Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

How to Read & Adjust Rod style Traction Devices (X4/Size Genetics/JES/Similar)

Originally Posted by batman_kX8V4Sk

I also have a basic extender with a silicone noose. It’s uncomfortable, but for me that isn’t the problem. I have make the noose very tight to avoid slippage, but that cuts off the circulation too much, so I have to keep checking and removing it to restore circulation. I tried to use foams, but I still have to make the noose very tight. I am stretching between 7.3” and 8”.

I was thinking of taking a peace of silicon sleeve to put between the noose and the shaft in order to enhance the area of contact and simulate the comfort straps of other brands.

Is this a good idea?

What worked for me is that if I allowed my glans to swell up a bit and then attach the noose. The slightly swollen head didn’t slip out of the noose. I also used a wide rubber band and put it around the extender it kept the noose ends from slipping out.

Happy stretching.


Cheers, my starting stats 17-02-2016

BPFL=5.0" (12.7cm) BPEL=7.0" (17.78cm) EG=TBA

FG=4.0" (10.16cm) EG= 4.5" (11.4cm)

Penis etenders

Ciao,a tutti volevo sapere se qualcuno ha usato penis extenders , e se ha ragiunto dei risultati positivi, su dei studi medici dicono che non e possibile allungare il pene. Grazie

My extender has arrived :) tried it tonight for the first, just a 10 min test run. What I notice is although my penis is definitely under tension (there’s an obvious stretch going on when I adjust the rods and they’re almost fully extended) it doesn’t show on the device as being under tension I.e. I’m not reaching the first (900g) line. So I took it as far as I wanted to comfort wise but was under 900g. My plan is to do this for the first week or so before considering adding the small extension rods to increase the actual device tension.

Did anyone else start with zero tension as in not reaching the first line? I want to start off slowly to allow my penis to get used to the whole thing.

Does anyone know where I can buy an traction device that will fit over a 7 inch girth? And no, this is not a joke question. They only seem to sell one size fit all.

Originally Posted by Italian10inch
Does anyone know where I can buy an traction device that will fit over a 7 inch girth? And no, this is not a joke question. They only seem to sell one size fit all.

No.

Literally no, there is no options for yYou.

You have to make something. Another member has made a project out of it but nothing has come of it yet. Until he makes a workaround and posts pics and directions we don’t get to extend. Extreme girth is one of the reasons I don’t extend any more either.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
No.

Literally no, there is no options for yYou.

You have to make something. Another member has made a project out of it but nothing has come of it yet. Until he makes a workaround and posts pics and directions we don’t get to extend. Extreme girth is one of the reasons I don’t extend any more either.

Thanks for the reply. I thought that would be the answer. Sad. Please keep me in mind if there is anything new out there. I know traction works I gained some years ago using it. Just wanted to push one more “half inch” and then I’m done.

Originally Posted by Italian10inch
Thanks for the reply. I thought that would be the answer. Sad. Please keep me in mind if there is anything new out there. I know traction works I gained some years ago using it. Just wanted to push one more “half inch” and then I’m done.

I can say, I used to use the X4 Labs girth base but this was before I hit 7” base girth so…if you find you’ve only recently outgrown the normal bases, the girth base on the X4 Labs edition may suffice for a bit longer. I don’t know what your flaccid base girth (as that’s key here) is but I do recall using this in my extender days and it slipped my mind when you asked this question a week or so ago.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by thoughtfulgold
I can say, I used to use the X4 Labs girth base but this was before I hit 7” base girth so…if you find you’ve only recently outgrown the normal bases, the girth base on the X4 Labs edition may suffice for a bit longer. I don’t know what your flaccid base girth (as that’s key here) is but I do recall using this in my extender days and it slipped my mind when you asked this question a week or so ago.

My flaccid base girth is 7” my hard base girth is around 8” depending how long I stay hard using trimix for erection. But if I’m stretching are you saying 7 inch flaccid is too big for X4 labs? I had a big jump in flaccid girth with trimix. It appears to be stable at 7 inch flaccid but it seems to be continuing to grow in circumference when erect.

Originally Posted by Italian10inch
My flaccid base girth is 7” my hard base girth is around 8” depending how long I stay hard using trimix for erection. But if I’m stretching are you saying 7 inch flaccid is too big for X4 labs? I had a big jump in flaccid girth with trimix. It appears to be stable at 7 inch flaccid but it seems to be continuing to grow in circumference when erect.

If your trimix injection gives you a 7” base girth while flaccid and that is what you’re working with right now, do not buy the X4. It will be a flat waste of your time. I didn’t have a good grasp on exactly what you meant before.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Thanks for the reply. Please keep me in mind if there is a solution.

Hello guys, there’s a video somewhere showing how to adjust the tension? I mean, I have read it all and still I’m not sure if I’m doing it right. I have a sizegenetics extender by the way. Greetings….

Originally Posted by Ra1991
Hello guys, there’s a video somewhere showing how to adjust the tension? I mean, I have read it all and still I’m not sure if I’m doing it right. I have a sizegenetics extender by the way. Greetings….

X4 Labs includes a video and I think it’s been uploaded to YouTube but I think the video is terrible.

I do think if you search it there that several things should come up. There are no extender videos here on Thunders Place.


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

I’ve never fiddled with something more impossible than this fucking piece of shit in my life! I need 4 hands to put the fucking thing on and it has to be so tight it turns my pud purple or just slips out! The foam pieces are useless and are tearing already after a week of fiddling with this thing. Every time I cinch it down it pinches my foreskin enough to make my fucking eyes water! I can’t find a video anywhere of any human being putting this on a real penis. Putting it on a dildo with no fucking skin of course is easy, the videos they show from X4 labs are bullshit. I hate this thing so far! What a waste of money. If I ever do get this thing on without pain there’s zero tension on the fucking thing and I’m wasting my time. Wtf? Help.


Started 5.5 x 4.2 Feb 2015

Current 7.25 x 5.5 - 6.25 Base girth?

Goal 7.75 x 5.75?

I just received my sizegenetics extender yesterday, and I was pretty frustrated as the DVD wouldn’t play on my MAC, and the lack of instruction on the web. There was quite a bit of swearing the first few times I tried it.

After fiddling around a bit, I found for me (and I’m not girthy), the following worked best:
I would get myself hard first.
Then, I would use the foam wrap piece (not sure if yours has it) to place over the shaft just up to the glans.
Then, I use the silicon noose (I don’t think I’d use the noose without the foam).
The trick is you have to compress the gadget down all the way (and my thumbscrews are screwed in all the way), and while holding it down, tug your unit through the noose and pull it tight (being very careful to keep the noose on the foam and not let it slide up to the glans, ouch!).
By this time, you’re not hard, but your glans is big enough to work with the noose and foam.
Then, when it’s comfortably in place, start cranking out the set screws to the desired tension.
It takes some fiddling..

I found the right number of rods (mine comes with several sizes to adapt with). I used it for an hour last night, and then I decided to try it in stealth mode today. I put it on and then pointed it downwards ( I saw this on a video from goodlookinglooser - if I recall correctly), put on a pair of boxers and a loose pair of slacks and drove in to the office. Big mistake - trying to drive any distance with this thing on! I started to feel a pinch around my glans that was progressively getting worse, so I had to take evasive action and undo it halfway to the office. ( I did pull over to do that :) )

Anyway, after I got to the office, I put it back on and did 3 one hour sessions with breaks in between to get the feel for how it works.

If you don’t have the foam and noose just right, you’ll get some pinching on the skin.

I also did notice that I’m not setting the tension past the first notch, but just shy of it, and it seemed enough for me.

That’s all I can say for now. It seems that this is going to be one of those things in my arsenal, that I will have to put up with to get results.

Oh gawd my foreskin got sucked in the eyehole with the noose yesterday lol

I’m starting at 0 tension then after reading all this. Back to the drawing board

Top

All times are GMT. The time now is 12:13 PM.