Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Need help from pro extender users

12

Need help from pro extender users

Hello everyone! In my PE career of two months I have been hanging using dumbell weights, a shoe lace and some tape, which has given me about 0.5 of an inch and some girth. I’m sure that if I continued this way I could reach a gain of 1 inch in a few more months, but as you can imagine it is not the most comfortable way of PE-ing.

So recently I bought the pro extender on Ebay. I’m having some problems and I must be stupid because there are no threads about this on any PE website. Basically, I cannot seem to increase the pressure above the standard 900 (the ranges are (900-1200-1500). I tried all extension rods that were included in the package (and thus different stretched states), but when I twist the screws the three pressure indicators do not change, the only thing that happens is that eventually the extender part become de-attached. The extender is not broken, because I bought 2 extenders and both give me the same problem.

I have read the information and watched video’s on have to wear an extender and how to apply pressure, but as I described this just does not work. I hope someone can identify the missing link, the thing that I do wrong. Advice would be greatly appreciated!

Doyouevenpe

I suspect you are not getting any real tension with your set up. What I found with extenders is that you have to manually prestretch (and compress the extender springs by pushing the extender into your fatpad) before you clamp and start adjusting the threads.

Austfred

Thanks for the reply Austfred! I’ve done what you suggested, but the pressure still does not change. Could the extender, being a 15 euro extender just be of bad quality? (Even though the seller has sold many hundreds). Also, am I supposed to hear clinking sounds?

Does anyone else who posses a pro extender experience the same problems?

Originally Posted by Doyouevenpe
Thanks for the reply Austfred! I’ve done what you suggested, but the pressure still does not change. Could the extender, being a 15 euro extender just be of bad quality? (Even though the seller has sold many hundreds). Also, am I supposed to hear clinking sounds?

Doyouevenpe

The cheap ones work just like the more expensive ones. Experiment using a set of digital kitchen scales. Put the head part on the scales and push down with your hand on the base part. The springs should start compressing and you should get a reading on the scales. That should show you how to read the notches and get a feel for how the extender works. You really need to get some compression before you clamp in.

Austfred

PS Proextender

I used one and they are fine

I moved onto a LeLuv slider type (now sold as a Miracle) which do not have springs and which I find easier to use but I recommend that newbies start out with a spring type so they get an idea of how much tension they are using.

Austfred

So this is the extender I bought: http://www.ebay.nl/itm/Extender-Pro…YF7Qy nuX36oNw

Nothing seems to work, whatever I try, so I’m just gonna throw it away and accept it as a failed purchase. Could you recommend me a reliable stretcher, in the price range 30-70 euro?

Originally Posted by Doyouevenpe
So this is the extender I bought: http://www.ebay.nl/itm/Extender-Pro…YF7Qy nuX36oNw
Nothing seems to work, whatever I try, so I’m just gonna throw it away and accept it as a failed purchase. Could you recommend me a reliable stretcher, in the price range 30-70 euro?

Doyouevenpe

The one I originally bought was a “proextender” made in China which looks the same as yours. It took a bit of getting used to but worked fine. Did you try what I suggested with the kitchen scales and work out how the spring tensioners work? If there is a problem with the springs this should show it up. If you look for a DIY velcro mod you can modify it to make it a bit easier and more comfortable to use but I would get the tensioning with the noose right before I did any mods or thought of buying another extender.

Austfred

I do not have kitchen scales, so I can’t measure the pressure in that way. I did try warming up the springs and I tried all extender rods, but when I twist the traction screws the pressure indicators do not disappear into the extender rod. I don’t know what else I can do.

I just tried on both the extender rods, and when I sit in a certain way the traction moves to 1000-1200. I will wear it his way for the next weeks, and then go from there. This means that when I stand on my feet, the traction is 900mg. But I can live with this for now. Might motivate me to spend more hours on my study!

Originally Posted by Doyouevenpe
I just tried on both the extender rods, and when I sit in a certain way the traction moves to 1000-1200. I will wear it his way for the next weeks, and then go from there. This means that when I stand on my feet, the traction is 900mg. But I can live with this for now. Might motivate me to spend more hours on my study!

Doyouevenpe

This makes me think you are still having issues in fitting your penis in the extender before you you use rge adjusters to tension up. I found you really have to do a manual prestretch before you clamp the headpiece. If you correctly pretension you should be able to get a better control of the proextender.

mc_rolla had a similar issue here Penis extender? ?. It is a fairly lengthy thread but I believe you could find it helpful if you read all 10 pages.

Regards
Austfred

I’ve come across that thread, yes. I always prestretch, but it just doesn’t work. Do you know another good extender for around 50 euro?

I think I bought the same extender as MC_rollah describes in that thread. It is just a cheap extender that does not work, I have broken one already. So right now I just need to buy another extender, for a little higher price. I also find quite some velcro straps for hanging on Ebay, which also interest me. What is your opinion on those?

Originally Posted by Doyouevenpe
I’ve come across that thread, yes. I always prestretch, but it just doesn’t work. Do you know another good extender for around 50 euro?

I am not suggesting you do not prestretch but suspect your technique needs adjusting. It was the one thing I found a bit difficult when I first started. You need to both stretch your penis and compress the springs as you clamp in the head. That way you should have a bit of compression in the extender springs before you start adjusting the screws out to increase the tension. You compress the springs by pushing the extender from the head end with the base moving into your pubic bone (fat pad).

I do not think there is anything wrong with the Proextender as a spring extender with a noose type clamp. You could go for a Miracle slider (check ebay) which does not use springs. Other than that the best ways of getting better is to go for a vacuum head attachment such as the Vacextender or use the DIY velcro strap mod on your proextender.

Originally Posted by Doyouevenpe
I think I bought the same extender as MC_rollah describes in that thread. It is just a cheap extender that does not work, I have broken one already. So right now I just need to buy another extender, for a little higher price. I also find quite some velcro straps for hanging on Ebay, which also interest me. What is your opinion on those?

I did not realise you broke the extender?

Not sure about velcro hanging straps as I have3 not got into hanging yet.

Check the links in post 43 here Penis extender? ? (p. 3) for details of the DIY velcro strap.

Austfred

That Miracle Slider looks interesting, I think I will give it a try. I have another question by the way, maybe you can answer this. Since an extender brings out the inner penis, shouldn’t it increase girth in the majority of people? Most people would agree that it only affects girth in only a few people, but this makes me wonder.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Extender routineLeonidaPenis Enlargement Basics810-20-2014 08:59 AM
Question for Extender usersKlaytonPenis Extenders1107-17-2013 11:40 AM

All times are GMT. The time now is 06:07 PM.