Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Bib without padding

@Tomray sad too hear got an injury. But isnt it 4 lbs too light to get injured. Just saying. Maybe you have issues with wrapping also. Because I think if you thigten enoug the hanger won’t slide with that kind of lbs.
Just saying my experience.

I think I need to get the hardcore and the mh2 . For the real review. But I’m broke for now.

Just wanna ask aboout bib relating to his hanging carrer because I don’t really know the history of bib.
Was bib hanging before he realeased his hanger a bib homemade hanger which is pvc(rounded) that also has no teeth. But could grip heavy weight lbs(he already gained big at that time?)?

Weight depends on conditioning. 2.5lbs used to feel like 5lbs which used to feel like 10lbs. But its a peice of shit hanger… Its seriousely a peice of shit. The MH1 was cool but the MH2 hanger is so shitty I could call it a scam if I didn’t get it for free. Everytime I put it on I think penis death trap lol. It has no teethe. It does not grip the penis…. Which means it would mostly be a skin stretch if at all internal….. Grip is half the lig stretch/gain like with jelqing… Like wtf.

The male hanger 1 is very good hanger though. Still making microtears a year later!

Attached Images
000_0201.JPG
(688.0 KB, 34 views)
000_0197.JPG
(748.3 KB, 34 views)

BPEL: 8.35"/ NBPEL:7.0" /EG: Apprx. 5.5"


Last edited by TonyThaTyga : 09-05-2015 at .

I’ve wondered myself how the MH2 can actually grip. The Bib has “fingers” which really grab the internals. Of course MH1 was simply a copy off the HC Bib, which is why people say it worked so well.

Tony, have you spoken with Ben about the MH2 and how lousy you feel it is? I’m curious to see what he says.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

MH2 is crap, haven’t spoke with the guy and I will not do it in the future, I’ll try buying a second hand bib hanger or I’ll do some modifications on MH, I will post pictures. I will try to replicate the fingers and also some other minor modifications.


03/27/2015 BPEL 5.5" Current BPEL 6.8" Goal BPEL 8.5-9" EG 4.9" EG goal 6"

I'm targetting length for now. Any advice would be appreciated, Thanks!

I’ve wondered Mr. Schlong, I think I saw a really old post of you gaining 1/2” in a month with the bib, can you tell me the difference between the two if you know? I’m basically curious as to whether hanging above 30lbs would be painful with because I would like to venture off into unadapted weights again. I’m going to suggest to Ben and Bib as well. But based off what everyone including you is saying that its based off of some “hardcore” version of a bib hanger, so I wonder if I could hang heavier weights with a softcore version of a good hanger for when I get to that range again.

And no but I will right now. He does offer the cheapest hangers on the market as far as I can tell and does have a good position of control because of it. I will beg haha.


BPEL: 8.35"/ NBPEL:7.0" /EG: Apprx. 5.5"

Originally Posted by tomray
MH2 is crap, haven’t spoke with the guy and I will not do it in the future, I’ll try buying a second hand bib hanger or I’ll do some modifications on MH, I will post pictures. I will try to replicate the fingers and also some other minor modifications.

I’m hanging 17 lbs. without any slippage at all.I use 18 inches of Scunci hair/head wrap material and 24 inches of no-hurt Ace wrap.

The MH does have some “ridges” but they are not as pronounced as the BIB starter.I plan on switching back and forth between the two hangers.I also plan on purchasing the “BIB Hardcore” which I should have done in the first place.No hanger is “Comfortable” at heavier weight,it becomes tolerable.

All of these hangers have their pros , cons,and quirks to work around.

Attached Images
BIB VS Male 054.JPG
(478.9 KB, 35 views)

Ben the maker of MH basically said that he wants to turn his profit from all the MH2s he’s had made before ordering more “molds” or whatever to start considering starting the process for making hanger specifically for heavier weights. I will just tell him it atleast needs teethe and be made out of what the MH1 was made out of. And bib is like people use my hangers at like 60lbs lol. I just wish there was just one out there that was designed specifically for really really heavy weight.

Ben suggested a hanger called snake hanger or something which is supposed to be designed for that purpose instead though.


BPEL: 8.35"/ NBPEL:7.0" /EG: Apprx. 5.5"

Unfortunately the glans & skin can take a real beating above 15 lbs. with any type of compression hanger.For some reason my Bib pulls more skin than my MH. I’m attaching the MH fairly high up which is taking some pressure off the glans.The Bib allows more blood flow than the MH but just doesn’t seem to grip as well.

I personally don’t see the “fingers” doing much for gripping power on the Bib starter.

Originally Posted by TonyThaTyga
I’ve wondered Mr. Schlong, I think I saw a really old post of you gaining 1/2” in a month with the bib, can you tell me the difference between the two if you know? I’m basically curious as to whether hanging above 30lbs would be painful with because I would like to venture off into unadapted weights again. I’m going to suggest to Ben and Bib as well. But based off what everyone including you is saying that its based off of some “hardcore” version of a bib hanger, so I wonder if I could hang heavier weights with a softcore version of a good hanger for when I get to that range again.

And no but I will right now. He does offer the cheapest hangers on the market as far as I can tell and does have a good position of control because of it. I will beg haha.


Tony,

I had great gains with my homemade hanger and then went on to further gains with the HC Bib. The max I got up to on my HC was 27.5 lbs. Thirty was too much and I couldn’t keep the hanger from slipping.

Other people have come up with their own hangers like Saiyan (who was banned from here, so he hangs out at MoS and Dashdeming. Apparently theirs can hold weights of 30 pounds and more, somewhat comfortably. I can’t really fathom what a “softcore” might be. Either way, that much weight is uncomfortable and hard to lock in on your wang. I suppose I needed to work on my wrapping.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Originally Posted by tomray

MH2 is crap, haven’t spoke with the guy and I will not do it in the future, I’ll try buying a second hand bib hanger or I’ll do some modifications on MH, I will post pictures. I will try to replicate the fingers and also some other minor modifications.

His MH1 was a copy of the HC Bib, which I found needed no improvement.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Originally Posted by TonyThaTyga
Ben the maker of MH basically said that he wants to turn his profit from all the MH2s he’s had made before ordering more “molds” or whatever to start considering starting the process for making hanger specifically for heavier weights. I will just tell him it atleast needs teethe and be made out of what the MH1 was made out of. And bib is like people use my hangers at like 60lbs lol. I just wish there was just one out there that was designed specifically for really really heavy weight.

Ben suggested a hanger called snake hanger or something which is supposed to be designed for that purpose instead though.


Bib has said his “Original” is able to comfortably handle higher weights because it’s a bigger piece, so the weight is more even,y distributed.

The Snake Hanger is what I was talking about a couple posts up from King Snake, aka Saiyan.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Nice info mr. Scholng , to people don’t know a lot about homemade hangers like me. Thanks

@Mr.scholng after googling the snake hanger. The hanger lenght if I’m not mistaken is 3-4 inches lenght. I hope someone correctcs me about iit if wrong. Is bib original 3-4 inches lenght too?

If they are the same lenght, a heavy hanger should be lenghty.

Do you think bib should make a bib hardcore original?

I just also want to know, why the top bolt of hanger is only one, why at the bottom two?

Do you think two top screw or bolt(I don’t know what does it call) will make a diff?

Which one is the best buy for heavy hanging as of now(25lbs up), hardcore or snake hanger?

Thanks

Oh yeah I used to read that guys posts wtf? lol. It looks like he’s just giving instructions on how to make the hanger rather then selling them and i’m not one for home made PE gear when I can go get something someone spent hundreds or thousands to make. Mr. Schlong, can you tell me which model of the bib you said could handle heavier weights please? I know this MH1 will get too uncomfortable eventually…. Ha.


BPEL: 8.35"/ NBPEL:7.0" /EG: Apprx. 5.5"

Originally Posted by iam8x6
Nice info mr. Scholng , to people don’t know a lot about homemade hangers like me. Thanks

@Mr.scholng after googling the snake hanger. The hanger lenght if I’m not mistaken is 3-4 inches lenght. I hope someone correctcs me about iit if wrong. Is bib original 3-4 inches lenght too?

If they are the same lenght, a heavy hanger should be lenghty.

Do you think bib should make a bib hardcore original?

I just also want to know, why the top bolt of hanger is only one, why at the bottom two?

Do you think two top screw or bolt(I don’t know what does it call) will make a diff?

Which one is the best buy for heavy hanging as of now(25lbs up), hardcore or snake hanger?

Thanks


Glad to help where I can. I know very little of the Snake Hanger, except that it can supposedly handle a lot of weight.

The original Bib is padded and the area for your shaft is roughly 3 inches. If I understand you correctly, you are asking if Bib should or would make an unpadded original, right? I have spoken to him and he has no intentions of doing this. I wish he would, but he hasn’t yet and probably won’t.

The top has only one bolt because that is what locks it in place. The two bottom bolts generally stay put once you have configured it to fit your needs. Adjusting the bottom bolts will make the hanger (from a bottom view) either look like / \ or | | or \ /. Most everyone has theirs like \ / or | |. Otherwise, it gets very hard to lock in the top bolt. There would be no need for a second top bolt.

If you want to save money, you can make the SH or get charged a LOT from King Snake to make you one. It really is a shame Ben stopped making MH1. Also - if you have no experience hanging, Bib does not recommend starting with the hardcore. I say you’re fine, but you will need a lot of extra wrap. Hope this helps.


Serious starting point: Nov. 2, 2009/BPEL 5.75 x 4.75 inches.

Current BPEL 7 1/2 x 5.5 inches.

Goal: BPEL 8 x 6 inches. Hell, if I hit 8, I'm going for 9!

Top

All times are GMT. The time now is 12:52 AM.