Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Finding xeno: a penis tale

When you use the CCCC, do you always do the alternating clamp method? So far I’ve been clamping them one right next to the other, which results in more strain above all the clamps in the distal shaft. Over the long term though, would this cause a baseball bat girth effect? Are the alternating clamps done to target midshaft and base girth?


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Originally Posted by BeardedDragon
When you use the CCCC, do you always do the alternating clamp method?


No, not always. In fact, I no longer glue the clamps together, like you, I simply clamp them right next to each other. I’ll do a couple sets of both right next to each other clamping; up to 10 total, and clamping with ~0.5” gap between clamps; in order to generate tissue strain ellipses…a deformation mechanics hypothesis that I know you are familiar with.

Originally Posted by BeardedDragon
So far I’ve been clamping them one right next to the other, which results in more strain above all the clamps in the distal shaft. Over the long term though, would this cause a baseball bat girth effect?


I haven’t seen that.

Originally Posted by BeardedDragon
Are the alternating clamps done to target midshaft and base girth?


Yes, but I’ll clamp all the way up to right up against the coronal ridge, but I’ve learned to apply that clamp first, even before the base clamp. The reason for this is that, for me anyway, it’s psychologically very difficult to purposefully cause strong discomfort/mild pain in that area…lots of nerve endings. A work around: sort of like the ‘boil the frog slowly’ notion, if a clamp is applied there first, and then clamping is done progressively up the shaft starting at the base, the coronal ridge adjacent clamp slowly tightens as clamping induced engorgement takes place and causes much less discomfort and more importantly, doesn’t require me to perform that difficult action, it tightens on it’s own. Have definitely seen distal shaft width increase; well, the entire shaft has gotten wider, but there too.

Happy Clamping! :)

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by BeardedDragon
Over the long term though, would this cause a baseball bat girth effect?


Originally Posted by xenolith
I haven’t seen that.


Actually, that’s not exactly right: I did see some baseball bat effect happening…which was. in large part, the motivation for coming up with the Tunica Tenderizer…something to target the lower shaft with…of course the TTr can be used to target any position of the shaft.

Point is, I no longer see a baseball bat effect because of use of the TTr.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

That is good to know. Time to go to Home Depot and buy a saw. I can tell my upper shaft is getting more strain than the lower shaft from CCCC alone. For now I’m OK with it since I have about a 0.2” girth differential. The TTr sounds kind of like a force equalizer for the CCCC. With less clamps, the shaft is at a lower pressure, and the TTr can be used with more force. And with more clamps, the shaft is already at high pressure, and the TTr is used with less force. End result more evenly distributed deformation strain.


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

You are very insightful BD; and correct, one may manipulate fluid pressure within the CCs and CS with ultrafine manual adjustment via the TTr while clamped (single or multiple); one may clamp both above and below the TTr application site as well in order to seriously whip a section of tunica…the distal ends seem to be able to take damn near anything. With respect to targeting the basal tunica, my simple noodle reasoned that I couldn’t target only the lower shaft (tunica) with the Tiger Trap…as it imposes opposite ‘toothed pair’ deflection stress over four ‘toothed pairs’, enough to cover more than just the base of the shaft (tunica), so the obvious solution was a targeted stress application using a single ‘toothed pair; thus the Tunica Tenderizer’. Place the stress on the the part of the tunica that one wants to deform…into a larger one…seems super simple to me.

Pretty much all of the PE methods that one will find anywhere produce stress more or less uniformly over the entire surface of the tunica…that’s kooky.

The TTr lets one focus it.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama


Last edited by xenolith : 03-16-2016 at .

Hi Xeno, I’ve started to experiment with the multi clamping stuff and it looks promising.

Have you any tips for getting a good seal at the base clamp to keep the blood trapped ?

That’s really the only issue I’m having.

Thanks.

Hi cap,

I know what you’re referring to. The reality is that that Cable Clamps become most effective for blood trapping once one’s penis reaches a BSEG of about 6.5”. I used wingnut closure hose clamps for a while before I got to ~6.5” and while it worked very well for the purpose of blood trapping, I experienced numbing that made further use of those a no go. Happily the numbing was temporary, but not something that I wanted to experience again, sooo….thus was born the Nice Vice (NV) and then the Tiger Trap (TT) and then the Tunica Tenderizer (TTr) as means of generating that necessary venous closure while simultaneously generating the deformation that was the original point of the blood trapping.

I recommend building a TT for the purpose of blood trapping and…2 birds, one stone… tunica deformation until reaching about a 6.5” BSEG, which, upon reaching, 2 Cable Clamps will provide the blood trapping requirement to do the tunica deformation work that the CCCC, TT and TTr are designed to exploit.

Hope that’s helpful.

Best,

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

I had the craziest dream last night: a current female democratic presidential candidate, HC, and I were at a party and we got off to the side of the party and HC needed some quarters…I don’t know for what…anyhoo, she sticks her hand in my pocket to dig for change and after juggling the change in my pocket for a bit she starts cupping my balls and then juggling them, which makes Tiger stand at attention, popping his head out above my belt, left of my beltbuckle. She cups my glans with her three forefingers and thumb, kind of in a ‘size frame of reference’ sort of way and looks up at me and says “I knew you had a big cock” and ducks into the nightclub that we’re standing outside off.

Then I woke up.

Popped a woody for HC…crazy.

Crazier still is the fact that I would have a dream where I have a big cock…think about it…that was not true for most of my life, now it is…now even my subconscious mind knows it’s true.

Bitchin’.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama


Last edited by xenolith : 03-18-2016 at .

Did you wonder if she experienced the exact same dream about the mysterious stranger? :)
Let us know if you end up gangbanging Donald Trump.

Out of your three devices which one would you recommend to build up girth specifically in the first 2-3 inches of the shaft?


Last edited by Walter5169 : 03-18-2016 at .

Originally Posted by xenolith
Hi cap,

I know what you’re referring to. The reality is that that Cable Clamps become most effective for blood trapping once one’s penis reaches a BSEG of about 6.5”. I used wingnut closure hose clamps for a while before I got to ~6.5” and while it worked very well for the purpose of blood trapping, I experienced numbing that made further use of those a no go. Happily the numbing was temporary, but not something that I wanted to experience again, sooo….thus was born the Nice Vice (NV) and then the Tiger Trap (TT) and then the Tunica Tenderizer (TTr) as means of generating that necessary venous closure while simultaneously generating the deformation that was the original point of the blood trapping.

I recommend building a TT for the purpose of blood trapping and…2 birds, one stone… tunica deformation until reaching about a 6.5” BSEG, which, upon reaching, 2 Cable Clamps will provide the blood trapping requirement to do the tunica deformation work that the CCCC, TT and TTr are designed to exploit.

Hope that’s helpful.

Best,

xeno

Thanks, my base is over 6.5” so I’ll try using 2 clamps rather than 1.
Still need to build a NV as well.

Originally Posted by Walter5169
Did you wonder if she experienced the exact same dream about the mysterious stranger? :)


Sheepishly…yes. It did seem like we met at a campaign rally…

Originally Posted by Walter5169
Out of your three devices which one would you recommend to build up girth specifically in the first 2-3 inches of the shaft?


If one can achieve venous closure with 1 or 2 Cable Clamps, then both the TT or the TTr will be very helpful for lower shaft girth gains…I think both have their place in a well designed PE strategy, but to specifically target anywhere on the shaft, the TTr is the ticket.

Originally Posted by capernicus1
Thanks, my base is over 6.5” so I’ll try using 2 clamps rather than 1.
Still need to build a NV as well.


Yes, 2 Cable Clamps should do it for you cap. I recommend the Tiger Trap; it’s much more effective at achieving tunica deformation than is the Nice Vice.

Cheers dudes,

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by xenolith
Sheepishly…yes.

If one can achieve venous closure with 1 or 2 Cable Clamps, then both the TT or the TTr will be very helpful for lower shaft girth gains…I think both have their place in a well designed PE strategy, but to specifically target anywhere on the shaft, the TTr is the ticket.

:)

Thanks (I’m far from 6.5 base girth though!).

BPEL = 9.125”.

Good grief, the cock just keeps coming! I could reasonably have entered 9.25”, but I’m conservative with ascribing gains, so that will wait for now.

I think I’m encountering what worked for BIB, but by a different way…he told me that the key to EL gains was to “…loosen the moorings to let your ship out of dock…”: he seemed to understand that there was an abundance of cock buried in the pelvis, and that if one could “loosen the moorings”, that this extra cock could be exposed. But instead of the massive hanging time that got BIB his big EL gains (was it 4” or 4.5” BPEL, I forget), I’m definitely achieving exposure of inner penis…but by a much simpler routine: morning Bucking Bronco Stretches, followed by Sumo Stretch and then wearing 1 to 2 lbs. of Cock Coils through the day. That’s it. Takes about 30 seconds for the BB stretch, 3 seconds for each SS stretch (I’ll do 3-5/day; almost always with a lig pop), so maybe 45 seconds/day on stretches and then ~ 8 hrs./day of light ADS. I’m totally digging this protocol…so simple and so effective…it’s perfect for me.

Regarding soft tissue: I’ve been doing weekend (on both days) soft tissue work for the last 3 weeks: a few TT and/or TTr compressions, some multi-clamp clamping and a pump (with either homemade cylinder w/air or AndroBath w/water and mouth assist modification) and then I’ll wear more like 4-5 lbs. of Cock Coils. I’ll continue with that frequency for the next few months or 7” MSEG, whichever comes first.

And I’ll continue with my daily lig work as long as cock keeps falling out of my pelvis! :cool: :eek:

Zoiks, can I gain 4” of BPEL?

Far out man.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

At this rate you’ll reach 10x7 by New Year’s.

How do you get up to 5 lbs of cock coils?


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Originally Posted by BeardedDragon
At this rate you’ll reach 10x7 by New Year’s.


Yikes. Not sure I want that.

Originally Posted by BeardedDragon
How do you get up to 5 lbs of cock coils?


Five 1/4” diameter CCs, one over another over another over another…you get the idea. I just roll up the 2nd HTW against the distal base of the stack of CCs as a “bumper” for the stack to rest against…and the stack will stay there all day…piece of cake to take a leak too, just unroll the 2nd HTW, slide off the stack of CCs and you’re in business…adds about 5 seconds to the start and stop of a urine break…easy peasey :)

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Top

All times are GMT. The time now is 12:37 AM.