Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Vitallus plus

1234

Vitallus plus

I e-mailed them and my impression is that for an extra forty euros insured and twenty euros uninsured, they will ship to the USA…

For those whom might be interested email the website, prepare for broken English reply… they do eventually reply, which is cool

Does anybody recognize the outer tubing used on this??


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

Just looks like hard plastic tubing to me. I use the tube I got with my brake bleeder gauge, as long as your tubing is relatively thickwalled (and doesn’t collapse in vacuum) I’d argue it doesn’t really matter what you use.

Okay, I gotta admit the product looks really interesting. And entering your measurements seems like it’s a surefire way to get close to right on the first tube they send you. And after you wear the first one and it’s wrong, assuming you or they messed up the numbers, you should be able to get a decent second shot that should fit.

My questions are…skin dryness? Toughness? Numbness? Blood flow and dead red blood cells trapped in the penis?

Those are only answered with the acid test of just doing it overnight. As the product is not designed with short-term use in mind, at all. I’m highly curious but…it’s not a cheap leap at around $280USD to get one here after said and done. I like the gentle force aspect but I got totally gypped when I hopped on the Phallonsan Forte so I’m skittish here.

I hope someone tries this soon and gives some real review time to how it works and feels after a night’s use.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by EdgeWalker

Just looks like hard plastic tubing to me. I use the tube I got with my brake bleeder gauge, as long as your tubing is relatively thick-walled (and doesn’t collapse in vacuum) I’d argue it doesn’t really matter what you use.

I am under the assumption that the intention was a very low vacuum to be used over a very long time. If that being the case, the tubing would not need to be hard to prevent collapsing. I think it would more likely be a softer more pliable tubing to allow a fully swollen flaccid penis to be able to flop around freely in pants during the day and allow rolling around in bed while sleeping at night.

This is what they claim on their web site, anyway

I am guessing a silicone plastic blend?


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

Originally Posted by thoughtfulgold
Okay, I gotta admit the product looks really interesting. And entering your measurements seems like it’s a surefire way to get close to right on the first tube they send you. And after you wear the first one and it’s wrong, assuming you or they messed up the numbers, you should be able to get a decent second shot that should fit.

My questions are…skin dryness? Toughness? Numbness? Blood flow and dead red blood cells trapped in the penis?

Those are only answered with the acid test of just doing it overnight. As the product is not designed with short-term use in mind, at all. I’m highly curious but…it’s not a cheap leap at around $280USD to get one here after said and done. I like the gentle force aspect but I got totally gypped when I hopped on the Phallonsan Forte so I’m skittish here.

I hope someone tries this soon and gives some real review time to how it works and feels after a night’s use.

I would not let a bad experience with the product you tried deter you from something completely different. One thing is not the same as another. I know the price is high, that is why I would like to find the exact tubing they use then combine it with a good fitting condom at low vacuum to try the theory out.
If it worked, I would consider investing in one.
I don’t know if numbness blood flow would be nearly as much of an issue with such a low vacuum than as a conventional penis pump. I would like to be the judge of that for myself, then go from there.
Has anyone here used one of these?


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

Originally Posted by 7inchesSoft
I am under the assumption that the intention was a very low vacuum to be used over a very long time. If that being the case, the tubing would not need to be hard to prevent collapsing. I think it would more likely be a softer more pliable tubing to allow a fully swollen flaccid penis to be able to flop around freely in pants during the day and allow rolling around in bed while sleeping at night.
This is what they claim on their web site, anyway
I am guessing a silicone plastic blend?

Ah like that. In that case you are probably right, my girlfriend bough a noogleberry (breast pump) and it also has soft tubing, so most likely it’s similar. Either way, wouldn’t be too much of an issue to swap tubes around if you want to use it at higher vacuum I suppose.

Originally Posted by EdgeWalker

Ah like that. In that case you are probably right, my girlfriend bough a noogleberry (breast pump) and it also has soft tubing, so most likely it’s similar. Either way, wouldn’t be too much of an issue to swap tubes around if you want to use it at higher vacuum I suppose.

I don’t mean the hose. I was looking for the cylinder material. It is made of flex- pipe (tube)


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

It looks like this:

Link:


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

I wouldn’t know what that is made of, sorry. I do think that due to the structural nature strong vacuum won’t be an option (as you mentioned).

I am interested in the review from the first guy here who invests in it though! :)

Recently I’ve been back to the products website and now they do ship worldwide it seems for less than my original post via DHL…

It does seem this device is nothing much more than a small aquarium pump,100mbar is 3in hg, alight timer and a flexible cylinder with a thick latex condom.

So if anything I think the only part that’s really of value would be the cylinder

Originally Posted by sweeternuts
Recently I’ve been back to the products website and now they do ship worldwide it seems for less than my original post via DHL…

It does seem this device is nothing much more than a small aquarium pump,100mbar is 3in hg, alight timer and a flexible cylinder with a thick latex condom.

So if anything I think the only part that’s really of value would be the cylinder

Exactly.
Once you get the flexible cylinder, the rest you can do yourself. The vacuum regulator valve would have to be hunted down too or you could order it. To order just the cylinder may not be possible.. I notice their size calculator does not work.


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

The size calculator worked for me this morning on an android device.

I belive the regulator is just an in line screw valve to allow for balance of vaccum with movement.

I think I might order one an buy a aquarium pump.
Just to try it out

I bought a bathemate and that was a complete piece of shit all the people who love them are sponsored content basically human spambots
IMHO that’s my opinion

Originally Posted by sweeternuts
The size calculator worked for me this morning on an android device.

I belive the regulator is just an in line screw valve to allow for balance of vaccum with movement.

I think I might order one an buy a aquarium pump.
Just to try it out

I bought a bathemate and that was a complete piece of shit all the people who love them are sponsored content basically human spambots
IMHO that’s my opinion

From the size calculator, were you able to find out what sizes they offer. I would guess they are only going to be available in standard flex-tube diameters and perhaps they cut them to various custom lengths?

How would you regulate the vacuum on an aquarium pump?

I can’t afford a hydro max x50 at $350 (free delivery) ,so I haven’t been able to try it. It’s too expensive.


My current dimensions: flaccid: 8" x 6.5" erect: 9.5" x 7.125" glans: soft length:1.825" soft diameter 1.65" firm length:2.286" firm diameter:1.90"

Goal: flaccid: 9" x 7" (.1" length .5" girth) erect: 10" x 8" ( .5" length 1" girth) glans: soft length: 2.25" soft diameter: 2" firm length: 2.5" firm diameter: 2.25"

Ultimate goal: flaccid: 10" x 8" erect: 11.5" x 9.75" glans: soft length: 2.5" soft diameter: 2.25" firm length: 4" firm diameter: 3" In other words: A big, fat elephant cock!

Top
1234

All times are GMT. The time now is 07:04 AM.