Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Finding xeno: a penis tale

Originally Posted by JackovDiamond
Hello xeno,

Thank you for the Well measurements and the pic. Both were indeed helpful.

The filing I had done matched your Well by fractions of a mm give or take.

Still waiting on that Gorilla glue, so won’t make any extra alterations until I’ve got the stretch band stuck firm and can give it a test run.
Once its on my dick and I get a feel of it I should be able to determine what fine-tuning is required.
I’m already thinking I’ll bend the top closure bolt a tad and file the teeth a further mm or two.

Thanks again for your assistance, and I will be sure to report back my experiences, good or bad.

JoD


Wonderful to learn of your success with the modification Jack; thank you for letting us know. Yes, I forgot to mention the modification to the top closure bolt; I wallowed out the well that the nut nests into on the left side as the BIB is oriented while hanging. You could certainly accomplish the same objective of making closure easier by bending the bolt slightly.

I look forward to learning of your experience with it.

Happy to be of service.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by xenolith
Luka’s Dog Pissing Stretch: I think I just invented a new, extreme stretch. I call it the LDP Stretch

Basically one foot up on a table and stretching away from that foot; makes a great position for jelqing too. Still use both of these and hot tub jelqs in each gains campaign; it’s just the heavy duty I-phase stuff that changes.

Good Luck Ecto!

xeno

Thanks, xeno. So you were just stretching by hand? Stretch and hold?

Originally Posted by Ectospasm
Thanks, xeno. So you were just stretching by hand? Stretch and hold?


Yes, with a HTW on Tiger though; for a better grip.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

edit

Tell us what you were going to say luca.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Nothing, I misread your post and understood you stretched your penis wearing the TT haha 😀

In the meantime I think I’m making some slight progress in EG, still studying your threads, expect questions soon 😀

what can you tell us (if you havent anwered this already here) about taking decon breaks?. It seems you incorporated different new tecniques but never taken decon breaks and you did and did very few rest days a week.

Originally Posted by quim92
what can you tell us (if you havent anwered this already here) about taking decon breaks?. It seems you incorporated different new tecniques but never taken decon breaks and you did and did very few rest days a week.


Oh my garsh quim, since finding (length, was what I was after at the time) gains drying up even with hanging weights of over 100lbs. for greater than 20 hours a week I realized that tissue de-conditioning was the name of the game for post-newbie gains. I’ve been employing strategy outlined here ever since:

xenolith - Finding xeno: a penis tale

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

I’ll read that thanks, dammmn 100lb?? how did you hang that much? by the way. i am wondering what Bib did and think about this.

Originally Posted by quim92
how did you hang that much?


The shear strengths of the bolts and leash are much greater than 100 lbs.

I’ve hung much more than that for short periods; in both (PE and SKF hanging) cases, it’s all tissue and mind conditioning; mostly the latter.

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Xeno,

I feel really stupid, but if my bottom front nut is all the way out, how can it possibly make the formation of /\ ? I’ve removed the back bolt completely and need to get a zip tie for it, but I am still at a loss for how your configuration works.

Looking at your pics, it seems it actually looks more like \ / when clamped down. Am I wrong?


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Originally Posted by xenolith
I realized that tissue de-conditioning was the name of the game for post-newbie gains.

Ding!

Or at least, it occurred to me gains always came after a period of inactivity. usually I gain about .6 in length over a given duration. No matter the consistency in my routine, no matter the amount of heat or type of PE; no gains after that initial burst. So now I’m opting for whatever preferred method of PE, be as consistent and diligent as I can be till the gains stop, taper down over a period of one month and after that deconditioning.

And as you would have it; BPFSL has shot up in the last 3 weeks.

Originally Posted by Mr. Schlong
Xeno,

I feel really stupid, but if my bottom front nut is all the way out, how can it possibly make the formation of /\ ? I’ve removed the back bolt completely and need to get a zip tie for it, but I am still at a loss for how your configuration works.

Looking at your pics, it seems it actually looks more like \ / when clamped down. Am I wrong?


Probably just an artifact of not having a coordinate system to refer to Schlongy; no worries. Let’s see if I can correct this by offering a coordinate system to correspond to directions in these “/\ and \/ diagrams”.

This: /\ : is what my BIB looks like if viewed in the X-Y plane, in other words, ‘up’ (i.e. the top, pointy end of the /\) is ‘up’ (i.e. on top of my dick) and ‘down’ is ‘down’ (opposite of content of previous parentheses); and this: \/ : is what my BIB looks like if viewed in the X-Z plane (looking down at it while attached to penis), in other words, ‘up’ (i.e. the top, open end of the \/) is ‘away from the body’ and ‘down’ (the bottom, pointy end of the \/) is closest to the body.

Please let me know whether this helped or not; I’m persistent, if need be, I’ll draw a picture and attach it to a post.

Cheers,

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Originally Posted by xenolith
Probably just an artifact of not having a coordinate system to refer to Schlongy; no worries. Let’s see if I can correct this by offering a coordinate system to correspond to directions in these “/\ and \/ diagrams”.

This: /\ : is what my BIB looks like if viewed in the X-Y plane, in other words, ‘up’ (i.e. the top, pointy end of the /\) is ‘up’ (i.e. on top of my dick) and ‘down’ is ‘down’ (opposite of content of previous parentheses); and this: \/ : is what my BIB looks like if viewed in the X-Z plane (looking down at it while attached to penis), in other words, ‘up’ (i.e. the top, open end of the \/) is ‘away from the body’ and ‘down’ (the bottom, pointy end of the \/) is closest to the body.

Please let me know whether this helped or not; I’m persistent, if need be, I’ll draw a picture and attach it to a post.

Cheers,

xeno


Perfect! I didn’t think I was that dense. It appears that I will still require some wrap in order to keep the hanger on. I am not as girthy as you and it slipped right off.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Originally Posted by Mr. Schlong
Perfect! I didn’t think I was that dense. It appears that I will still require some wrap in order to keep the hanger on. I am not as girthy as you and it slipped right off.


Yeay!

Regarding wrap, if the top teeth are cut down as indicated in this discussion with Jack: Finding xeno: a penis tale (p. 22), one should be able to compress the top of their modified BIB sufficiently irrespective of girth. In other words, ALL of the compression will be a wedge on top of the penis, roughly between 11:00 o’clock and 1:00 o’clock (where top dorsal is 12:00 o’clock). Literally, any size (girth) penis can be sufficiently compressed on only the top wedge of tissue if the teeth modification is done…by the way, realize that making the teeth modification in no way precludes one from using the hanger in exactly the “normal” way, it just makes it possible to use it in a batter way as well.

To be clear, this modified geometry of the BIB is incomplete without cutting down the top (and a little bit of the bottom) teeth…it just won’t work as it’s supposed to without making ALL of the modifications. I think if you read the discussion with JackOvDiamonds on the page that I linked to, you’ll find very good detailed information about the teeth modification.

You’re almost there!

xeno


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Top

All times are GMT. The time now is 11:13 AM.