Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Are conversion collars ok to use Also, what if the cylinder is too 'small'

12

Are conversion collars ok to use Also, what if the cylinder is too 'small'

Sorry it’s me again with yet another pumping question (or two!)

Many of the pumping kits come with a 2" cylinder - I haven’t measured yet, but what if your ideal size is 1.75" (according to the sticky thread in the pumping forum), is it ok to use a conversion collar that brings the size back down? (Like this one: http://www.peni senlarging.co.u … &CATID=93&USER= )

And what if the 2" cylinder is too small? Say my base girth is 7 and the recommended size is 2.50 but I use the 2" that comes with the kit - will that help me get longer as opposed to thicker? Will it feel uncomfortable?

I have a curious mind hence all these questions lol.

Anyone?

Originally Posted by UKDude
Sorry it’s me again with yet another pumping question (or two!)

Many of the pumping kits come with a 2" cylinder - I haven’t measured yet, but what if your ideal size is 1.75" (according to the sticky thread in the pumping forum), is it ok to use a conversion collar that brings the size back down? (Like this one: http://www.peni senlarging.co.u … &CATID=93&USER= )

And what if the 2" cylinder is too small? Say my base girth is 7 and the recommended size is 2.50 but I use the 2" that comes with the kit - will that help me get longer as opposed to thicker? Will it feel uncomfortable?

I have a curious mind hence all these questions lol.


Dude. It is difficult to answer theoretical questions.Also rather timewasting for mods.

The best thing is to tell us your measurements. Then we can make a reasonable guess as to what you require

So get measuring, then tell us what you want to aim for, and we then can give you - in our opinion- the best sizes to go for

In any case you really need to measure now before you start so that you know what gains you make

By the look of it, the conversion collar fits at the base of the tube. So it is more likely a toolk to prevent your balls being drawn into the tube. That’s only my opinion though.


Don't be a lurker left out in the cold. :lurk: Join the happy band of donors!

Psst! The link is at the bottom of the page :bigwink:

It doesn’t really make any difference does it? (And someone else could be wondering the same?) Nowt wrong with being curious - the more you know the better you are informed and more knowledgeable about the topic in general :)

Maybe I should have just put my questions a little better..

- Is it ok to use conversation collars?

- Why shouldn’t you use a cylinder that is bigger than the recommended size for you?

- Why shouldn’t you use a cylinder that is smaller than the recommended size for you?

Originally Posted by UKDude

- Why shouldn’t you use a cylinder that is bigger than the recommended size for you?

- Why shouldn’t you use a cylinder that is smaller than the recommended size for you?

I’m interested in this too! What will or what can happen? Is is dangerous, will the gains be bad if it’s not a correct cylinder size etc.


Started: 15.5cm x 12cm, Now: 19.5cm x 13.3cm, Goal: 21cm x 15cm

I'm going to reach my goal, and there is no one who can stop me! Yes, I'm a persistent bastard :D

My Pictures! I am back baby, and I will hang out with my wang out!

UKDude— no there’s nothing wrong in knowledge for knowledge’s sake— so if you really do care then you should do the actual research and not simply ask someone else to do it for you.
Tit told you that you were eating up mod time with theoretical queries.

Now define too big or too small.

IMHO there’s nothing wrong with using a larger tube as long as you can maintain a vacuum seal— the whole point is expansion.

Too small is a problem if you can’t get full expansion— so why would you bother?

And if you need to use a collar then use the collar.


WE are the 99% 'WE are the people you depend on; we cook your meals, we haul your trash, we connect your calls. We drive your ambulances. We guard you while you sleep. Don't f&ck with us'-- Madame DeFarge

"Rope trades @$10 a yard. I wonder if they even know that?"- Capitalist

Originally Posted by androNYC
UKDude— no there’s nothing wrong in knowledge for knowledge’s sake— so if you really do care then you should do the actual research and not simply ask someone else to do it for you.
Tit told you that you were eating up mod time with theoretical queries.

Now define too big or too small.

IMHO there’s nothing wrong with using a larger tube as long as you can maintain a vacuum seal— the whole point is expansion.

Too small is a problem if you can’t get full expansion— so why would you bother?

And if you need to use a collar then use the collar.

Originally Posted by avocet8

I did a lot of reading about vacuum erection devices and decided that two elements were especially important to me: a pressure gauge and the size of the cylinder I started with. I purchased a hand pump with a gauge from a company which believes strongly, as I do, that one cylinder size does not fit all and that gains will be more consistent and pumping will be far safer if you start out with tube designed for the erect dimensions of your own penis. Several pump companies offer a sizing chart and measuring instructions (Do Not Cheat, guys; your goal is not to impress the pump manufacturer; they don’t care.)

Vacuum pumping 101 Thread, but still I’m interested in a advance explanation on this.


Started: 15.5cm x 12cm, Now: 19.5cm x 13.3cm, Goal: 21cm x 15cm

I'm going to reach my goal, and there is no one who can stop me! Yes, I'm a persistent bastard :D

My Pictures! I am back baby, and I will hang out with my wang out!

If you go to the pumpers forum, you will gain some insight as to which members you can get the greatest knowledge base from.
Selecting Your Cylinder Size <——-good starting point

Vacuum Pumping 101 <——invaluable starting point!

Sometimes it is not as important to know the detailed answer , but where to find it!


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 6" NBPEL x 6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

Originally Posted by androNYC
UKDude— no there’s nothing wrong in knowledge for knowledge’s sake— so if you really do care then you should do the actual research and not simply ask someone else to do it for you.
Tit told you that you were eating up mod time with theoretical queries.

Now define too big or too small.

IMHO there’s nothing wrong with using a larger tube as long as you can maintain a vacuum seal— the whole point is expansion.

Too small is a problem if you can’t get full expansion— so why would you bother?

And if you need to use a collar then use the collar.

I did do a search, and I looked at the cylinder sticky. But the information was insufficient (it just says that a cylinder too big will suck up your balls too - but I wanted to know if there were any actual negatives to PE). There are probably threads that discuss cylinders which are too small but I didn’t find any via the search (the search system in vbulletin isn’t great actually - that’s pretty well known) and I only found one of them by chance and that was -after- posting this thread.

I didn’t mean in general Richard.. I meant in regards to the cylinder size.

Well, I just started pumping, but have been studying much.

The conversion collars are to a degree, from what I gather, going to simulate a “cock ring effect, depending on size and what not. They appear to be viewed as, perhaps a more economical solution to having a cylinder collection.

The wider cylinder, say a 2” for a 5.25” girth should, in theory, allow for more girth expansion and less glans oriented vacuum.

Using a tube that you fill out in girth will therefor cause greater vacuum for means of length, but you have to pay attention to how much is being exerted on the glans to avoid blisters and other such nastys.

I started with a 2” Jim Diamond. I am ordering a 1.75” JD today and if I like pumping as a whole, then I will order a wide mouth oval cylinder and probably buy one for Sta-Kool for his birthday as he has been great help in my pumping journey and very supportive! I think that the idea of buying a 1.75”, working into packing it and then moving up to the 2” is a great idea. Growth in stages mate!


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 6" NBPEL x 6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

Thanks Richard. It seems you are well on your way to becoming a ‘pumper’ lol.

I am still a little undecided - I’m not keen on shaving as when I’ve tried that in the past I’ve found it gets ‘itchy’, could get the tweezers out though LOL

I was going to get the kit which only comes with a 2” cylinder hence wondered what may be the negatives if it is too small or big for me, and whether a converter would be more than acceptable. (Just out of curiosity if nothing else)

I’m just under 7” long (from bone) so was interested in more girth than anything else.

Good luck!

If I were you and going for girth, I would buy a Jim Diamond cylinder sized based on Advocet8”s advice. I am 5.25” and am recommended the ideal 1.75” tube. I took the advice of the thread and went with 2” to work on girth. The JD is 2” x 9 inches long, so I feel like I’m getting an all around expansion rather than packing and just getting a length or Head expansion. Damn dude, are you 7” base girth?


Starting stats NBPEL 6" x EG 4.125" --> Mar 2008 NBPEL 7" x EG 5.25" Current Stats 6" NBPEL x 6" EG (Post 1st Round PMMA)

My noose style extender modification

My jelq routine

You don’t have to shave if you don’t want to. I just trim a little bit, like I would anyway. Petifaun has the secret for getting a good seal here:

petitfaun - Newbie can’t get a perfect seal — is continually pumping the pump ok?

Originally Posted by petitfaun
Down the bottom end it’s as well to use a water holding lubricant for the seal and to rotate the cylinder on your skin. Make sure you place the lubricant on the outside as well as the inside and base of the tube. You will soon know if the seal is tight as the vacuum quickly pulls your penis up the tube if the seal is good. Otherwise try some more lubricant and water.

(I usually wipe the lubricant tround the edges with my finger, then just dip the base of the tube in water. Then place it firmly against the ‘fatpad’ and twist it a half turn left and right. Hold it against the pad and pump.)

Originally Posted by 9_in_richard
I will order a wide mouth oval cylinder and probably buy one for Sta-Kool for his birthday

YEAH!!!! :jumpred:

Ah, 9_in_richard, you don’t have to buy me anything — happy to help.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Pumping Question re cylinder size and packingmugglesPenis Pumps1107-21-2008 11:33 PM
DIY: Make your own flared gravel vacuum cylinder!mankiPenis Pumps910-18-2007 03:26 AM
Need Step by Step instructions on making a new cylindermickfoleyPenis Pumps504-03-2006 09:17 AM
Photo-Documented DIY cylinder guide!secjayPenis Pumps1612-19-2004 04:22 PM
Note On Cylinder Diameter!!bigjackPenis Pumps311-17-2002 07:02 PM

All times are GMT. The time now is 12:45 AM.