Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Silicon Sleeve Pumping

I don’t use an applicator for the sleeve.

Detail into my statement.. Its not rolling it up but more folding it over onto it’s self .less layers, less stress on the material, so less force required to stretch it over the glans, less chance of it ripping, and less chance of a finger sliding out an it snapping down around my most sensitive bits

The idea of an installation tool sounds cool, just cause new tools are that way

sweeternuts

I do not believe rolling a sleeve on an applicator should lead to damage UNLESS the applicator has a sharp edge which can cause a cut in the sleeve which inevitably leads to a serious tear. That;s why it is important to round the edges.

>Detail into my statement.. Its not rolling it up but more folding it over onto it’s self .less layers, less stress on the material, so less force required to stretch it over the glans, less chance of it ripping, and less chance of a finger sliding out an it snapping down around my most sensitive bits

That.s sort of how I remove the sleeve Have not tried yet to use the applicator to get it off. I once removed an Xsleeve by rolling it up and over the glans. Gave me temporary nerve damage which meant I could not ejaculate for about a month. Never again.

Regards
Austfred

sweeternuts

I do not believe rolling a sleeve on an applicator should lead to damage UNLESS the applicator has a sharp edge which can cause a cut in the sleeve which inevititably leads to a serious tear. That;s why it is important to round the edges.

>Detail into my statement.. Its not rolling it up but more folding it over onto it’s self .less layers, less stress on the material, so less force required to stretch it over the glans, less chance of it ripping, and less chance of a finger sliding out an it snapping down around my most sensitive bits

That.s sort of how I remove the sleeve Have not tried yet to use the applicator to get it off. I once removed an Xsleeve by rolling it up and over the glans. Gave me temporary nerve damage which meant I could not ejaculate for about a month. Never again.

Regards
Austfred

What I am describing is a way to apply without an applicator, if there are less layers of material to stretch it becomes easier to open up and one would not be putting as much stretch into the sleeve close to an end where rips invariably start

In addition the sleeve will grab onto the glans protection and make it Impossible to place it correctly.. So I give respect and merit to using an applicator.. A little lube on the glans protection makes it pretty simple to place, also allows for a slip joint as the member expands

Also if you don’t trim and file fingernails short and rounded they dig in and cause micro tears throughout the length of the sleeve whether or not an applicator is used

Thoughts questions concerns?

sweeternuts]

> In addition the sleeve will grab onto the glans protection and make it Impossible to place it correctly.. So I give respect and merit to using an applicator.. A little lube on the glans protection makes it pretty simple to place, also allows for a slip joint as the member expands

I find it best to fit the glans protector first That way using the applicator tube you can place the front edge of the sleeve over the top pf the edge of the protector

>Also if you don’t trim and file fingernails short and rounded they dig in and cause micro tears throughout the length of the sleeve whether or not an applicator is used

I agree fingernails are probably the main reasons for tears.

Regards
Austfred

I have been doing a pretty steady routine thanks to the here, I’ve learned here, I hope I’ve provided some knowledge as well ..

I am loving this the addition of the silipos to my previous sporadic use of the sleeve is a winner in my opinion, now it’s the only way I pump was none a fan of donut or ill feeling skin sensitivity.

If treated right the sleeves will last a good while.. Like everything including any who read this they have a lifespan it’s a matter of how you take care of them, the sleeves are a wear item like tires on a car.

Being able to be consistent with pumping I’ve grown up in cylinder size and that for me is a win

If there is a desire from people who read this thread and not comment.. I will try a sleeve with a steady pressure, been thinking of static pumping for a while to change my routine , if there is interest here about it using a sleeve I will post , I’m not gonna be a chearleader for sleeves

How Long Did It Take To Get The Ab Silicone Sleeve

I ordered two about a month ago and I still haven’t received them. I sent them an email but no reply. And they didn’t put a number on their site to call or contact them. Anyone else have this trouble?

Originally Posted by Kornstar
I ordered two about a month ago and I still haven’t received them. I sent them an email but no reply. And they didn’t put a number on their site to call or contact them. Anyone else have this trouble?

Kornstar
Took me a while though mine were shipped to Australia.
Austfred

I had been packing my Mr Fantastic 2 1/8” water pumping sleeve for some time. I have since tried pumping with both a partial sleeve and no sleeve at all other than the glans protector. I decided to try to get some extra girth as my wife does not have any problem taking my 5 1/2” MSEG.

I started my using old cut down sleeves and just covering the front part of my penis. I found I was still packing the cylinder from behind the groove and was no longer getting any excessive fluid retention. I then removed the sleeve all together and just used the glans protector. Still no fluid retention other than a tad at the front of my foreskin which was still exposed near the back of the glans protector. However it soon got back to normal.

My conclusion is that you are unlikely to get edemas or donuts provided you are packing the cylinder. Also when you tear part of one of the soft silicone sleeves the remainder is still useful as a sleeve provided you cut the torn part off so the tear wont continue. If you are not packing the cylinder two half sleeves one bend the other will probably work as well as one full sleeve.

Make sure you use the glans protector with baby power underneath though to prevent blisters.

I measued myself post pump today after sellting down and getting properly erect and found I measured at 6” MSEG. This does not last long but am hoping to get beyond my steady 5.5” MSEG.

Austfred


Last edited by austfred : 09-10-2015 at . Reason: typo

After my first ab silicone got ripped, I ordered my second silicone sleeve on eBay. It’s less expensive and free shipping. And it arrived in 3 days. That is if you’re in the US.

This is the one I bought:
Ebay item number: 181872947609

What I like about this silicone sleeve is it allows me to use my 2.25” cylinder without getting the donut, since I always pump at 8-10 hg. I am kind of in between, just packed my 2” cylinder; so the 2” cylinder is too small/tight where as the 2.25” is too big. I wish they have something like a 2.125” which is 2 1/8”. That will be perfect for me at this stage.

I agree with ausfred that when you’re almost packing a cylinder, you don’t need to wear the silicone anymore. You only use it when the inside diameter of the cylinder is too big for you.

patrickj]
>After my first ab silicone got ripped, I ordered my second silicone sleeve on eBay. It’s less expensive and free shipping. And it arrived in 3 days. That is if you’re in the US.

>This is the one I bought: Ebay item number: 181872947609

That is a good find. I note they ship internationally for free. Think I will buy one as a spare.

>What I like about this silicone sleeve is it allows me to use my 2.25” cylinder without getting the donut, since I always pump at 8-10 hg. I am kind of in between, just packed my 2” cylinder; so the 2” cylinder is too small/tight where as the 2.25” is too big. I wish they have something like a 2.125” which is 2 1/8”. That will be perfect for me at this stage.

I got my54 mm (2.125” cylinder) from My Fantastic. http://www.themrfantasticpenisenlar…E_CYLINDER.html

Not cheap bit it is a special one with two connectors to work with his electric water pump.

>I agree with ausfred that when you’re almost packing a cylinder, you don’t need to wear the silicone anymore. You only use it when the inside diameter of the cylinder is too big for you.

Still working fine but as I am uncut I do get fluid retention in part of my foreskin. Quickly dissipates but I am thinking of going back to using a short sleeve just to extend past the glans protector and cover my foreskin.

Were you able to salvage art of your torn sleeve by cutting off the torn part?

Regards
Fred
[/QUOTE]

Fred,
Thanks for the tip. I have not thrown away the torn sleeve yet; it’s still underneath my bed along with my full collection of new and used cylinders. Since I am also uncut just like you, I may cut the sleeves down to multiple 1” sleeves and use it to cover just the skin portion right below the corona.

Ever since I started using this silicone sleeve for pumping, I no longer have to avoid sexual intercourse with the wife; there is no edema and I feel the shaft is heavy and thick.

In the past, after an intense pumping session, my penis looked depressing, looking really fragile, full of fluid, feeling like a sick and overweight penis. I would massage and edge for hours to bring down the edema. Then I tried to sleep and avoided sex from the wife because although it looked big but it was very fragile and flimsy; it’s really not ready to penetrate anything.

Now when pumping with this silicone sleeve, I feel like Hercules after a good work out, ready to do some damages.

Fred,
This is what I did with the new silicone sleeve that I bought on eBay recently. Since I am about 7.25” BPEL, I cut the sleeve down to 5 inches. I keep the other 1 inch portion for future use, such as using it just to cover the skin right below the glans.

With some visual aid(porn), I quickly achieved a full erection. I rolled the 5 inch silicone sleeve, covering my full shaft only, meaning I still have my glans visible.

I lubed up and entered the cylinder keeping the vacuum level between 5-6hg.

After the first 20mins, I exited the cylinder and did some massage and edging to get some good blood circulation going.

My second and final session lasted about 40 mins at similar vacuum level. Although I must say at times I spiked the vacuum level to 8-9hg for just a few seconds and brought it back to 5-6hg. Before exiting the cylinder, I measured the inside vacuum length, with giggles and such happiness inside me, when the ruler mark showed just a bit passing the 7.5” mark.

My penis felt big and heavy but I didn’t notice any extra fluid like in the past when pumping without this silicone sleeve.

I jumped in the shower, with a feeling that I cannot describe; it’s like there are lights at the end of the tunnel. For me attaining length gain is almost impossible. Now I believe there is a way. Because if I can gain length inside the cylinder, eventually it will become real gains.

I will report back here in a few weeks with more progress.

I also pump bathmate with the sleeve from ABsilicone. I like this a lot, no fluid retention like others have stated. Seems that it focuses on length more than girth. I usually keep it on for some time afterwards. In order to slip it on, I usually soap it up a bit in the bath, and it slides on easy. Then I let some water flow through it to get the soap out. Its really easy but difficult to describe. Important to get the soap out though.You just need a chub for it to work, as it will easily slide on and off while soapy.

Top

All times are GMT. The time now is 08:13 AM.