Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

frenulum problem with Penimaster Pro

12

frenulum problem with Penimaster Pro

Good evening everyone

I bought a Penimaster Pro few months ago and have been able to maintain a consistent routine for a little more than a month, gaining a temporary 0,3 cm in BPEL.

So far so good, then I started to get some liquid retention (I heard it’s normal) e a reddened glans (it can last for days).

I also noticed a progressive frenulum stiffening during the weeks that lead me to a little tear on it, forcing me to stop for two weeks to let it heal.

I wish to say that i followed all the basic guidelines (two lines max of traction force, one hour max sessions, revome all the air from the chamber in order to avoid blisters).

Have you ever faced my same frenulum and glans problem ? how you solved it ?

How you doing? I been using the PMP for about a year now, And my glan also get’s red and sometime’s bruised on the bottom. It goe’s away so it doesn’t bother me. I believe the reason is because your basically sucking your self into it and then pulling it , and because of the pressure it’s almost like giving yourself a hicky. And I haven’t got a blister from it but I have from the pf. I noticed when moisture got in it I started to get one. So maybe make sure there is no moisture in the glan peice. And if I was starting out with it I wouldn’t use tension on the springs right away but slowly work into it. The glan is a sensitive part and needs to be conditioned for it. Hope this helps.

Thanks for the reply 2 short, how much have you gained in one year ?

I barely solved the problem of redness by using the Penimaster without the “balloon” inside, but the tear on the frenulum is back :(

I also tried the chrome modification but the base is just too tight to let me insert and adjust the rubber laces while my penis is on it…

It’s hard to say how much from the PMP. I started out with the Sizegentic then got the pf, which was the biggest waste of money and time. Then I bought the PMP and use it with my Sizegentic. I can tell you this, I don’t do manuals all I do is pump and use the PMP and kegels and I’ve been doing this for almost 3 years I believe. And I put on in length 21/2 inches. So I’m not complaining. I hit a wall were I wasn’t gaining so I took off 3 months and started up again a month ago and I’m getting better stretches now. Think I needed a break. Plus I didn’t give myself rest time and this time around I’m doing 3 days on 1 off. But still pump on off days. It’s weird your cutting yourself are you uncircumcised? If so how do you enter the bulb piece? And do you use the adapters? And go slow working into the tension and make sure it stays moisture free. I feel you have the best stretcher out there super comfortable.

Originally Posted by Exile23
Good evening everyone

I bought a Penimaster Pro few months ago and have been able to maintain a consistent routine for a little more than a month, gaining a temporary 0,3 cm in BPEL.

So far so good, then I started to get some liquid retention (I heard it’s normal) e a reddened glans (it can last for days).

I also noticed a progressive frenulum stiffening during the weeks that lead me to a little tear on it, forcing me to stop for two weeks to let it heal.

I wish to say that i followed all the basic guidelines (two lines max of traction force, one hour max sessions, revome all the air from the chamber in order to avoid blisters).

Have you ever faced my same frenulum and glans problem ? how you solved it ?

There is a type of colored elastic self sticking sports tape (yellow, blue, red, green).

here is one example: https://www.ama … /dp/B06XXY35VJ/

I wrap the junction of the glans and the shaft 1/2" over the glans and 1-1.5" on the shaft.

The extra wrapping prevents pinching and issues with the frenulum and penile skin


Kdong Starting: 7.1 x 5.125 vol = 14.84 cu. in. Current: 7.1BPEL 5.5 MSEG = 17cu. in. GOAL --> 8.5 x 6.5 vol: 28.6 cu. in.

Took Time off, lost some gains-- Girth cemented

No PE since 2015 -- starting back up

By wrapping you can still draw yourself into the chamber? If so , then you put gel on the wrap to slide in?

Originally Posted by 2 short
By wrapping you can still draw yourself into the chamber? If so , then you put gel on the wrap to slide in?

No, I have an X4. Didn’t realize it was a vacuum based extender.

Use condoms?


Kdong Starting: 7.1 x 5.125 vol = 14.84 cu. in. Current: 7.1BPEL 5.5 MSEG = 17cu. in. GOAL --> 8.5 x 6.5 vol: 28.6 cu. in.

Took Time off, lost some gains-- Girth cemented

No PE since 2015 -- starting back up

Hi,

How do use get in the glans chamber?
Vacuum pump or hose?

I had the problem where with one ball pump was not getting all the way in, this led to my glans paining after sessions.
Then I started t and 1/2 pump, which solved the prob, off PMP because got a blister from BM.

Was thinking of getting PF for night use.

I use the hose. The pump I did not like at all. The hose makes it a lot easier to get in.

Hi everyone, sorry for the long absence!

I kinda found a way to use the PMP without meeting the frenulum problem (or maybe it’s because now it looks a bit more stretched).
Anyway I wear it without using the diaphragm, just the sluice.
It’s nice and comfortable, with no pain, no reddening, no blisters, just a bit of fluid retention.

2 short: Wow man, you made some incredible gains ! It’s basically my final goal ! Now I wanna know everything about your extender routine, and the kegels one too ! :D

Originally Posted by 2 short
It’s hard to say how much from the PMP. I started out with the Sizegentic then got the pf, which was the biggest waste of money and time. Then I bought the PMP and use it with my Sizegentic. I can tell you this, I don’t do manuals all I do is pump and use the PMP and kegels and I’ve been doing this for almost 3 years I believe. And I put on in length 21/2 inches. So I’m not complaining. I hit a wall were I wasn’t gaining so I took off 3 months and started up again a month ago and I’m getting better stretches now. Think I needed a break. Plus I didn’t give myself rest time and this time around I’m doing 3 days on 1 off. But still pump on off days. It’s weird your cutting yourself are you uncircumcised? If so how do you enter the bulb piece? And do you use the adapters? And go slow working into the tension and make sure it stays moisture free. I feel you have the best stretcher out there super comfortable.

I also bought the pf and really regret it. It pulls the skin and gives me edema and that’s basically it. PMP on the other hand grips penis inner structures and gives a good stretch.

I’ve had the same problem with getting a cut on my frenelum with the PMP. I haven’t figured out how to solve it completely but there’s a trick I use that prevents it from happening as often if you’re uncircumcised as detailed below:
-As mentioned earlier make sure the latex parts are completely dry.
-Use sufficient lubrication on the latex parts
-Press the head into the sluice before sucking it and use your foreskin to create an airtight seal
-You apply the suction and the head will slide into the chamber without any extra air getting in as well
-Once the head is securely in you pull as much of your foreskin as you can out of the chamber/sluice (which should be easier to do if you used enough lubricant)

I starting putting the device on this way (albeit sometimes I get a bit lazy with applying lubricant) and for the most part I’ve had significantly less fluid retention and I can wear it for weeks before getting cut on my frenelum again (which takes 3 - 5 days for me to heal).

Originally Posted by cucumbersome
I’ve had the same problem with getting a cut on my frenelum with the PMP. I haven’t figured out how to solve it completely but there’s a trick I use that prevents it from happening as often if you’re uncircumcised as detailed below:
-As mentioned earlier make sure the latex parts are completely dry.
-Use sufficient lubrication on the latex parts
-Press the head into the sluice before sucking it and use your foreskin to create an airtight seal
-You apply the suction and the head will slide into the chamber without any extra air getting in as well
-Once the head is securely in you pull as much of your foreskin as you can out of the chamber/sluice (which should be easier to do if you used enough lubricant)

I starting putting the device on this way (albeit sometimes I get a bit lazy with applying lubricant) and for the most part I’ve had significantly less fluid retention and I can wear it for weeks before getting cut on my frenelum again (which takes 3 - 5 days for me to heal).

The Promaster cream is an adhesive sticky cream. Using lubricant would be counterproductive to the seal/adhesion of the glans chamber.

Originally Posted by srsabpe
The Promaster cream is an adhesive sticky cream. Using lubricant would be counterproductive to the seal/adhesion of the glans chamber.

Ah I see; I’ve been using the cream that comes with the device and I thought it was just a lubricant. Thanks for clarifying

Originally Posted by kdong
There is a type of colored elastic self sticking sports tape (yellow, blue, red, green).

Here is one example: https://www.ama … /dp/B06XXY35VJ/

I wrap the junction of the glans and the shaft 1/2" over the glans and 1-1.5" on the shaft.

The extra wrapping prevents pinching and issues with the frenulum and penile skin


This is a good idea for a regular stretcher!
I gave up on my old one, because those silicone straps were either not tight enough, or *painful* due to chaffing so I couldn’t wear it.

I’ll have to try this.

Top
12
Similar Threads 
ThreadStarterForumRepliesLast Post
Empezando con Penimaster PRO y muchas molestiassnafonerExtensores para Agrandar el Pene2705-15-2018 01:27 AM
Hanging with a Penimaster Pro - 5lb feels intenseMediumtobigPenis Hangers303-29-2016 03:25 PM
Problem with the frenulumneverbackPenis Enlargement Basics701-26-2009 02:44 AM

All times are GMT. The time now is 12:34 AM.