 :littleguy


BPEL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | *20cm* (8")

MTSL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | *25cm* (10") MTSL = Maximum Traction Stretched Length

"Pertinaciously pursuing a penis of preposterously prodigious proportions." What a mouthful!

so sore, I feel such a wimp

Hey guys I have tried to make my own bib its made of clear poly- something and I split it .
I’ve cut the shape as instructed and I have a hook in the front to handle the weights.
To hold it on or lets say tighten it on I have used a hose clamp. My flacid cock is short but I wrap it in a strechy bandage type material and then put the device on.

Now guys dont laugh but I have put a plastic bag on the hook and then I put bottles of water in the bag ,this way I can ajust the weight accurately. Its a bit awkward but it seems to work . I can strech for maybe 15 minutes before I am in pain with only 5lbs of weight. You guys talk of extreme weight and do it for ages.
Am I a woos? the idea of wraping my cock in some elasizised material and having it there all day scares me . Please believe me when I tell you I would do what ever it takes if I knew I was doing it right but something tells me I’m not .

By the way lil1to big1 do you have a shrine I can worship at, you are the inspiration to so many of us,well done don’t stop we are all waiting for the next photos. How do those that wrap stop your cock from getting very cold and sore.
Obviously I am cutting off the circulation but why aren’t you all doing the same.?I wait patiently for an answer. Thanx for being here its so nice to be among friends.

Hey cmenow!

You are neither a wimp nor a woos! The homemade modified Bib is tricky and uncomfortable at times ……. but it’s better than nothing. The big weights you hear about being hung is usually using the BibStarter or BibHanger - these are much more comfortable.

Try cutting down the time of your sets (maybe to 10 mins) or start with a lower weight (2lbs) then work up from there as you feel comfortable. Make sure you restore circulation between sets and if it feels uncomfortable experiment and adjust the hanger. With the homemade modified Bib I only used a cotton fabric wrap. When I first started hanging I too used plastic bags full of anything that was heavy - bags of sugar, bottles of beer, jars of washers and nails, the dog - anything!! :chuckle: But I always weighed them on the scales first to make sure I had the correct weight. Plate weights are much easier and you can pick them up cheaply from K-Mart and probably WalMart. You might even luck it out and find a bargain barbell at a yard sale or charity shop.

As far as the modified Bib ADS is concerned, I wrap with cotton material from coronal ridge down toward the base. The hanger is secured with a doubled strong elastic band or P9 uses automotive “O” rings. The tension on the strap is only moderate, not high - time does the work. I’ve been able to leave this on and maintain good circulation for up to 8 hours however I’d advise first using it at home, checking regularly and massaging every 2 hours before attempting to use it in public. Learn how to use it safely before jumping in at the deep end!

Keep us posted!

lil1 :littleguy


BPEL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | *20cm* (8")

MTSL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | *25cm* (10") MTSL = Maximum Traction Stretched Length

"Pertinaciously pursuing a penis of preposterously prodigious proportions." What a mouthful!

Hey Big1

I’m having a few “slip off” problems with the ADS.

You mentioned in the thread to Size that you’re using a bit of Thera — presumably outside the cotton cloth, and then next to the Bib.

I’m finding that my dick is slipping inside the cloth wrap— and when it comes free, the cloth stays inside the Bib. So one paln might be to abandon the cloth—- not a good feel, Thera against the skin….. not going there if I can avoid it.

I gues that another thing to do is roughen up the internal surface of the Bib so that there is more friction— but that’s not going to help my problem.

Perhaps the greater bulk of a bit of Thera, plus the cloth (plus roughening??) might do the trick. But for ADS, the last thing that we want is to have it all too tight & cut off the blood supply.

Let me know if I’m off the beam in any way…..

BTW— I’m off to Perth for 4 days, (until Sunday evening) so will only be able to read—- unless I log in properly I guess—-

Planning on doing the “proper PE + Business trip thing”—Bib in hold luggage, + 4 X empty 2 Litre milk bottles to use for weights— lets see how we go hanging in the hotel…). + ADS ??— of course…..


Rob, "the person formerly known as P9"

This is a PENIS ENLARGEMENT FORUM, and whether it's tiny, medium or already huge, you are equally welcome to share how you grow it bigger and what this means to you!!!

Hey P9!

Talk about dedicated! - taking empty milk containers with you! Have you considered hanging a six pack? …. and cutting down in weight, a bottle at a time, as you become fatigued! ;) (“Hell, what am I going to do with this spare bottle of ice cold Fosters/VB/Hahn/Cascade…..:gulp: ) Could be interesting!

On the Thera thing - I’ve not had a problem with the cotton wrap slipping off. I’ve always wrapped reasonably tight and always completely flaccid. I’ve also wrapped from the coronal ridge spiraling down by about 0.5cm (.25”) with each turn. The Thera I’ve wrapped about the same tightness. Maybe you could try slightly tighter “O” rings for extra grip or use less tension? More wrap, as you suggested, might also help.

lil1 :littleguy


BPEL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | *20cm* (8")

MTSL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | *25cm* (10") MTSL = Maximum Traction Stretched Length

"Pertinaciously pursuing a penis of preposterously prodigious proportions." What a mouthful!

Lil1:

Man, you guys are creative - you and Tom ought to go into biz together. Y’all can make the damndest (is there such a word) things out of the damndest things.

Sent you a pm yesterday but your box is full. You mentioned you traction wrap no more than 2 minutes after your hanging session. This must mean you don’t do a hot wrap - right? We hear so much about hot wrapping pre- and post PE.

Thots from anybody on its importance

Glenn

traction wrap

although I haven’t followed ALL the threads/posts on traction wrap, I do like the idea, but along the original line of leaving the penis in the extended state for ages after hanging. Not too tight, just enough to mantain the stretch. However, and after I was caught with wrap on a week back, I admit i haven’t even tried it yet. It just seems that overnight I’m going to suddenly have this bulge half way down my leg.

Has anyone tried the Manhood sheaf (for glans protection)? How thick is it? As the wrap would be very conspicuous, what other ides can you come up with?


Ciao

Guiri:

I really like traction wrapping - but just started this week. You’ll need to get more infomation from Lil1.

I wrap with a strip from an athletic sock, allowing the cotton the go slightly over my corona (sort of like being uncircumsized a bit), but leaving enough head sticking out to pee and not wet the sock - UGH. Then I wrap a little further back with Thera.

Man, I only wish for a bulge halfway down my leg. Since I wrap right after hanging, I’m of course flaccid. So for my little guy, all you can see is a bobble in my pants just past the zipper line - but at 2” flaccid, that’s pretty good for me.

Glenn

Re: traction wrap

Quote
Originally posted by Guiri

Has anyone tried the Manhood sheaf (for glans protection)? How thick is it? As the wrap would be very conspicuous, what other ides can you come up with?

Guiri

I have tried Manhoods, liked them and wish them hadn’t fallen off when I wasn’t paying attention. They would be great for guys with fairly tight, thin shaft skin. I have the exact opposite.

Come to think of it, now that I use a padlock, I might get a Manhood to stay on.

Tex3


Tex3

"Sadly, however, seconds after its launch, it undergoes SMEF, or Spontaneous Massive Existence Failure,and disappears." Douglas Adams

manhood staying on

Would the solution be perhaps some kind of adhesive tape wrapped a little tightly around either the base or head, which could then keep it in place? I had this in mind to kill two birds with one stone ….Manhood plus tractwrap.


Ciao

Hey Glenn!

Sorry about the PM thing - I got carried away and wanted to keep everything! I’ve now opted for a new minimalist look …….. completely empty now! :chuckle:

I think time is of the essence with traction wrapping - you have to quickly catch it and wrap it while it’s still in a super-extended state after hanging (1-2 mins) to keep it at the best stretched level. Leave it too long and the ligs start to contract and it won’t stretch as much.

On the question of warm-ups and downs …. there’s been a lot of debate over this. The general consensus is that they are benificial by both aiding growth and helping to minimize the risk of injury. I’m not going to argue with anyone about this - it seems quite feasible, sensible and some attribute gains from this practice. However, I’m lazy and reckless and rarely do either - not recommended! :idiot:

lil1 :littleguy


BPEL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | *20cm* (8")

MTSL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | *25cm* (10") MTSL = Maximum Traction Stretched Length

"Pertinaciously pursuing a penis of preposterously prodigious proportions." What a mouthful!

Re: manhood staying on

Quote
Originally posted by Guiri
Would the solution be perhaps some kind of adhesive tape wrapped a little tightly around either the base or head, which could then keep it in place? I had this in mind to kill two birds with one stone ….Manhood plus tractwrap.

Last night I found my Manhood while looking for something else and it still sort of fits but it’s slipping forward while I’m sitting here writing and not moving around, so adhesive tape will have to be used. Yucck.

A condom would protect your head a little, and traction wrap should work well with it.

Four-day weekend here and I’ve been wanting to try traction wrapping, as I can’t get the padlock closed anymore, so I’ll experiment.

Tex3


Tex3

"Sadly, however, seconds after its launch, it undergoes SMEF, or Spontaneous Massive Existence Failure,and disappears." Douglas Adams

weight vs time

Hey guys.

Which is most effective ADS with light stretch or shorter periods with heavy weights?

thanks

love the sight!!!!!

Hey Maximus!

Difficult to say - the jury is still out on that one. My personal opinion is that heavy/short may be the most benificial but, add a light ADS after hanging into the equation it may help things along even more. By itself ADS seems to help, but using it after hanging helps even more. However …….. using ADS with medium traction may be a whole different thing - you can get some fairly significant fatigue after only an hour or two, enough to need to decrease the tension. These are some of the possibilities we are investigating with this thread.

lil1 :lep:


BPEL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | *20cm* (8")

MTSL (5") | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | *25cm* (10") MTSL = Maximum Traction Stretched Length

"Pertinaciously pursuing a penis of preposterously prodigious proportions." What a mouthful!

WATS A "Manhood Sheaf "??? + Traction Wrap comment

There I go , off into the west with my empty milk bottles—(and I have to say it worked a treat…) and I came back 4 days later , and this thread has taken off in a new direction…..

Lil1, I could have been emptying Margaret River wine bottles. Did a bit of that in MR, but was by myself, so not many. (How many??—-excatly 1/2 bottle. Gave the rest to the restaurant. )

Pardon me boys, …..but what’s a Manhood Sheaf, and where do I see one so I know what youse is talkin’ about??

If I hang in the morning, I shower after, so I’d have to take the traction wrap off to do that….. so I am yet to try traction wrapping straight after hanging.

I have also found that peeing with the traction wrap on is difficult— I have yet to find the compromise best tightness of wrap.

But I mostly do ADS anyway. Maybe I’ll try Traction for those days when I hang at night.

On the subject of the (unsightly????…. never…!!!) “traction wrap bulge”, try just wearing the dick sideways and upwards. It makes the best impression at that angle, much more subtle…..and just as stretched, as you’re only pulling the shaft, not the ligs— in my experience with traction wrap.


Rob, "the person formerly known as P9"

This is a PENIS ENLARGEMENT FORUM, and whether it's tiny, medium or already huge, you are equally welcome to share how you grow it bigger and what this means to you!!!

Top

All times are GMT. The time now is 04:32 PM.