Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Lap pump = harbor freight tools pump

its in between 41/4- 41/2 inches at the base. My thinking is that I would want to leave enough room for growth so I wouldnt be one of the guys that says shit, I need a bigger tube. But I also wouldnt want to get to big of one and hinder my results. I might just get a tube from a place like that so I dont have to go and buy 25 ft of tubing, a gravel cleaner and a quick disconnect. Even though I will probably end up buying that stuff anyway.

gprent, can you help me with a list of parts and possibly pics. Im totally new to this and I would like to get a complete understanding of what im getting myself into. If you cant get the pics, thats cool. Thanks for you help.

also, I was looking at the same exact pump at the picturebrite.com. it cost 34 dollars. Now I can buy the pump at harbor freight for 20 bucks, by 25 feet of 5/16 OD clear tubing for 13.50 (thats already 33.50) then go to petsmart and buy the 1.75 inch gravel cleaner for 13.00 and then I will need the quick disconnect which will cost about 7. So lets add that up…

Pump:20
clear tubing: 13.50 (25 feet)
1.75 tubing: 13.00
Quick disconnect:7

= 53.50 for everything. not including shipping. lets add 10 bucks for gas (which is generous)

=63.50
and then the headache of putting everything together.

Then at picturebrite

Pump: 34 (gauge and tubing and disconnect)
cylinder: 27.50

=61.95 +6.87 shipping

=68.82

This is my explaination. Tell me what you think. Hopefully by tomorrow because that is when Im going. Thanks.

Originally Posted by wannabebig87
its in between 41/4- 41/2 inches at the base. My thinking is that I would want to leave enough room for growth so I wouldnt be one of the guys that says shit, I need a bigger tube. But I also wouldnt want to get to big of one and hinder my results. I might just get a tube from a place like that so I dont have to go and buy 25 ft of tubing, a gravel cleaner and a quick disconnect. Even though I will probably end up buying that stuff anyway.

gprent, can you help me with a list of parts and possibly pics. Im totally new to this and I would like to get a complete understanding of what im getting myself into. If you cant get the pics, thats cool. Thanks for you help.

I have never put one together from parts. To me the choice is obvious, buy from picturebrite and buy the 1.75” tube and the P131 pump with gauge. Open the box and you are ready to pump.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

you are sounding like a picturebrite rep more and more. :-P

I will probably do that.

I mean it would be cool to say I built my own, but if you break everything down, you are not saving a whole lot.

do you think the 2inch tube would work for me? Just be careful not to get my balls sucked in it.. That picture brite has a discount if you buy the whole kit and not seperately. saves a few bucks.

Originally Posted by wannabebig87
do you think the 2inch tube would work for me? Just be careful not to get my balls sucked in it.. That picture brite has a discount if you buy the whole kit and not seperately. saves a few bucks.

For your girth, the 1.75” tube will be much more comfortable and that will make your pump sessions just that much better. The 1.75” tube will take you all the way up to 5.5” girth and that ain’t bad.

By the way, I always used to recommend lapdist, but for much lower prices you get the exact same pump and a good quality cylinder from picturebrite.

One more thing, don’t get sloppy on using the Forum Guidelines .

One more thing after that. I think you forgot on building your own, you have to cap that tube, drill the cap and tap it for your female connector that will accept the male connector you have to buy.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.


Last edited by gprent : 05-08-2009 at .

Alright, thats cool. Sorry about the punctuation. I was in a little bit of a hurry today, had to get to the doctors. Anyway, thanks for the infomation. I’ll be getting the pump and tube from picturebrite.com. Its worth a few extra dollars and not having the headache. Later.

I just bought the brake bleeding pump from Harbor Freight. I didn’t purchase it with the intention of using it for PE, but for actually bleeding my brakes. After bleeding my brakes, would it be a bad idea to save my pump and use it for PE? Perhaps it would require some serious cleaning, but I would rather be safe than sorry.

I don’t have a cylinder yet, but I was planning on buying one in a couple weeks.

MyNameIsSam, just make sure it is well cleaned. If there are any traces of brake fluid, I understand that weakens many plastics, which would not be good for the cylinder.


For Lampwick, becoming hung like a donkey was the result of a total commitment.

I don’t think I would want any kind of fluid of that nature around my dick, but that is my own preference

Originally Posted by wannabebig87
Also, I was looking at the same exact pump at the picturebrite.com. It cost 34 dollars. Now I can buy the pump at harbor freight for 20 bucks, by 25 feet of 5/16 OD clear tubing for 13.50 (thats already 33.50) then go to petsmart and buy the 1.75 inch gravel cleaner for 13.00 and then I will need the quick disconnect which will cost about 7. So lets add that up..

Pump:20
Clear tubing: 13.50 (25 feet)
1.75 tubing: 13.00
Quick disconnect:7

= 53.50 for everything. Not including shipping. Lets add 10 bucks for gas (which is generous)

=63.50
And then the headache of putting everything together.

Then at picturebrite

Pump: 34 (gauge and tubing and disconnect)
Cylinder: 27.50

=61.95 +6.87 shipping

=68.82

This is my explaination. Tell me what you think. Hopefully by tomorrow because that is when I’m going. Thanks.

I have a pumpw/gauge and a 2” tapered and 2” straight cylinder for sale in a thread in the main members forum. $65 for everything with a free clamp and golf weights to boot if you may be interested.


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 7" NBPEL x 5.6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

Actually, dropped it to $55 no shipping cost.


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 7" NBPEL x 5.6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

I presume this product is only available in the States?

I bought three Jim Diamond tubes from a seller on ebay for like $27 (shipping and all) each. Egaybay, I think is the seller name.


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 7" NBPEL x 5.6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

Hi, any advice how to buy the Harbor Freight in Europe (Italy)?

Thanks!

Top

All times are GMT. The time now is 01:06 AM.