Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Finding xeno: a penis tale

Congratulations!!!

Wow, congratulations on your latest progress, that is extremely impressive!!!

I thought you were planning to be on a rest phase now or did I misunderstand?

Thanks for posting what is working for you, much appreciated. It’s nice to know that further progress can still be possible, even after many years of PE, and after already having achieved stupendous gains too.


7.6 x 5.4 (goal by April 1, 2016)

Hello

I am impressed with your gains. From 6.5 to 9.0 dang very impressed. Very motivating!

Thanks!

Thanks guys; very happy to share such a meaningful report. Yes, it is indeed possible to continue to gain after exhausting “newbie gains”, albeit, only through strategic application of substantially larger stresses than were sufficient to realize “newbie gains”…at least in my experience.

And yes, zarthustra, I was on a break, but I found myself with some time and built a couple of 1/4” diameter Cock Coils…which of course, I had to “try out”…which led to doing Sumo Stretches to “loosen the moorings (to let your ship out of port.” - BIB) to maximize tunica stretch while wearing the CCs…which led to doing Tiger Trap compressions to induce tunica tissue disruption to further maximize tunica stretch while wearing the CCs…sigh. It all started with a little extra time :) .

Just because I know you guys love this stuff: this year’s Valentine’s Day romp included mrs. x’s jaw literally dropping when I pushed Tiger’s head past her inner labia (Tiger’s glans is ~ 6.75” around the coronal ridge) and then her eyes rolled up into her skull when I fed Tiger’s thick, hard shaft of man-meat into her straining pussy. Good Times; will remember that face for the rest of my Life :)

Best,

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Inspirational :)

I’ve been wondering about this for a while, when you use the TT or the TT , clamped at the base , are you rock hard and as expanded as possible before applying the stress? Or still pliable to allow for better expansion ?
Do you use heat ?

Thanks and have fun !

Rock hard Walt; it’s all about deviatoric stress, i.e. stress beyond that which a full raging hard on produces…clamped compressions do that well. To focus on the distal ends of the CCs, I’ve clamped off with ten clamps and then done Tunica Tenderizer compressions on the exposed shaft.,,mmm, mmm, that’ll wake ya’ up! :)

Yes on heat; 150 watt IR lamp.

Thanks!

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Many thanks and the best to you for your next gains.

Don’t gain too quick though you may miss the process of PE.

I have a feeling you like it .. quite a lot. :)

Guess what girth is too big to use a medium cable clamp on?

7.25”.

Going to have to modify some large cable clamps…should be fun :) .

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

If base girth is the problem why not make an Uli thing? You could make it as long (penis length axis ) as you want to create plenty of expansion in the rest of the shaft.


Last edited by Walter5169 : 02-23-2016 at .

For what I do, instant release is of paramount importance…the large Cable Clamp can be made to work just fine.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Some detail about my daily protocol lately:

-every morning I do several “Bucking Bronco” (BB) stretches before exiting the bed in the morning. BB stretches are done while one is lying down by lifting one’s legs so that thighs are vertical and then placing a hardwood pole behind one’s thighs; then placing one’s HTW wrapped penis behind the pole and then grasping penis above the pole with one or both hands. Now press one’s legs down, forcing the pole and the dorsal shaft of the pole-retained penis away from the pelvis…you’ll get the BB name once you do one ;) . If I haven’t done a Sumo Stretch (SS) in 10 hours or so, I get a strong lig pop. The point of the BB stretch is to strain the suspensory fascia and ligaments. When done correctly, one should feel soreness in the pubis mons area later in the day after doing the BB stretching.

-every morning I do a SS; I then repeat as opportunity allows, usually 2-3 times in addition to the morning SS. Even if I got a strong lig pop with my morning BB stretching, I sometimes still get a lig pop with my morning SS. If not, I always get at least one lig pop later in the day.

-every day I wear Cock Coils (CC); I usually use just 2 for about 2 lbs. I think that most penises could use just one for about 1 lb.

That’s it.

So the macro R phase this time around is only for soft tissue; not fascia and ligs.

It’s clear to me that this protocol was essential in generating my recent 0.375” EL gain…easiest, fastest EL gains I’ve had since newbie days, including all of my hanging campaigns, and by quite a margin…felt like cock was falling out of my pelvis!

I think that anyone that incorporates this into their EL gains campaign SHOULD see at least 0.25” EL gain over 3 months…and more over less time is certainly possible.

Cheers!

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Very cool info on manual lig work.

How long had it been since you did targeted lig work before your recent 0.375” gain? My thinking is that lig gains are relatively easy compared to gains in the proximal tunica to which the ligs are attached. So lig work only has to be done once a year or so to keep up with the amount of proximal tunica gain over the entire year. But I’m curious as to whether your recent gains fit with that.


Before 5.5" x 4.1" volume 7.3 ci ////// Now 7.4" x 4.9" volume 14.1 ci

Originally Posted by BeardedDragon
Very cool info on manual lig work.

How long had it been since you did targeted lig work before your recent 0.375” gain? My thinking is that lig gains are relatively easy compared to gains in the proximal tunica to which the ligs are attached. So lig work only has to be done once a year or so to keep up with the amount of proximal tunica gain over the entire year. But I’m curious as to whether your recent gains fit with that.


Interesting hypothesis BD. Have to say, it had been a good while since doing lig targeted work…over a year at least, so that jives with your hypothesis.

While I’d like to not de-bunk your hypothesis, I’d sure like to see some more EL gain while technically on a break…I mean how more cock can keep falling out of my pelvis? :)

I look forward to finding out.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

I Like your style Xenolith, I also intend to see how much I can grow, I don’t intend on stopping, after all I have a mate who will be stretching on the inside as I grow, so it’s not like I have to worry about becoming too big for someone.

That being said, yours sounds very yummy in size already, I will be watching like a Voyeur towards your progress. *Winks*

With 4 clamps, saw 9.25” BPEL this morning.

Never experienced length gains like I am now with my lazy PE method…:)

10” BPEL has crossed my mind…

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.375" BPEL x 6.75" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Got my sights set on making a Tunica Tenderizer. I was going to start with CCCC, and then 6 months later try a NV, and then 6 months later finally a TT. But hey why not go for the best first. Well I got a few questions as I set out to make one of these magic gizmos.

What size and shape triangles would be best? I was thinking use the same 2x4 to make them right angle triangles, but wasn’t sure about the size. Based on your descriptions, it seems like very little height would be necessary to do serious damage on a fully clamped and engorged tunica. I was thinking 1 inch base = 0.707” height.

Are the double-tooth side triangles’ bases adjacent? And the single-toothed side’s triangle point aligned perfectly with the V point of the adjacent double-toothed side?

Did you sand down and round out the edges at least a little bit? I will cringe if you say no.

Do you use a similar (to the NV or Tiger Trap) 4 corner bolt plus wingnut set up to tighten it? And if so, how much extra space do I need on the double-toothed side for these bolts? Concerned about it being bulky and running in to the clamps.

Diving in the clamping deep end,
BD


Before 5.5" x 4.1" volume 7.3 ci ////// Now 7.4" x 4.9" volume 14.1 ci

Top

All times are GMT. The time now is 03:58 PM.