Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

The SuckXtender - just remember it sucks!

RTG, Eroset

Please post pictures of your rigs once they are complete, it would be interesting to see what twists you come up with.


regards, mgus

Taped onto the dashboard of a car at a junkyard, I once found the following: "Good judgement comes from experience. Experience comes from bad judgement." The car was crashed.

Primary goal: To have an EQ above average (i.e. streetsmart, compassionate about life and happy) Secondary goal: to make an anagram of my signature denoting how I feel about my gains

Week 4 - LegXtender (i.e. the bungy)

…………..Hrs “up” Hrs”down” Weekly Hrs Cumulative Hrs BPFSL Before After

Week 1……..0……….12…………12………….. . 12………………..6.9”……6.9”
Week 2……..0……….12…………12………….. . 24………………..6.9”……6.9”
Week 3……..0……….13…………13………….. . 37………………..6.9”……7.0”
Week 4……..0……….12…………12………….. . 49………………..6.9”……7.0”

God this is slow… strangely enough my flaccid is looking better, but that is not reflected in BPFSL.


regards, mgus

Taped onto the dashboard of a car at a junkyard, I once found the following: "Good judgement comes from experience. Experience comes from bad judgement." The car was crashed.

Primary goal: To have an EQ above average (i.e. streetsmart, compassionate about life and happy) Secondary goal: to make an anagram of my signature denoting how I feel about my gains

Originally Posted by mgus

Oh, by the way, RTG’s price qoute was not entirely accurate - the full cost is materials + $10 royalty, care of Thunder’s Place (just send it as a donation!).

My bad, mgus! Forgot about that. :leftie:


-rtg

Originally Posted by mgus
RTG, Eroset

Please post pictures of your rigs once they are complete, it would be interesting to see what twists you come up with.


Will do. Mine will be a SuckXtender that you can turn into a LegXtender. Two, two, two tools in one. :D


-rtg

Eh.. negative on my air freshener cap.

It’s not deep enough, the edges of my glans keep getting sucked up over the edge of the cap and get pinched in the sleeve. Hurts like hell. At first I thought it was the sleeve, I tried surgical glove finger, dishwashing glove, condom, and other stuff over the past couple days. But after trying it again tonight, I can see it’s the depth of the cap that is the problem.

Guess I’ll try the film canister again with a little straw to let the air out while trying to squeeze into it. :(


"It's ALL in your head. You just have no idea how big your head is." - Lon Milo DuQuette "The mind's role in P.E. is more important than the hand that touches the penis." - Mr. Nine Just ignore the crazy old man in his tinfoil-lined pyramid hat, smelling of EVO and muttering Ohhmmm my penis growwwws. He's not always to be taken literally.

Hey eroset. Go to a local drug store and look in the hair care section. I did that last night at CVS. I found the perfect size cap from one of the hair gel products. You get some wierd looks from the employees when you take the cap off and shove your cock into it, but after a while they don’t even notice anymore.

Seriously though. I paid 3.50 for the bottle of hair gel. I figured it was a smaill price to pay. That took my total to a whopping $13 (plus $10 royalty donation to T’s place). I got it all together last night. Looks like it’s going to work well. I think the base ring I got is a little too deep so I am going to cut it. Then I will take some pics and post them when I get a chance. I can’t wait to use this thing!


-rtg

Originally Posted by RoomToGrow
Hey eroset. Go to a local drug store and look in the hair care section. I did that last night at CVS. I found the perfect size cap from one of the hair gel products. You get some wierd looks from the employees when you take the cap off and shove your cock into it, but after a while they don’t even notice anymore.

:rolling: Here comes that weird dude looking for his perfect cock-cap again. :nerner:

Well here are pictures of my first try even though it’s not quite right.

For the hardware, I used a male/female bolt thingie from a wooden swing set. The sealant is only around the female end, so the bolt can be freely unscrewed and hardware changed for switching from a leg-stretcher / light hanger to the traction stretcher mode. Although I haven’t built the rest of the traction rig with the base ring and side struts yet. I’ve got multiple bolts that fit into the female end, it’s pictured with a long bolt on it because I was just trying it as a manual stretching aid to test it out, and the long bolt was just easy to grab.

By the way, the few times I tested it, it felt great before my glans would slip over the edge and get pinched. Think this idea has tons of potential.

Thanks for the tip, RTG. I’ll hit Rite-Aid soon and try to keep it in my pants.

parts.webp
(12.4 KB, 281 views)
inside_view.webp
(9.5 KB, 258 views)
outside_view.webp
(7.4 KB, 241 views)
finished_suckx.webp
(5.5 KB, 284 views)

"It's ALL in your head. You just have no idea how big your head is." - Lon Milo DuQuette "The mind's role in P.E. is more important than the hand that touches the penis." - Mr. Nine Just ignore the crazy old man in his tinfoil-lined pyramid hat, smelling of EVO and muttering Ohhmmm my penis growwwws. He's not always to be taken literally.

Looks good Eroset. You may want to try picking up a small angle bracket for the Leg-stretcher function. It is a bit less bulky. Easier to hide. I will hopefully have some pics of mine tomorrow.


-rtg

Ok, guys here’s mine. I want to make one or two slight adjustments. I want to replace the the adjusting nuts with wing-nuts to make it easier to apply the stretch. I also want to look into getting a bigger base. I want to be able to put my balls in the base with the shaft, but I can’t do that currently because the base is a bit too small.

I tried it last night and all I have to say is OH MY!!! I had it on for about 20 minutes and boy what a stretch! And talk about comfortable. I hardly knew I was wearing it. I think I got my BPFSL to just over 7”, which is farther than I ever have. I also did my hard hitting girth routine last night right after using it, and let me say it is the best session I have had yet. While clamped my unit looked huge, so I got the tape. I measured just shy of 6” girth and 7 1/8” length. WOW! My best clamped measurement up till then has been 5 3/4” girth and 6 3/4” length! I have a feeling the SuckXtender is going to do big things for me, big things.

THANKS, MGUS AND MBUC!! This thing is AMAZING! That royalty donation to Thunder’s will be going out today!!

LegXtender side.webp
(37.1 KB, 266 views)
LegXtender top.webp
(44.6 KB, 230 views)
SuckXtender 1.webp
(48.3 KB, 248 views)
SuckXtender 2.webp
(90.0 KB, 236 views)
SuckXtender Top.webp
(82.9 KB, 239 views)

-rtg

RTG,

Glad to hear you like it, and hope it works for you. Sounds like you had it stretched pretty hard? I was thinking about digging up my old fish scale from the tackle box and putting on the LegXtender to get a feel for how heavy a good pull is. One could do that with the SuckXtender as well, by fixing a cord around the bracket, hook up the scale and pull out to desired load, adjust the wingnuts and voilá! Then you could experiment with load versus time versus lymph in glans.

BTW, what are you using as a seal?

Feel free to post your hours and BPFSL measurements weekly, if you want to.


regards, mgus

Taped onto the dashboard of a car at a junkyard, I once found the following: "Good judgement comes from experience. Experience comes from bad judgement." The car was crashed.

Primary goal: To have an EQ above average (i.e. streetsmart, compassionate about life and happy) Secondary goal: to make an anagram of my signature denoting how I feel about my gains

Originally Posted by mgus
RTG,

Glad to hear you like it, and hope it works for you. Sounds like you had it stretched pretty hard? I was thinking about digging up my old fish scale from the tackle box and putting on the LegXtender to get a feel for how heavy a good pull is. One could do that with the SuckXtender as well, by fixing a cord around the bracket, hook up the scale and pull out to desired load, adjust the wingnuts and voilá! Then you could experiment with load versus time versus lymph in glans.

BTW, what are you using as a seal?

Feel free to post your hours and BPFSL measurements weekly, if you want to.


I didn’t think I had it stretched too hard until I let it loose. It is easy to go overboard so I will have to watch that.

I am using the dish glove finger as a seal. Works fantastic. I didn’t even have to tape it to the cap. I had very littel lymph build up, but I only had it on for about 20 minutes.

I’ll try to keep track of my usage. Thanks again!


-rtg

I’m excited about this thread, I was toying with something similiar a while ago using a pill bottle and a hose attached to the side to create the vacum. It seemed to work fine, however I lost it along with other crap in a fire.

I am glad that it someone else got it to work.
Time to head out and get some supplies :)


** Take pictures, don't let the mind play tricks on you ** Then: BPEL ? x ? 2004 Jun 23: BPEL 6.0" x 5.1" BPFSL 6.5" 2004 Sep 16: BPEL 6.1" x 5.1" BPFSL 6.75" 2005 Jan 11: BPEL 6.4" x ?" BPFSL 7.00" - resumed after time off since 04 Oct 31 2005 Mar 08: BPEL ?" x ?" BPFSL 7.25" - the stretch feels completly different now, it seems i have reached a plateu 2005 Aug 25: BPEL ?" x ?" BPFSL 7.25" - resumed after about 3 months brake * I use BPFSL for consistency

Nice to see you join the SuckX Club, RTG! Feel free to join the fastest to a 0.5” FSL gain competition!

I haven’t been able to post much or do much PE the last couple of weeks. Here’s my latest update.

Week 9 - Suckxtender (ie the stretcher)

…………..Hrs “up” Hrs”down” Weekly Hrs Cumulative Hrs BPFSL Before After

Week 1……..4……….7…………11…………… 11………………..6.9”……7.0”
Week 2……..4……….0………….4…………… ..15………………..6.9”……7.0”
Week 3…….11………7………….18…………… .33……………….7.0”……7.1”
Week 4………3………3………….6…………… …39………………7.0”……7.1”
Week 5………6………7…………13…………… .52……………….7.1”…….7.2”
Week 6………6………5…………11…………… ..63………………7.1”…….7.2”
Week 7………8………8…………16…………… …79………………7.2”……7.3”
Week 8………3………3………….6…………… …85……………….7.2”……7.3”
Week 9………1………1………….2…………… …87……………….7.2”……7.3”


Feb 2004 BPEL 6.7" NBPEL ???? BPFSL ???? EG 5.65" Feb 2005 BPEL 7.1" NBPEL 5.8" BPFSL 6.9" EG 5.8" Feb 2006 BPEL 7.3" NBPEL 5.8" BPFSL 7.6" EG 5.85" Feb 2007 BPEL 7.3" NBPEL 5.8" BPFSL 7.5" EG 5.9"

RoomsToGrow, Mgus thanks for taking the time to answer my questions.

Mgus, have you only increased in BPFSL (that is bone pressed flaccid stretched length right?)?

The Mr. thought that this was pretty cool, he even asked if I was going to make it for him, so… it looks like I’m going to be making this.

I thought that starting with the legxstender would be a good place to start and it seemed simple enough. I’m also going to make a heating pad to accompany this (I have two different types in mind) my thinking is that the continued heat throughout the stretch might help.

I’m also working out ideas so that the stretching can also be done in different directions, not just down (up, left, right, and straight out, as is done in manual stretching).

I do have just a general question, for anyone who reads this, Is it normal to look really “veiny” (for lack of a better word) when PE’ing? He didn’t have all those veins “popping” out before he started (I’m referring to a normal erection). Is this normal?

Yes, CrazyLady, that’s normal. It comes with the territory for some guys. Increased blood flow translates into bigger veins after a while.

BTW, with my setup you can stretch in all directions you just have to rotate the base. It’s not the most convenient but it allows for stretching in every direction.


-rtg

Top

All times are GMT. The time now is 01:14 AM.