Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

The Tunica Buster

123

The Tunica Buster

Ok First, let me just get the WARNING out of the way. If you choose to build, and use one of these and rip your dick off…your a dumb ass. So please be VERY careful and DON’T blame me or Thunders Place. ;-)

So I am amazed at the length that I will go to to get a bigger dick. This “invention” of mine is the result of this. I wanted to find a way to get a great stretch, that didn’t kill my hands and forearms, that could be done with a minimal amount of time, and actually worked. I call it the Tunica Buster. However…this thing also stretches the ligs like nothing I have ever tried before. So if you want to come up with a better name for it, go for it.

I don’t have a lot of time right now, and because of recent schedule changes I will not have a lot of time to stay on top of this thread. I will do my best tho. So I am hoping that a picture is worth a 1,000 words. I am posting several pics. Everything that you see was bought at Lowe’s for about $30. Well everything but the Bib. You will need a drill and some simple tools to build this.

Basically this thing uses the leverage of the long arms and a fulcrum at the end to give you the most intense stretch humanly possible. And believe it or not, this little torture device is actually pretty comfortable. I use a Bib as the attachment device, but you could probably use something else too. Wrap like you normally would when you hang with a Bib, put your dick through the hole in the base plate, and then attach the Bib. At that point all you need to do is pull the arm to, or away from you, and stretch. Then give it a quarter of a turn to work the side and repeat. Another quarter of a turn and repeat. Do this all the way around hitting all sides of your penis.

This whole thing is adjustable. So when your done doing a complete rotation, move the inside swing arm up one notch. Notice the holes in the arms? They are placed about a half an inch apart. When you are done doing another rotation, move the swing arm up again. You can work your shaft in half inch segments all the way up. You can also change all the angles by moving the outside swing arm forward or back. The possibilities are endless. Also, the top piece that the Bib attaches to can be moved in just a second. So you can completely control the intensity and angle of the fulcrum. I have only used this a few times now, but I can say that when I was done…my dick fell out of the hanger and thanked me. So I can’t speak for results, or even give a good opinion on what kind of routine to use with this yet. I have been doing about 20 minutes tho.

The outside swing arm is 13 inches long. The inside swing arm is 9 1/2 inches long. If your any longer than me, I would make the outside swing arms longer. The width of the outside swing arm is 4 3/4 inches. The width of the inside swing are is a little more than 3 1/2 inches. It has to be wide enough to accommodate the Bib. The arms are flexible. So all I have to do to move the inside swing arm up or down is squeeze the arms together, then move them to the next hole and release. Very simple and easy to use.

I hope this description helps. I apologize as I am just not a very good writer. Again I hope the pics help. If you build and use this, let me know how it goes. I’m sure that many of you could build a much better one. And again…I stick to the warning above. This thing can be EXTREMELY intense. It is NOT meant for newbies!!! Please be very careful. Let me know what you guys think.

DLM4
:-)

Attached Images
1.jpg
(22.3 KB, 997 views)
2.jpg
(21.5 KB, 691 views)
3.jpg
(27.0 KB, 635 views)
4.jpg
(23.3 KB, 630 views)
5.jpg
(26.7 KB, 735 views)

More Pics…

Attached Images
6.jpg
(26.6 KB, 542 views)
7.jpg
(28.2 KB, 494 views)
8.jpg
(22.9 KB, 506 views)
9.jpg
(21.1 KB, 643 views)

Your a clever nut job aren’t you :D . I have to ask to you play with legos when you were a young lad?


I haven't failed, I've found 10,000 ways that don't work. Thomas Edison (1847-1931)

I guess I picked a bad day to sell my erector set. :)

Seriously though, very clever idea for using a Bib hanger as a stretching device.


The primary goal of PE should be to make your penis as healthy as possible in both form and function. If you do that, increased size will follow.

No, I played with the “Erector” Set. (pun intended:-) Remember those? Seriously tho…In 20 minutes of stretching with this, I am more fatigued then when I hang for 2 hours.

Great idea!


Present: 8.75" BPEL, 9.25" BPSFL, 5.3" EG

Goal: 1' BPEL, 6.5" EG

I’ve been working on something very similar. Great idea.


Then 01/15/08 EBPL: 6.25 EG 5.10 Now 10/05/09 EBPL 7.75 EG 5.25 Girth work for 103 days.

New Short Term Goal: EBPL 8.0 EG 5.5 Lifetime goal 9x6.5 PE log and journal

Looks interesting. Are you using silicone sleeve as a wrap or to add some padding?

look good and usefull


inicio 07/09 NBP 14 x 13 -- 05/10 NBP 15 x 14

El guerrero de la luz sabe que la batalla mas importante es contra si mismo.

Fotos 1 - Fotos 2

Originally Posted by mister007
Looks interesting. Are you using silicone sleeve as a wrap or to add some padding?

I use it as padding. Turns out the Bib Hardcore was just a bit too hardcore for me. Adding the silicone was perfect. I was wondering how long it would take someone to ask me about that. :-)

The nice thing about this contraption is that its so easy on your hands and forearms. When I would stretch before I would get more fatigue in my hands then I did in my dick. And the nice thing is that every stretch is done with a fulcrum. So its like doing A and V stretches. Also, doing twisted stretches is incredibly easy and effective.

I also am a very hard gainer. I really haven’t gained much in over a year of pretty much solid PE. Even with all the hanging I have been doing. So I wanted to find something that might break the plateau I have been on. I think that this might be it. Its gives the most intense stretch possible. With this much pressure I would think that injuries are a real possibility, and that you would really have to be careful. However, so far I have been lucky with no injuries aside from minor skin irritation that we all get from using a Bib for hanging.

Hmm. I wonder. Probably would work decently with a home-made vacuum hanger/stretcher attachment head. No?

Also on those swing arms, if you change your design just a bit and sketch out ahead of time, staggering the drill holes in a sort of zig-zag pattern should easily allow the change of the stretcher’s arm length. Allowing for 1/4” staggered adjustments instead of the 1/2” you have now, while still retaining overall structural integrity or strength of those arms.

To avoid splinters, it’d be a good idea to cover the base in felt or rubber, or use a solid board and sand it down till it’s very smooth.

Ah! Upon closer inspection I see how you used a swivel clip/hook. Was wondering how you might have and if you did allow for rotation.

Wonder if the Power Jelqer could be used in conjunction with this and if it’d have any benefit.


Last edited by Milas : 10-28-2009 at . Reason: Forgot to mention 1/4" instead of 1/2"

I don’t think that a vac would really work. My main PE is Vac hanging and I just don’t think that a vac could take the kind of pressures that are being used with this. I like your other ideas tho. As I built it the design had changed several time as it was a work in progress. Initially I had designed it to have two rollers. One on each side of your dick. Just to help cut down on time. That way you could just pull forward for a set, then backward for a set. This could still be done, but what I found is that it changed the angles too much and made it difficult. So I just went back to the one roller/fulcrum design.

Originally Posted by dlm4
I don’t think that a vac would really work. My main PE is Vac hanging and I just don’t think that a vac could take the kind of pressures that are being used with this. I like your other ideas tho. As I built it the design had changed several time as it was a work in progress. Initially I had designed it to have two rollers. One on each side of your dick. Just to help cut down on time. That way you could just pull forward for a set, then backward for a set. This could still be done, but what I found is that it changed the angles too much and made it difficult. So I just went back to the one roller/fulcrum design.


(Realized the following is kinda useless, but part of it is still relevant. Till the wait a second part.)

Ah-ha! You just gave me an idea for a solution as to how to have an effective yet not bulky way for fulcrum stretching at different points along the length. That is so the entire length gets a good bending and stretching out. If you build a new model, considering this your prototype, and drill accurately the staggered 1/4” hole points without a wide margin of error. A small dual roller piece can be attached and adjusted as needed up and down throughout the stretching process. Easily shifted if one set of two pins/rods/bolts is short and the other is long. This will allow you to insert the longer pins first, and then lock it into position temporarily by pushing the short pins into position through the opposite holes. Using two pins will make it stable in where it’s locked in. Also if cut to length to be flush with the outside of the rails, a simple magnet could be placed on the outside on the long pins side to prevent slippage if that’s a concern.

Hell, it should be simple achieve the same effect with a straight single roller using two pins again to lock in place, or just one straight pin through the roller as long as there’s enough give in the stretched penis to move into positions. Kinda like a kitchen rolling pin.

As for the vac part, I guess you’re going for an extreme stretching out with this device. Hm. Will have to figure out how I’d attach myself to such a device as I have not done heavy hanging yet. Got a few ideas though. In the event that I copy your initial design, I’ll incorporate my own ideas into the thing and try to build with with somewhat simple disassembly in mind. Having moved back home to my folks place, subtlety is in mind!

If you need me to, whenever I find some real free time I’ll draw up what I mean about the dual pin roller set up.

Oh, perhaps consider a before and after stretching photo of yourself? Or a measure of just how effective the device in measurement of simple hand-held straight out stretching versus after the use of this device the maximum stretch you’ve achieved.

Oh a new name: The Dongomatic Super Stretcher!

Wait a second. I’m exhausted, just realized placing that roller piece in on the same bars as the support lengths for the stretcher is useless. :confused: Sleep depraved I am! |(
Well. Perhaps just a straight up (pair of) bar(s) on either side then or something; or separate bars just for the bend rollers inside, between the stretcher arms.

I do gotta say I like the name. Let me know if you build one of these and how it works for you.

Top
123
Similar Threads 
ThreadStarterForumRepliesLast Post
Stretching the TunicamassappealPenis Enlargement4005-24-2017 12:08 AM
Targeting the TunicaIguanaPenis Enlargement901-09-2015 09:51 PM
TunicabigtlittledPenis Enlargement Basics1311-15-2011 02:14 PM
Some technical/anatomical info on the tunicaebon00Penis Enlargement207-24-2003 10:51 AM

All times are GMT. The time now is 10:55 PM.