Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

pumping and base girth

12

pumping and base girth

Hi guys

My question is simple and short. My base girth needs some work and I wonder if any of you guys had some good base girth gains from pumping. Thanks for your answers.

Matt

pumping gave me great base girth

Matt,

I can answer your question with a definite YES as far as pumping being very effective for base girth, speaking from personal experience. Briefly, I have been an avid pumper/dryjelqer/powerjelqer for the past three years. My pre-PE base girth was slightly under 5”. Today, my unpumped erect base girth is over 7” in circumference and can reach nearly 8” after pumping. My flaccid base girth is over 6”. Now it may be my individual genetics, good technique, persistence, plain good fortune or a combination of all of the above which has given me these great results. But I will definitely attribute my success in base girth growth to pumping. Also, pumping directly helped my first 1” growth in erect length. I’m still pumping at least 5 days/week and am still growing. Plus responsible pumping works great for keeping my dick in tip top overall health.

Peforeal

Peforeal, did you ever hang?

peforeal, I am wondering how your girth increase at the base stands in relation to your overall girth development (since you’ve started PE)? Have you had relatively more growth at the base than in the middle or is there no difference?

I’m asking this because I am afraid that the current shape of my penis (it’s slightly thicker at the middle) will result in a baseball bat with a routine that’s based on jelqing. I’m seriously considering to add pumping to my current routine, which solely consists of stretching, before starting any serious jelqing.

Originally Posted by Philadelph
Peforeal, did you ever hang?

Philadelph,

I’m not a hanger. I’m not against it, but I just didn’t have the time to commit to the required amount of hanging hours for good results.

Peforeal

Originally Posted by Yoshi
peforeal, I am wondering how your girth increase at the base stands in relation to your overall girth development (since you’ve started PE)? Have you had relatively more growth at the base than in the middle or is there no difference?

Yoshi,

I have had much more substantial girth increase at the base, with a gradual decline in increase the further up the shaft toward the glans. Thus, my dick is more tree-trunk in shape,which I like. Since the greatest part of my girth is at the base, my shape has not hampered my ability to still receive decent blow jobs around the midshaft to the glans area. If you’re concerned about the baseball bat effect, I suggest that if you decide to pump that you wrap the area from your midshaft to below the glans first and then do your pumping. ACE self-adhesive bandage or any facsimile will do. This will concentrate the pump in your base area and help to prevent the baseball bat effect that you’re concerned about.

Peforeal

Thanks peforeal, that sounds like excellent advice!

Because of fear for a baseball bat (I prefer cylinder or tree trunk) I had become somewhat reluctant to PE, and decided to take a break. This time I will take a more intellectual/scientific approach, and I’m trying to absorb as much knowledge about PE as possible. The more I read about pumping the more enthusiastic I become! I might join the pumpers couch one day.

BTW Nearly 8 inches in circumference after pumping!? Dude, do you have oats for breakfast :P? Must be a great feeling sure…

Yoshi,

It is a great feeling,and one which still surprises me on a daily basis. When I first started this PE process, I only hoped that some of what I read and learned would turn out to be true. My gains have surpassed my wildest expectations, and I’m not done yet. In fact, I may never stop PE’ing.

Peforeal

P.S. - I reach the 8” in circumference at the base when I pump with my 2.5” diameter cylinder after about an hour with regular breaks.

peforeal: What kind of pump do you own since you seem to have quite the experience?

Originally Posted by Philadelph
peforeal: What kind of pump do you own since you seem to have quite the experience?

During my first 1.5 years of pumping I used a Mity-Vac pump/gauge, two of them to be exact. Both of them developed cracks in the trigger and were eventually discarded. Since then (the next 1.5 years), I don’t use any pump at all. All I employ are any of my two principal cylinders ( 2.0” and 2.5” diameters purchased from LA Pump Distributors), the attached hose and connectors and my own mouth power to create the suction and vacuum. Since I’m quite familiar with the “feel” for vacuum pressure from experience, I can gauge the pressure exerted to a comfortable and effective personal level. I do not suggest that newbies try to pump without the benefit of a pump/gauge to monitor themselves. Better safe than sorry. That’s about it.

Peforeal

Peforeal,

March 1st I will be pumping very regularly for 3 months now. I’m currently up to 50 min p/d 3 on - 1 off routine. I noticed you use the Powerjelk in your other post and If I’m not mistaken you have a testimonial/post on the PowerJelk website. Anyway, I made myself a homebrewed powerjelk about a year ago using black closed cell foam around small (1” dia x3” wide) wooden spindles. These spindles have a cove or concave about 1.5” - 2” wide and the foam rides nicely in the concave and keeps the jelker centered nicely around my unit as I jelk.

I have been using it extensively with pumping and the results have been awesome! I now pack my 1 3/4” by 10” LA tube almost all the way up to the gland after a 50 min session. I’ve thought about buying the real thing (the Powerjelk) because my homebrew job is getting a little small since my member is now getting larger in girth. Just wondering if you still like and use the powerjelk? I have wondered though about the “flat” rollers and If I could get use to it after using mine with concave rollers.

Also, I’m going for more length and not necessarily after girth. But I am wondering this. Would you recommend getting a 2” tube at this time or maybe later on. It might be beneficial to work between both tubes using the 2” to keep adding more girth and hopefully some length, and using my 1 3/4” as the smaller tube to mainly work the length as I could pack it easily and thus increase length…If that makes sense??

ineed9

Having a good base girth is essential to packing the tube at the base and creating a good seal there.

I agree with the above suggestions about using two tubes with different diameters to coax some girth and/or length out of your unit. The problem I seem to be having now is that my base girth is becoming too big to fit in the Penimaster ring (especially if I am slightly pumped from either a workout or sexual excitement) and the pressure there begins to hurt like a bitch, i.e., they should make the PM in different ring sizes too.


If you knew you could not fail...what would you attempt to do? Female Foot Fetish Current Stats: 5/4/10 8.5BPx6.0, 7.5NBP Achieved Goal and have been on maintenance program since

2006.

Originally Posted by ineed9
Peforeal,

March 1st I will be pumping very regularly for 3 months now. I’m currently up to 50 min p/d 3 on - 1 off routine. I noticed you use the Powerjelk in your other post and If I’m not mistaken you have a testimonial/post on the PowerJelk website. Anyway, I made myself a homebrewed powerjelk about a year ago using black closed cell foam around small (1” dia x3” wide) wooden spindles. These spindles have a cove or concave about 1.5” - 2” wide and the foam rides nicely in the concave and keeps the jelker centered nicely around my unit as I jelk.

I have been using it extensively with pumping and the results have been awesome! I now pack my 1 3/4” by 10” LA tube almost all the way up to the gland after a 50 min session. I’ve thought about buying the real thing (the Powerjelk) because my homebrew job is getting a little small since my member is now getting larger in girth. Just wondering if you still like and use the powerjelk? I have wondered though about the “flat” rollers and If I could get use to it after using mine with concave rollers.

Also, I’m going for more length and not necessarily after girth. But I am wondering this. Would you recommend getting a 2” tube at this time or maybe later on. It might be beneficial to work between both tubes using the 2” to keep adding more girth and hopefully some length, and using my 1 3/4” as the smaller tube to mainly work the length as I could pack it easily and thus increase length…If that makes sense??

ineed9

ineed9,

Yes, I am still a regular powerjelq user as well as an avid dryjelqer along with pumping. I like the variety. Let me also say that my “testimonial” on the powerjelq website was actually taken from a powerjelq use post that I had made on the PEFORUM site. I was actually surprised to see that I was being used on the powerjelq site as a testimonial, since no one asked me if it was okay to use my comments and signature. But I guess that’s the way of the internet world. The comments I made though are mine, and I stand by my experiences.

Your own powerjelq creation seems to be working well for you. Why don’t you just redesign yourself another larger one to accommodate your increase in size?

Since you are pretty much packing the cylinder completely up the shaft, I would definitely recommend that you move up to a 2” diameter size cylinder. Your thoughts on having the two sizes, one more for length and one more for girth expansion, are right on the money. That’s the kind of pumping technique I’ve always employed. Presently, I alternate between my 2” and 2.5” cylinders for length and girth results respectively.

Good luck and congratulations on the gains you’ve made. Here’s to more.

Peforeal

Yoshi,

I don’t quite understand why people are so afraid of baseball.
I would take any girth gain, and if it would mean having a “baseball- bat”, so be it.
Yes please!!
Look at Roberto of Bangbros. Would’t mind having that bat..


January 2009: BPEL: 8.6" EG: 5.7"

Goal for 2009: BPEL: 8.75" EG: 6"

Ultimate goal: BPEL: 9" EG: 6.5"

ahund,

Personally I love the way my penis looks right now, IE I love my natural shape. If I can retain these natural proportions, which I believe is possible (it just requires a more careful approacher I think) then I would be more than happy with even the slightest of gains.

Makes it more challenging to me.

btw Nice signature!

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Condom pumpingpenismithPenis Pumps53106-30-2017 10:50 PM
Cable cuffs-A must have for girth!!!tenaciousDPenis Enlargement2612-13-2016 11:04 AM
Ways to increase girth size at the basemike2002Penis Enlargement1501-15-2012 04:46 PM
Equating pumping and hanging?triggerPenis Enlargement705-11-2005 07:18 AM
Sharing a girth variationchakaconcarnePenis Enlargement506-08-2003 11:10 PM

All times are GMT. The time now is 08:42 AM.