Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Sex after Pumping

12

Sex after Pumping

I got inspired by UF gator and Aceveto 8 and recently started pumping.

I bought a pump-worx digital pump, the chamber is 8inches and the diameter is 3”. I am keeping low pressure between 2 and 3. But now I realize the importance of correct diameter sizing, I should have gone with a 2” but the store didn’t have any 2” diameter pumps with gauge. After reading the forums, I am going to invest in a vacu-tech. I do have some questions.

Is it okay to have sex after pumping?

Is it better to go in erect, semi-erect or flaccid?

Is it necessary to lube, if you are not packing the cylinder?

I have heard that applying vitamin E to your unit after pumping is beneficial, any truth to that?

Thanks In advance.

Originally Posted by Lund_Master
I got inspired by UF gator and Aceveto 8 and recently started pumping.

I bought a pump-worx digital pump, the chamber is 8inches and the diameter is 3”. I am keeping low pressure between 2 and 3. But now I realize the importance of correct diameter sizing, I should have gone with a 2” but the store didn’t have any 2” diameter pumps with gauge. After reading the forums, I am going to invest in a vacu-tech. I do have some questions.

Is it okay to have sex after pumping?

Is it better to go in erect, semi-erect or flaccid?

Is it necessary to lube, if you are not packing the cylinder?

I have heard that applying vitamin E to your unit after pumping is beneficial, any truth to that?

Thanks In advance.

Yes it is OK to have sex after pumping, in fact, I would say it is the optimum time as you at your largest size that should be and turn on and more pleasurable for both you and her.

I much prefer entering the cylinder erect, or at least semi-erect. If you are not going to use lube, then erect is the way to go to ensure the deepest penetration into the cylinder.

I use a cylinder that is 1/4” larger then the one I can pack, so I don’t have to use lube. This also helps with the issue of having your balls drawn into the tube by the vacuum.

I don’t know about the benefits of using vitamin E on your cock. If you have dry skin issues, probably any hand lotion would help with that, otherwise, I don’t use anything. If anything I use a medicated powder after my session to keep my crotch dry. But don’t put on the medicated powder until after sex! :)


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.


Last edited by gprent : 12-13-2011 at .

I use vitamin E oil on my penis when I get bruising from extending and pumping. It seems to speed up the healing process. However, it doesn’t prevent anything.

I have a relatively high bend to my erection, so if I don’t use lube, my shaft and glans tend to stick to the sides of the cylinder as the vacuum increases and draws in my cock which causes some pain.

Can you pump your entire package using that tube?

Thanks gprent and dtwareen 1942 for the feedback. I was reading up on some stuff and specially about lymphatic liquid that is pumped in your dick while pumping, now when you ejaculate don’t you lose some of this liquid also and isn’t this liquid important for your immune health and other bodily functions. This might not make sense, but it’s just conjecture based on my reading. What do you guys think, please educate me!

Tugger Joe, what I am doing right now is keeping the pressure around 2 max 3 hg. Because as gp pointed out it’s a battle to keep your nuts from not getting sucked in. My EG is a little over 5 inches probably around 5 1/8 th, so according to vacu-tech a correct size tube diameter for me is 2 inches but with 3in diameter cylinder that I have, as soon as I increase the pressure the nuts start to get sucked in, so what I do is grab the sack and try to hold them back but with lube and all that (although I wipe my hands dry) but still my hands are slick enough that I can feel my balls leaving my grip and getting sucked in, it’s like I am hanging by the cliff and slowly my fingers are slipping, so to speak. Anyways that what prompted me to ask the lube question.

So, to answer your question yes I do pump my entire package with it but it ain’t easy. So, tonight I am going to take gp’s advice, go fully erect and no lube.

Next week I am planning to order a vacu-tech 2” x 9” cylinder pump it’s about $170, but I think it’s worth it. The pumpworx cylinder has a rubber gasket with a hole in the middle for you to enter the chamber, I guess it’s there to prevent the ball suction, but any pressure over 3 and you are asking for trouble. I do have to press the cylinder hard against my pubic bone but that’s not much help at higher pressure.

When last question I have, might not be the correct place for it, this is with regards to measurement. I have a slight curve to the left and when I measure my cock from the right side it measure about 7 inches but from the left side it measures 6 inches. Which is correct?

I think you are spending a lot of money and you still might not be getting what you need.

First of all, that vacutech pump is made of plastic and the handles are prone to breaking. Second, you should be buying a 1.75” cylinder and you don’t need any rubber rings to keep your balls out once you buy the correct size.

I would recommend you go to penisdepot and buy the metal pump with a 9”X1.75” rimmed straight wall cylinder for $125 and that price includes shipping.

During the check out process, when you get near the end type in that you want a 9”X1.75” cylinder in the Enter Any Instructions block.

Here is the web page: http://www.penisdepot.com/metalvacII.html

Now, if your pump-worx pump has a quick disconnect between the pump and cylinder, all you have to do is buy a 9”x1.75” rimmed straight wall cylinder for $65.

The correct cylinder sizing info you should use is the sizing info on our site: Selecting Your Cylinder Size


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Gprent thanks for the advice. I didn’t know abou penisdepot. When I went to purchase my pump I saw a Dr. Kaplan pump with 1 and 3/4 in dia. But then I remembered reading in UF gator blod hat he started with 1 and 3/4 cylinder and it’s getting too cramped for him and his starting EG was less than mine, so I figured that I should go with 2in.

So just to be 100% sure before I place my order you are saying that I should go with 1 and 3/4 in dia. Cylinder.

The pumpworx is built a little different, it has digital gauge which is kind of integrated with the cylinder so I am not sure how a third party cylinder would fit. Anyways I don’t want to make the same mistake twice, I checked out penisdepot metal pump system and it looks good and is a little less than vacu-tech.

Tugger Joe, I didn’t understand your question the first time around, so no I am not pumping my full package and I don’t think I want to do that anyways.

Originally Posted by Lund_Master
Gprent thanks for the advice. I didn’t know abou penisdepot. When I went to purchase my pump I saw a Dr. Kaplan pump with 1 and 3/4 in dia. But then I remembered reading in UF gator blod hat he started with 1 and 3/4 cylinder and it’s getting too cramped for him and his starting EG was less than mine, so I figured that I should go with 2in.

So just to be 100% sure before I place my order you are saying that I should go with 1 and 3/4 in dia. Cylinder.

If you are still interested in pumping without lube, then I think you can make the 2” cylinder work. For best results when you use that tube, you should enter it erect after you stretch your balls out a little and then bone press the tube to your crotch as you begin to pump up. That should ensure full cock immersion into the pump while keeping your balls out.

Like I mentioned before, my “perfect” size tube is a 2” that I have to use lube with, but the tube I always use is my 2.25” with no lube.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Originally Posted by gprent
If you are still interested in pumping without lube, then I think you can make the 2” cylinder work. For best results when you use that tube, you should enter it erect after you stretch your balls out a little and then bone press the tube to your crotch as you begin to pump up. That should ensure full cock immersion into the pump while keeping your balls out.

Like I mentioned before, my “perfect” size tube is a 2” that I have to use lube with, but the tube I always use is my 2.25” with no lube.

Wow - no lube? Doesn’t your glans get irritated?

Originally Posted by monstermandingo
Wow - no lube? Doesn’t your glans get irritated?

Why should it, it is not touching anything. Remember, I am using a tube that is 1/4” larger then I can pack, so nothing but the base is up against the sides of the tube.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Lund Master I just use a red clamp on about 2 or 3 clicks around my nuts and you can use any pressure you like and your nuts will never get sucked in. But I strongly recommend using a lube though.

Yes I still use a broccoli band, but most often I put it on right after I exit the tube and then edge for a while. It certainly maintains my after pump size the entire time.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Lund_master if you want to try out a 2” cylinder first before spending much money, make one at home out of schedule 80 2” pvc pipe. The inside diameter is just shy of 2” and you can cut it to whatever length you want. The only drawback for you would be that you can’t see through the tube to see what your dick looks like.

Thanks for the input, as I am learning pumping, I am realizing that because of the shape of my unit, bends left, I will have to use a lube, because of the bend, even in a 3 in tube it touches the cylinder walls. I think I will use Leah’s idea for sizing. The problem with pumpworx is that it’s 3in cylinder and it has a gasket on the base with a hole y have to lube to get in and as you start increasing pressure the nuts start ti get pulled in, on friday I experienced my nuts getting sucked in for the first time and pulling them back out of the small entry hole was not comfortable. But I am liking this pumping thing so I am going to try the pump recommended by gprent.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Pumping prior to sex: need fast advicedanglemanPenis Pumps1704-15-2006 03:58 PM

All times are GMT. The time now is 09:10 PM.