Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Contemplating cylinder upgrade

12

Contemplating cylinder upgrade

I’m very close to maxing out my current Vacutech round thickwall cylinder which measures 2x9 inches. The BEG of my penis now measures 6.50” and the MSEG is 6.25” with my NBPEL hitting 8.10. For me to go any further, I pretty much have to get a larger cylinder. My base girth in particular is definitely maxed out, because I can feel how tight it is during expansion. I think that if I stuck with my current cylinder, I could probably squeeze out another quarter of an inch for my MSEG and length, but I’m not certain about that. Does anyone know what’s the maximum girth that can be attained in a 2 inch diameter cylinder?

If I did upgrade though, I would get a 2.25x10 round thickwall. The problem though is that I have already hit my initial goal of 8x6.5. This was supposed to be my cut off, and I would then go back to my normal life sans P.E. But now I can’t help but wonder how far I could take it? I seem to have a strong knack for PE given the speed at which I have gained, and I’m confident I could conceivably take my penis from “huge” to “monster” category ala Titleist. But that would require at least 2 to 4 more months of dedication.

I have had sex with one chick with my enhanced size so far, and the biggest difference I noticed from my end was that sex felt much better for me due to the increased friction and sensitivity from the additional girth. I had to stop thrusting a few times to stop myself from orgasming too early. As for the chick, she came after only 3 minutes or so in missionary, but that’s not unusual as my penis curves upward and women respond very well to it in front facing positions. One thing though which had never happened before, I made her orgasm from doggy style. In the past, I’ve had women orgasm easily from missionary or from girl on top, but NEVER from doggy style. An upward curved penis isn’t really an advantage for doggy, or so I’ve come to believe based on my past experience. Usually women would tell me it felt good, but they never could orgasm in that position. But now it’s changed! :D I don’t know if it’s due to the size increase though, or because I decided to do more shallow thrusts than usual. When I fucked her doggy style, I was pulling back no more than an inch or two to keep constant pressure in her pussy. In the past, I would pull back a lot further, but I read somewhere that doing so reduces the stimulation for the woman.

Also, I had no problems with her being in pain or discomfort, as I gave her oral before putting it in her pussy. And I never bottomed her out, though we never tried the legs on shoulders position which from my experience gives the deepest penetration (makes a mental note to do that the next time I fuck her). Still, it took a good 2 minutes or so of rubbing my penis head against her vaginal lips to get them to relax and accept my dick and once we started fucking, she was producing copious amounts of vaginal fluid. So basically, I haven’t experienced any drawbacks from my experience so far with my larger penis size, and only advantages.

So give me your .02 cents and talk me into, or out of getting a bigger cylinder! :D


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

Whether you buy it or not is up to you, but if you do buy, the 2.25”X10” is the one to get. That will let you comfortably expand to 7” or more girth and of course a lot more length.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Man, I was hoping you were going to tell me something like “shut up and go home!” :D


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

The easy method is geometry. Circumference of a circle with 2” diameter is 6.28” and so that is the circumference available to expand into inside the cylinder. Slightly more if the cylinder is not exactly in spec.

At 2.25” this changes to 7.07” circumference maximum in the cylinder. More working space. You decide your path forward. Getting up to around that size is all a matter of preference.


Now: 9.13" BPEL x 6.375" MSEG as of 5/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

@ thoughtful, but it must be possible to grow beyond the confines of the cylinder because my BEG is 6.50”, and obviously post pumping expansion is well beyond that, probably an inch or so greater though that is temporary.

I’m wondering if I can get up to 6.50” on my midshaft with my 2x9” cylinder. I could probably do it, though it would take a lot longer perhaps than if I got a 2.25x10” cylinder.


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

Originally Posted by Draculas_son
@ thoughtful, but it must be possible to grow beyond the confines of the cylinder because my BEG is 6.50”, and obviously post pumping expansion is well beyond that, probably an inch or so greater though that is temporary.

I’m wondering if I can get up to 6.50” on my midshaft with my 2x9” cylinder. I could probably do it, though it would take a lot longer perhaps than if I got a 2.25x10” cylinder.

You do grow slightly above the confines but it isn’t by much. And it isn’t by design. Of course you notice you have to slide the cylinder off of your penis. That doesn’t mean you’re taking the most efficient route to expansion for more girth. It generally is a length pumping concept to use a packed tube. Or if you are pumping for forming purposes to even out girth or correct a curve.

The ceiling for girth in a packed tube is close by. There literally isn’t much more that tube *can* give you.

Additionally, base girth increases fastest because the central flow of blood is there and it will always get cramped first (unless you have a pronounced small base girth compared to the rest of the penis).

So, if you’re trying to be effective, take the proper tube size. You are hitting the limits of what that one will give you.


Now: 9.13" BPEL x 6.375" MSEG as of 5/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

Thoughtfulgold, your handle suits you very well I must say. You always give clear and excellent advice man. I think I’m going to go ahead and purchase the 2.25x10 cylinder from Vacutech. I already felt the negative effects of my first cylinder which was tapered and was literally stifling my glans. I don’t want to repeat that again!


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

OK I ordered it. $129.95 plus $9.35 for priority mail. Pricey but I know it’s worth it! :D


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

Let us know how much you like it when you start using it.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Absolutely, will do.


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

Well the new cylinder came in the mail today. I’m going to use it later tonight, and post my feedback! :D


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

OK so I just finished my first session with the new cylinder using my usual 3 set routine lasting 10 minutes each, starting at 7Hg, 12Hg and finally at 15Hg for the last set with the last two minutes at 17Hg. Here are my thoughts:

Positives:

1) Greater overall expansion. This is really axiomatic, a bigger cylinder equals more expansion. In my previous cylinder, the base would get so tight that I would literally have to rip it off of me after a session so I had clearly outgrown it. With the new one, that no longer happens, plus I’m seeing a more even expansion along the entire shaft of my penis and my glans is no longer touching the sides of the cylinder, except on the top.

2) Less lymphatic fluid. This one surprised me actually. I figured that with greater expansion from the bigger cylinder, I would get more lymphatic fluid accumulation, but it turned out to be the opposite. I’m thinking that the greater expansion allows for more blood flow throughout the entire penis, which reduces the amount of lymph fluid. That’s not to say that I ever really had any excessive amount of lymph fluid, as it’s always been minimal. Also, in my smaller cylinders, the lymph build up would also be solely under my glans area where the corona is, but with this bigger one, the lymph buildup is much more even across the entire penis shaft.

It’s possible that the amount of lymph build up hasn’t really changed, but that it’s dispersed more evenly across my entire penis which gives the illusion of being much less.

3) Post workout ache is back in spades. You know that good ache, which doesn’t actually hurt, but feels a bit sore and makes you know that your penile tissues got a really nice workout. That’s how I felt after my third and final set with this new cylinder. On my smaller one, this feeling went away once I was able to pack it completely.

Negatives:

1) It’s fucking uncomfortable! I guess because the diameter is greater, the base of the cylinder is pushing hard against my groin in areas that I’m not used to. I always push the cylinder firmly against my groin to make the best seal possible, but the discomfort this caused was verging on intolerable, especially once I dialed up the pressure to 15Hg. I may need to get a silicone pad or something, so if anyone knows where I can get one, that would be awesome.

2) In my second set, I had a tiny bit of my nutsack get sucked into the cylinder because I didn’t seat the cylinder firmly against my groin and my base girth isn’t big enough yet to fully plug the cylinder without some manual assistance. Not a big deal, but it surprised me because that had never happened to me before.

That’s basically it. So far, I don’t think I’ve wasted my money on this cylinder. I’m confident that I will get some nice gains out of it, with girth increasing faster than length.


Starting stats: NBPEL 6.85" BEG 5.25" MSEG 5.00" || Current stats: NBPEL 8.40" BEG 7.00" MSEG 6.40"

Progress report thread with pics. Legit NBPEL 8incher!: Success has never been so easy

I prefer Velseal cylinders from Pumptoys as my usual if I’m pumping high pressure manually. They come with a silicone seal that acts as a cushion.

But, if that option is kind of moot due to your purchase already…I would buy one of their cushions. They don’t fit perfectly on a Thickwall cylinder but certainly would help. The Velseal cushions are sold separately for say $25-30, I forget. But that would be my next move if I were you.


Now: 9.13" BPEL x 6.375" MSEG as of 5/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

Second the thoughts on the Velseal.


Started 7.75x5.75

Currently: 9.75bpX6.75eg My Picture Thread

Goal:10.0bpX7.25mseg Building a thicker unit, click by click, pump by pump, jelq by jelq!

To prevent your balls getting sucked into the tube and perhaps help with the discomfort, do one 10 to 15 minute set in your smaller tube to get your girth increase going and then switch to your new tube and continue your routine.

Going up to 15”hg is very high. You might just try staying at the 12”hg level for the same amount of time you would spend at 15”hg just to see if you might get the exact same result. Getting the same result at lower pressure is great for preventing excessive trauma.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
DIY: Make your own flared gravel vacuum cylinder!mankiPenis Pumps910-18-2007 03:26 AM
Shapelock - custom cylinder foot in 5 minutescbwtg01Penis Pumps708-08-2007 09:01 PM
Photo-Documented DIY cylinder guide!secjayPenis Pumps1612-19-2004 04:22 PM

All times are GMT. The time now is 06:17 AM.