Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

HTW: its a wrap

Originally Posted by sparkyx
I know its possible, I just too lazy to put in 10 yrs to achieve it.


Quite understandable. It could take someone else much less than 10 years, I don’t know.

In any case, I do hope you’ll try the CC+HTW combo. It solves the problem you referred to and is, IMO, far superior to any PE weights+wrap configuration imaginable.

Just drink the kool-aid sparky, you’ll love it :)


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Thanks for the feedback Tigg. And welcome to Thunder’s Place! You’ll find everything that you need to grow the dick of your dreams here. You’ve already found one of the most valuable tools in my PE arsenal. Do try to find the model hair tie I recommend…I did a lot of trialing to identify the best model…take advantage of that trialing and get the best.


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Are these sold on any websites?

Originally Posted by Trunk3284321

Are these sold on any websites?

Yes.


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

I’ve been using these for some time now, two layers for clamping, and 2-3 layers under an Ace wrist bandage, which is a perfect fit for my ADS zinc anode. Comfortable for as long as you want to hang 2 1/2 lbs. Then I just leave an HTW on that extends past the glans tip all the time and go sans underwear. It eliminates glans/trouser interface irritation and keeps the slithery snake from turtling. There is also an expansion effect that keeps a pumped look if that is important.

Slezak


Start: 5/3/05 BPFL: 5.00" FG: 3.75" BPEL: 6.25" EG: 4.75" BPFSL: 7.00"

6/21/06 6.00 4.65 8.25" 5.50" 8.80"

9/21/07 6.25" 4.75" 8.25" 5.65" 9.20"

I found these at walgreens product# 16255-a for the girthier guys and product# 17276-a for the smaller girth (like me) guys. Will try tonight and let you all know. Using the wench and a stretcher I got off ebay.

Any updates Tiny? I just got back from Walgreens and I have to say that the 2 head bands you mentioned seem to be only for the really small guys or really large guys that are 6”+ in girth. I looked around for those other head bands mentioned in the first post and so far I’ve had no luck at all.

SWW007


The only dumb question, is the question not asked. Goals: 7" Long not bone pressed 6" Girth

I ordered the original Scunci model 17906-A from Monty and I waiting for them to arrive. In the mean time I found the Goody 32109’s, the Scunci 22087-A’s (neon), and have been experimenting with both.

I don’t hang or clamp but I’ve been using the 32109’s as part of an ADS contraption.

Items required
Goody 32109 Headbands or Scunci 17906-A / 22087-A HB’s (Thanks xenolith)
2-3 Homedics Thera P magnetic therapy wrist wraps. (Thanks peforeal)

• I cut the HB on both sides of the seam. In other words I remove about ¼” or less.
• I roll the Goody 32109 Headband (HB) like a condom and leave about 4” loose. The amount you leave loose depends on the size of your glans.
• Then I roll the remaining 4” into a smaller condom roll.
• I warm up for about 5 minutes with a rice sock (Flax seed) I got a Wal-Mart called a “Bed Buddy”.
• I stretch the bigger of the 2 rolls and insert my glans.
• I grab my glans through the material and unroll the HB as far as I can into my fat pad. It is OK if there is still a condom roll at the end in the fat pad.
• I then stretch out and pull my glans through the 2nd condom roll so that is exposed.
• I start wrapping the Wrist Wraps (WW) as close as I can to the base of my penis.
• When I put the first one on I stretch out by pulling on the glans and I slide the WW as far into the fat pad as I can. This will butt right up against the condom roll.
• I repeat this with the second WW.
• On some occasions (especially after Jelqing or stretching) I apply a third WW. With the Third WW I have to remain fairly sedentary (I.e. Reading up at Thunders) so my glans doesn’t turtle into the second condom roll.

Warning: This gives you an obscene bulge that might not be fit for public.

I go to bed at night with the HB and 2 WW’s on and rarely slip out. Depending on how tight you put on the condom roll at the glans you can even urinate with this stretcher on.

Three WW’s are a real stretch and I’ve order the PE weights from Monty and plan to incorporate them into this ADS.

Before I found Xenolith’s thread on the HTW’s I could only wear one WW. If I put on a second my foreskin would roll up on the glans and I would turtle at least a 1”. These HTW’s / HB’s provide the perfect grip. I’m cut but I’ve started restoring recently (might as well do something with this extra PE skin).

I prefer the Goody 32109’s for this ADS, but I haven’t tried the original 17906-A’s yet. I have the 22087-A’s which might be the neon version of the 17906-A’s

Once again, thanks Xenolith this is exactly what I needed to keep from turtling.

Regards,
MagnumMan

Great post MagnumMan. Thanks for your kind words. I’m not absolutely sure that I’ve tried the 22087-A model, but I did try at least 2 scunci neon models and found them both too be less elastic than the 17906-A. Not as good basically. I’m sorry that you couldn’t find the real deal locally, but I’m glad Monty’s there to provide them in that instance.

Word to Monty…please do me and the Forum a favor, once you reach $100 worth of HTW sales, donate $10 to Thunder’s Place. Repeat. Thanks.

Regarding your custom ADS, don’t let Slack know you’re referring to it as an ADS, I’m still a little fuzzy on it, but I think it’s something that he’d refer to as a traction wrap, which according to him, isn’t an ADS. I really don’t know. Or care. But anyhoo, just so you know. If you could, it’d be nice to rig up a banana with your contraption, whatever it is, and post a pic or two. I’m sure guys would benefit from it…a picture being worth a 1000 words and all.

Again, thanks for the kind words and thanks for sharing your experience on the Forum.


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Xenolith,

I’m not sure about the whole traction wrap vs. ADS either. I asked Monty about it in a PM before and he wasn’t total sure either.

I think I have a few items I can rig up and post photo’s. I need to read up on how to do it properly first, plus I need to get rid of the family so it might be a day or 2 before I can get it done. Everyone out of school and on vacation is really cramping my PE schedule.

Thanks again for the HTW idea,
MagnumMan

Originally Posted by MagnumMan

I think I have a few items I can rig up and post photo’s. I need to read up on how to do it properly first, plus I need to get rid of the family so it might be a day or 2 before I can get it done.

It’d be great if you could. PM me if I can help.

Originally Posted by MagnumMan

Everyone out of school and on vacation is really cramping my PE schedule.

:)


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Just want to make sure Monty and the Forum see this. I’ve PM’d this request to him also.

Originally Posted by xenolith

Word to Monty…please do me and the Forum a favor, once you reach $100 worth of HTW sales, donate $10 to Thunder’s Place. Repeat. Ad infinitum. Thanks.


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Sure, at the rate things are going that might take another year, but whatever. As you may notice I contribute.


09-2003 BPEL:6.0x5.5

11-2004 BPEL:8.25x6.25 . . 9+ by Spring is the goal AIR CLAMP

Now BPEL:8 5/8 x 6 5/8 PE Weights

Cool. Thanks.


originally: 6.5" BPEL x 5.0" EG (ms); currently: 9.825" BPEL x 6.825" EG (ms)

Hidden details: Finding xeno: a penis tale; Some photos: Tiger

Tell me, o monks; what cannot be achieved through efforts. - Siddhartha Gautama

Top

All times are GMT. The time now is 04:19 PM.