Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Autoextender for the uncut

12

Originally Posted by Ali G
I think the size of one’s glans is more important then being cut, or uncut.


Most probably you are right Ali G!

Unfortunately my glans is not very well developed and I didn’t find a good way to do so. So, I am looking for a device that would work for my, not so well developed, head/glans anyway.

Originally Posted by Juri
Could you explain in more details please, how do you clamp the head of the Autoext and how much of a force do you use! I would like to know also where exactly do you place the head of the Autoext – do you pull the foreskin back (head exposed) or not.


I’ll give it a go Juri, but I’m not the best at explaining things as you know.

I don’t pull the foreskin back no, I might if I could, but this in fact is another project I’ve been working on, not that I’ve managed to make much progress at all. Apart from that, with the underdeveloped glands issues you mentioned, it would seem we have pretty much the same situation going on, so perhaps my solution will indeed help you wear your AutoExt for extensive periods in relative comfort, I do hope so.

1. I dab on a little of the artrosilium gel on the shaft and also on the scrotum where the base of the AutoExt comes into contact with it (this is where I often would have most discomfort in the past, if it’s not one thing it’s the other) then I wrap the first warmed silicon strip fairly tightly, slightly behind the head on the glands leaving a small amount of skin bunched up and follow this with the second strip which I don’t stretch nearly so much, as it’s really just to give a cushion effect and to hold the first one in place.

2. I attach the head of the AutoExt well centered over the strips and use one of the larger coloured bands (I know MonkeyBar said we shouldn’t) to hold it closed while I make a few final adjustments, followed by the elastic band which I have already looped a couple of times as it’s a lot easier to attach like this than it is if you start wrapping it round the hooks.

3. Kegel a little to expand the head of the glands as much as you can (it,s surprising how much it does) and you will find that the extra skin which you left now comes into play and the wrap and the head of the AutoExt should now be clearly resting behind the whole of your glands.

4. I now position the rods into place at a moderate tension, to ensure the head of the AutoEXT doesn’t move at all from it’s current position and crank it up to a comfortable stretch for 5-10 minutes or so, before I crank it as far as I wish to go. Please do this Juri, I read about this somewhere on the JesExtender site as a recommendation for that device and it certainly makes a difference.

I gradually reached the full extent of the shorter of the 3 rod sizes which came with my order and moved on some weeks ago to the middle sized rods and now I am about a centimetre away from needing to switch to the longest set, so clearly I am stretching ever further without any noticeable increase in discomfort, in fact quite the reverse. I have on occasion, just cranked away to see if I could make it to the end of the middle rods and I have, but about half an hour later it just has to come off, so it’s best to take it slowly for sure.

I really do hope this helps Juri and of course if any of this isn’t completely clear to you as you try it out, please let me know straight away and I’ll get back to you practically straight away.

I’m on here nearly all the time and certainly a lot more than Ali G is likely to be :gulp:


Donate to Thunder's Place and help save the daffodils :spin2: , but remember to add an extra 30 cents every time :leftie:

Originally Posted by Juri
Thanks, MRC11114!

I have to read your post at least 2 or 3 more times to grasp the whole idea, but I appreciate your explanation. I have a little bit of problem imagining exactly points 4 and 5. A picture would be great, but I cannot expect everyone to be an expert in computer drawing.

Could you tell me more about how strong your stretch is and if you have any problems with slippage of the attachment over your glands.
I wander also, in case I order the extender, if somebody would knock on my door with the delivery or I would just get the package in my mailbox. Do you remember this small detail of how did you get the extender?

Thanks again for you post!

Hey guys, First I’d like to start off and say sorry for the late response, its just I’ve got this new job, and I’ve started going to the gym, and dieting again, and I haven’t had much time. But regardless, Im here to try and make sense of my techniques. So here we go…….

As for the picture, I actually completed one which explains it perfect but when I try to attach it to a post it doesn’t let me, Im a novice when it comes to attaching files onto threads and what not, but I think it wont let me because the picture is to big. I tried to resize it but it’s not working for me, any info on how to do this would be much appreciated, so that I can get this diagram up ASAP. BTW, im using the basic paint program that comes with Windows XP home edition.

So here is point 4 which you had trouble with and the following re-explanation.

“4. I fold back the top part of the wrap down to about an 1/8 of an inch above the brim of my head this is important. Then I squeeze all the blood from the tip into the shaft so that my head looks deflated of most its blood. Now the 1/8 of an inch part’s edge is what your going to calculate as 1/8 of an inch away from the brim. Edge to brim. When your folding just realize that whatever part was directly touching your head’s skin is now lower and on top of the wrap away from your skin.”

Re-explanation:

Ok. I just re-thought on how I do this process and its pretty much like this. After you have wrapped firmly in the silicone wrap you will only be able to see the very tip of you head and in some cases depending on your size you prolly wont see it. Now, you take the wrap from that top near the tip of the head and start folding it back(pulling back towards shaft and lying on top of existing wrap) towards that base whilst holding the end of the wrap with thumb and index-finger. From this point you’ll notice that its easy to fold it back and move onto different area’s to finish folding back the silicone due to the elasticity of that wrap. Just make sure you don’t fold that wrap past that brim of your head you want to have the folded part about 1/16-1/18 above the brim, now for me I notice that the underside of my head’s brim is sometimes exposed but I’ve realized this causes no discomfort during my session. When your finished the end product is gong to be one part of the silicone wrap folded back about half way onto the other part of the wrap. Creating a thicker section and a not so thick section.

Point 5 followed by re-explanation:

“5. Now, I apply the head piece to the stretching bars and pull with one hand my wrap and my whole head up and away together and apply the head piece’s protruding silicone slots about 1/8-1/2 inch below the brim of my head, I normally try to stretch enough so that the very bottom of the wrap is squeezed between the top of those protruding sections on each side of the head unit.”

Re-explanation:

Now. Once im wrapped I take the auto-extender and insert my wrapped dick through the unit. Pull the wrap by the head and underneath the head part of my dick firmly out(pretty much as much as it can go), close the head piece right on the not so thick part of the silicone wrap, rubber band it up and im done(Monkey designed two protruding silicon slabs one on each side of the head piece you’ll know what it is when you look, this is what lies right on the very end of the thinner part of the silicone wrap). Keep in mind that I push the auto extender into my pubic bone before I close that head piece and once its closed and wrapped I release and get that extra tension provided by the springs. I have the fast-size extender but use the Monkey Bar’s head piece which in my opinion is way better for stretch and for circulation.

So hopefully that explains it a little better. If not I’ll just ask and I’ll try again. Sorry for the misunderstandings I’ve never been good at explaining myself through words. For me a picture is definitely worth a thousand words. LOL.

Good Luck, And let me know if you need further help.

MrC

PS Im pretty sure once you grasp this concept down it’ll work wonders for you and you’ll find that it’s actually a lot easier to do than you might realize.


The key to success in anything in life is CONSISTENCY!- Anthony Ellis

Success comes to those who become success conscious.

Failure comes to those who indifferently allow themselves to become failure conscious.- Napoleon Hill


Last edited by MRC11114 : 01-22-2006 at .

:thumbs: Thanks MRC lots of 1’s plus 4, those instructions are easier to follow now.

Crikey, if can can follow them, they must be good :gulp:


Donate to Thunder's Place and help save the daffodils :spin2: , but remember to add an extra 30 cents every time :leftie:

Sorry I forgot to mention, but try not to trap blood in the glands before you completely close off the head piece onto your dick. What I do is first wrap then make my folds so that the wrap stays in place securely and comfortably then squeeze any excess blood that I may have trapped in my head. I say this because i notice quicker head coldness when there’s blood trapped in the glands. But when there’s little or no blood trapped in i can wear the device easily for and hour+ before having to recirculate.

On another note to me this wrap is successful because what you create with the silicone wrap by folding back towards the base is extra girth to keep the head unit from slipping off.


The key to success in anything in life is CONSISTENCY!- Anthony Ellis

Success comes to those who become success conscious.

Failure comes to those who indifferently allow themselves to become failure conscious.- Napoleon Hill

Originally Posted by rousseau506
:thumbs: Thanks MRC lots of 1’s plus 4, those instructions are easier to follow now.

Crikey, if can can follow them, they must be good :gulp:

YaaaAy. This is great, i was hoping you guys would be able to figure it out. So give it a go and when you get a chance let me kno how it worked for you.

Thanks,

MrC


The key to success in anything in life is CONSISTENCY!- Anthony Ellis

Success comes to those who become success conscious.

Failure comes to those who indifferently allow themselves to become failure conscious.- Napoleon Hill

Originally Posted by rousseau506
I’ll give it a go Juri, but I’m not the best at explaining things as you know.

I don’t pull the foreskin back no, I might if I could, but this in fact is another project I’ve been working on, not that I’ve managed to make much progress at all. Apart from that, with the underdeveloped glands issues you mentioned, it would seem we have pretty much the same situation going on, so perhaps my solution will indeed help you wear your AutoExt for extensive periods in relative comfort, I do hope so.

1. I dab on a little of the artrosilium gel on the shaft and also on the scrotum where the base of the AutoExt comes into contact with it (this is where I often would have most discomfort in the past, if it’s not one thing it’s the other) then I wrap the first warmed silicon strip fairly tightly, slightly behind the head on the glands leaving a small amount of skin bunched up and follow this with the second strip which I don’t stretch nearly so much, as it’s really just to give a cushion effect and to hold the first one in place.

2. I attach the head of the AutoExt well centered over the strips and use one of the larger coloured bands (I know MonkeyBar said we shouldn’t) to hold it closed while I make a few final adjustments, followed by the elastic band which I have already looped a couple of times as it’s a lot easier to attach like this than it is if you start wrapping it round the hooks.

3. Kegel a little to expand the head of the glands as much as you can (it,s surprising how much it does) and you will find that the extra skin which you left now comes into play and the wrap and the head of the AutoExt should now be clearly resting behind the whole of your glands.

4. I now position the rods into place at a moderate tension, to ensure the head of the AutoEXT doesn’t move at all from it’s current position and crank it up to a comfortable stretch for 5-10 minutes or so, before I crank it as far as I wish to go. Please do this Juri, I read about this somewhere on the JesExtender site as a recommendation for that device and it certainly makes a difference.

I gradually reached the full extent of the shorter of the 3 rod sizes which came with my order and moved on some weeks ago to the middle sized rods and now I am about a centimetre away from needing to switch to the longest set, so clearly I am stretching ever further without any noticeable increase in discomfort, in fact quite the reverse. I have on occasion, just cranked away to see if I could make it to the end of the middle rods and I have, but about half an hour later it just has to come off, so it’s best to take it slowly for sure.

I really do hope this helps Juri and of course if any of this isn’t completely clear to you as you try it out, please let me know straight away and I’ll get back to you practically straight away.
I’m on here nearly all the time and certainly a lot more than Ali G is likely to be :gulp:


Thank you very much rousseau506! Very good explanation!

Thanks, a lot MRC11114!

It makes sense; I think I understand it better now. Once I have the Autoext I will try it!

Hi, rousseau506!

On a second thought, don’t you get too much of a skin stretch, when attaching with the glans covered by the foreskin?
BTW could you estimate the tension you apply to the Autoext – 5 lb, 10 lb or more, before it starts to slip?

Do you have foreskin fluid build-up because of claming with the foreskin covering the glans? I definitely get one, when I use the redi-stretcher or the Bib hanger. Just wander if the Autoext is any different type of device?

Originally Posted by Juri
Hi, rousseau506!

On a second thought, don’t you get too much of a skin stretch, when attaching with the glans covered by the foreskin?


Not really Juri, the skin is stretched of course, but then so is everything else.

Quote

BTW could you estimate the tension you apply to the Autoext – 5 lb, 10 lb or more, before it starts to slip?


Going on my experience with the jes-extender when the tension it gave was approx 3 lb, I would estimate about 5 lb at a guess and certainly I would be surprised if it was any more.

Quote
Do you have foreskin fluid build-up because of clamping with the foreskin covering the glans? I definitely get one, when I use the redi-stretcher or the Bib hanger. Just wonder if the Autoext is any different type of device?


Yes I usually do, when you are limited to wearing the device this particular way it seems unavoidable, but it isn’t a major build up of fluid, in fact it’s barely noticeable and it goes away in practically no time at all.

It isn’t nearly as bad as it used to be with the jes-extender that’s for sure, so I really can’t complain. You might find as others have, that you don’t get any at all.


Donate to Thunder's Place and help save the daffodils :spin2: , but remember to add an extra 30 cents every time :leftie:

No prop Juri, Let me kno how it works out, and if you need any further explination i’ll be glad to assist. Take care and safe stretching.


The key to success in anything in life is CONSISTENCY!- Anthony Ellis

Success comes to those who become success conscious.

Failure comes to those who indifferently allow themselves to become failure conscious.- Napoleon Hill

Top
12

All times are GMT. The time now is 06:11 PM.