Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Vacuum Hanging 2019: thoughtfulgold

Vacuum Hanging 2019: thoughtfulgold

This is the start of my vacuum hanging thread. I am going to be using an LG vacuum hangar for this endeavor and will primarily be hanging for the next year. I will include pics and a first impression review of the equipment and also be covering what approach I plan to take to hanging.

Currently I have a prototype seated hanger built that is pictured below. It needs one more mild modification to fit completely under my desk. The concept behind it is having the first pulley at the height of my crotch for the pulley to tension my cable (flat 650 paracord) directly forward for seated straight out use. Then the second pulley take the cord slightly higher and the weight dangle beneath the archway completely free of obstruction high enough to not be grounded on the floor.

I built it out of a laminate shelving base (OSB would be cheaper and stronger but more warped and prone to splintering and 4x4” lumber (entirely too strong and heavy for this) and a 2x4” (which if I could pick them better this entire endeavor could have been made from.)

I’ll be cutting some of the rear of the base away so it can slide further under the desk. This is going to be the main part of hanging that makes it doable. Being seated able to use my computer.

Including my hypothetical premise, parameters and other factors I’ll be having as part of the experiment in a post later this week. But this is 2019 coming to life.


Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.


Last edited by thoughtfulgold : 01-06-2019 at .

The penis depot has a vacuum hanging tube. I have one it works very good

I am in the process of designing a penis stretching chair. Will keep everyone in the loop

I’m looking forward to the detailed reports you always give TG. The LG is about the only purchase I’m considering making right now.

Originally Posted by piercedkeith
Here they are

I couldn’t find these on the site you mentioned. I’ve NEVER seen anything like these items before. They seem worth a look indeed. I’m already impressed at the concept.

But I’m going with the LG for this year at the very least so…best of luck piercedkeith!

I did a floor apparatus and had to adjust it. I’ll be posting here with its effectiveness and probably getting a female friend to get pictures of me in the apparatus for my picture thread (since they’ll technically be nude pictures) but…any ideas for seated hanging are good. That is how you can ease the load of the time hanging takes.


Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by da_dt
I’m looking forward to the detailed reports you always give TG. The LG is about the only purchase I’m considering making right now.

Well I’m starting my report now. I’m going to give the quick tabletop review of the Hangar and start using it this week (I promise!)

First impressions are strong, believe me.


Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

LG Hangar: First Impressions

Customer Service

First things first, a shout-out to Marlon for answering all my questions via email while completing my order. Second, a shout-out to Stacy, who is basically the receptionist, for telling me all about the product when I called to ask questions. It’s a duo that I gotta respect, because they both gave me insight into hanging and vacuum that I did not have before and…that is saying something given the amount I’ve already spent on Penis Enlargement and the sheer time logged doing it that I have.

I can say with certainty if you have questions, either of them can answer them. I asked everything. I asked how they use the numbers you provide, why, what happens if the cylinder is too small, how long does it take before you need one larger…If you got questions before you buy, they will answer them. Period. You can call or email them.

Plus, Stacy is really nice. She doesn’t do the hard salesperson thing where they keep talking about their product needlessly. She only mentions the product if you ask about what makes it different or features of the product. Which I find refreshing, as far as any retailer of specialty products is concerned. Considering we talked on the phone for 40 minutes without her crowding me with sales pitches, I think that’s a pretty serious statement.

Equipment in Package B Kit

Pictured below: This is an LG Hangar Package B + Bundle Arms kit.

1. LG Hanging Cylinder Custom made to order, with sleeve attached and secured by rubber band. Something the picture cannot show is the groove machined into the cylinder for the rubber band that secures the sleeve quite nicely. They’re quality rubber bands and they’ve got the company name printed on them and are in blue, my favorite color.

It uses a standard female pump coupling so you can easily attach a handpump and pump it to pressurize it before removing the hand pump and starting your session. They can provide you with a hand pump with gauge but I opted not, since I have a reliable one and don’t need an extra one.

2. Bundle Hanging Handles: This is an upgrade that sets the LG Hangar apart from other systems. They provide some custom machined metal (I think aluminum but didn’t ask) handles that screw into the sides of the cylinder creating a pair of handles by which you can turn the vacuum chamber while it is pressurized. The finish is similar to that of decor in your home of a brushed stainless steel light fixture or faucet. A bit nicer than…dick enlargement tools need to be, which is very nice and worth a chuckle lol.

3. Tape: I’m going to go without, as I have excessive pumping practice at extreme levels and normal levels. Tape would just slow me down and aggravate me. I didn’t use the tape that came with my Xsleeve kit either (after the first few times) but I recommend you try it once to see if it is something you need. I may come back to it but…for now, not using it.

4. Spring clasp for attaching load/Velcro cuff- If you have never set up a hanging system a clasp is key. Personally I will likely use a small metal post to crossbar against the nicely placed eye hook in the very thick (literally about an inch thick) top of the cylinder. So really it depends on how you secure your load and what you’re using to generate weight that will determine if you even need this particular clasp over some other connection. I have a weight galley and this clasp would be useful if I was NOT running cord an1d pulleys between my hangar and the load itself.

5. Not pictured (post attachment limit exceeded)- A baggy with a papertowel wrapped spare sealing sleeve and two rubber bands. It’s wrapped and sealed because silicone gets dirty and dusty almost as soon as it is exposed to air and I don’t think I need to open that up to show you when it’s pretty much the same thing that is already attached to the cylinder and I don’t need it yet. Just know they have you covered. The system isn’t cheap but it’s designed to run a while without any maintenance or additional purchases needed.

Since I have to be special, I’ll take pictures of how I secure the load but…the spring clasp is one of the more solid ones I’ve handled.

Closing Thoughts

With an increasingly crowded market for vacuum products (the pump tube hanger is a new one on me above this post) the customer service is going to be key for a company to continue to stay on top of the market. As someone who regularly corresponds with monkeybar at autoextender, Dave at Pumptoys and the one guy at Hardwear (hardboy network) that helped me with all my horseshoe cock rings (who remembered me with a 5 gap in buying stuff for me to get my sex cockring last year)…you want to create a rapport with your customers. You want to remember them years down the line when gear is lost, broken or outgrown and they need to set up a new system. I’ve done it with those other vendors…and if I hang long enough successfully I could see doing it with LG Hanger.

Really, if I can say that…then I think it’s worth it and that…is enough said.

Attached Images
Bundle Hanging Handles.jpg
(724.8 KB, 148 views)
Tape.jpg
(769.9 KB, 116 views)
Load Spring Clip.jpg
(716.0 KB, 118 views)

Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.


Last edited by thoughtfulgold : 01-13-2019 at .

I love the organization, creativity, and laser focus. Thank you for sharing this with us, looking forward to following this thread.


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think I can...Little Engine’s Climb

I too am looking forward to this thread. Here a recent response from Pathright the makers of the Restorex system:

“Good to hear from you. We continue to recommend 60 minutes per day for 12 weeks in the form of 2, 30-minute sessions per day for 12 weeks. The clinical study DID NOT show any benefit to increased treatment time of 3, 30-minute treatments per day.

Let us know if you have any other questions and have a great weekend

PathRight Medical Support Team”

The results that they’ve obtained from 2 X 30 minute daily high tension traction sessions a day has been remarkable and supports the idea that statistically significant results can be achieved with higher tension and less time.

LG I believe supports the idea of 2 hour long sessions a day. Not sure what protocol you’re thinking to follow, but there is a lot of anecdotal and now clinical data to support a higher tension and/or shorter duration approach.

So I think it is timely that you bring your experience into this, to explore idea.

Best of luck with it TG, the LG is an excellent piece of gear.

I really recommend some sort of wrapping though.

Originally Posted by capernicus1

Best of luck with it TG, the LG is an excellent piece of gear.

I really recommend some sort of wrapping though.

+1,i did hanging for over a year and that’s all I used,love the product I currently use it for stretches.


2014, 6 1/4 bpel by 5 3/4 eg

2017,7 3/8 bpel by 6 1/4 eg

LG Hangar Round #1- Wrap, do not be dumb.

After doing my tabletop review I decided to do a session. It’s haphazard as I was just edging and said “Hell, let’s do it” but I’ll relate that session here.

Session Notes

1. Rolled the sleeve back until it was around the opening of the cylinder. Opening was completely unobstructed (will include picture below) **Pictures are below!

2. Place strip of tape around shaft just under glans. If you do not, foreskin will be sucked into the chamber and that’s gonna pinch. Ask me how I figured out that gem of knowledge.

3. Place glans in chamber. Do it snug to the top of it. When you roll the sleeve down and place weight on the chamber your glans with both move down in the cylinder and expand upwards. Starting half in the cylinder will likely cause a poor and uncomfortable seal.

4. Roll sleeve from outside of chamber down around tape covered portion of shaft. It will snap down a bit. Not enough to hurt but kind of like a rubber band. I rolled tape on part of my shaft not all that the silicone covered. I wanted some direct traction. Your wrap will be based on comfort. I have pics of that here: LG Hangar Round #1 Uncensored- Cylinder fit and post session edema and stretching

**5. Glans in chamber. Chamber sealed by sleeve. Get your hand pump with gauge and pressurize it. This is key and tricky.

Take it to 6-7.5HG. Now, if you want you can leave your pump attached but I remove it. Yes, tugging on it will increase pressure. You do need conditioning to use the LG. I did high pressure pumping for a year so I was perfectly fine. You will need to start with low weight and duration and slowly walk durations up if you don’t have heavy pumping experience.

Special Note: After this session and others, I usually use the range of 7.5HG-12HG to pressurize my cylinder best. I like it higher than 6-7.5HG that I started this endeavor with and want that to be understood for those reading through this log.

6. Attach weight. Run session. I ran an hour seated, straight down with 3.75 pounds. No pulley use. Didn’t feel like screwing with it. Felt great.

7. Conclude session. Remove weight. Attach pump to cylinder. Release pressure. Place finger in sleeve alongside shaft and in cylinder. Tug chamber off while spreading silicone sleeve with finger.

Other Notes

1. You need to shaft wrap. Otherwise it pinches. An hour was nice with wrap. 10 minutes without was direly annoying. Not painful. Annoying. Use the wrap. Seems to be a basic bandage tape. Reusable and probably inexpensive to replace.

2. It felt good. I liked the post session shaft engorgement. It will help my glans grow. Looking at where my glans shifts in the cylinder I could gain a half inch in length and quarter in glans width. Which would be amazing. Time will tell. Post session measure was a firm and full but not bigger glans.

3. Seated without pulley I will want a new desk chair.

Attached Images
LG Hangar opening #1.jpg
(676.7 KB, 74 views)
LG Opening #2.jpg
(761.0 KB, 95 views)

Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.


Last edited by thoughtfulgold : 01-23-2019 at . Reason: *pictures added!

Originally Posted by LittleEngine
I love the organization, creativity, and laser focus. Thank you for sharing this with us, looking forward to following this thread.

I appreciate the vote of confidence. I’m a thinker and maybe I think too much about making my dick bigger but…I like to think I’m getting the hang of it.

Originally Posted by Buckfever
I too am looking forward to this thread.

LG I believe supports the idea of 2 hour long sessions a day. Not sure what protocol you’re thinking to follow, but there is a lot of anecdotal and now clinical data to support a higher tension and/or shorter duration approach.

So I think it is timely that you bring your experience into this, to explore idea.

I plan on a session daily, maybe 2. Your message from Restorex is interesting but I have a plan in motion already. Similar to your approach incidentally enough.

Originally Posted by capernicus1
Best of luck with it TG, the LG is an excellent piece of gear.
I really recommend some sort of wrapping though.

Tried it without wrap. Utter pits. Not doing that. But my glans is tough. I didn’t blister after a year of high pressure so I doubt I’ll blister now. But shaft wrap prevents vacuum pinch. That’s important.

Originally Posted by b balls
+1,i did hanging for over a year and that’s all I used,love the product I currently use it for stretches.

I doubt I’ll stretch with it but I’ll use it till it doesn’t fit anymore.


Now: 9.125" BPEL x 6.25" MSEG as of 1/1/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My current hanging project and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *9* years in and counting. All you have to do is put the work in and keep the faith.

[QUOTE=thoughtfulgold]
I appreciate the vote of confidence. I’m a thinker and maybe I think too much about making my dick bigger but…I like to think I’m getting the hang of it.
[QUOTE]

You funny, much love TG


Once upon a time (2015): 6.40” x 4.50”

Today: 7.25” x 5.00”, Thunder Cocks Unite!

I think I can...Little Engine’s Climb

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
Hanging w/ a Vacuum Tube as the "grip"jungPenis Hangers807-30-2017 09:46 AM
Vacuum Hanging TipmogroPenis Hangers312-04-2006 08:25 PM
wrapping & vacuum hangingfuncrewPenis Hangers011-21-2006 07:02 AM
Question about Vacuum HangingcriotPenis Hangers1407-27-2006 01:56 PM

All times are GMT. The time now is 06:48 PM.