Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

DLD Bends for incredible Girth Gains

DLD Bends for incredible Girth Gains

This is a repost of the DLD Bend. I could not find the other thread and I a few people were asking about this exercise.

Basically the illustration show the exercise. Gandolf also made a video of the exercise. What you want to do here is this:

Get 100% erect.
Grab penis at extreme base and with other hand grab just under the glan.
Now in a slightly bend the penis in a rolling motion to the space between your hands. This can be done in different directions. For an added punch I like to set up the exercise then compress my hands together slightly ahen engage in the rolling bend.

http://www.mygreenpoint.com/jenn/DLDHorseshoe.jpg

This is an extremely dangerous exersize and should be done by experienced PE'ers that understand the risks and their own limits. I belive there is a very fine line between injury and gain, learning this limit comes with PE experience.


Link to the DLD Blasters Soon to be Triple

Do you only bend down or sometimes down sometimes up?

Also I never post, but since I am now a big thanks for all your contributions to here and the other forum that started at ezboard. I can’t get in there anymore, no idea why and I asked them for a new password several times, but this place is great, in large part due to your input.

Thanks again.

How many time do you do it ?

Quote
Originally posted by jacques
Do you only bend down or sometimes down sometimes up?
Also I never post, but since I am now a big thanks for all your contributions to here and the other forum that started at ezboard. I can't get in there anymore, no idea why and I asked them for a new password several times, but this place is great, in large part due to your input.
Thanks again.

Thanks for the kind words I appreciate that very much. I have always bent down and rolled in that motion. I have tried upward, it seemed akward to me so I stick with the downward to the center, left and right.

Quote
Originally posted by Fattire
How many time do you do it ?

Hey Fattire, I superset these at every 100 jelqs. I will do a 30 second rep followed by a 30 second uli then continue with the next 100 jelqs. My jelqing session now runs from 700 - 1000 jelqs so my total bends would end up being from 7-10 30 second bends. SOmetimes if I have alot of time on a Saturday I may just do an extended session of just bends for an hour or 2. This ussually requires a few days rest.


Link to the DLD Blasters Soon to be Triple

Bud, who does all your artwork?

The A-stretch, Dual Fulcrum, and the Horseshoe all have a cool, distinctive look to them. I am actually intrigued.

Anyhow, I have a slight upcurve. Gandolf’s video shows him doing the DLD Bend in an upwards manner, which I think I can hack. But the thought of trying to do the downward bend as shown in your image kind of… well, EEEK!! I think my lig would shred.

-BH

I still can’t get that “rolling” motion down. If I’m 100% erect, it really ain’t happening. I can do it when I’m like 90% hard, but then I don’t think that it’s effective then.

I’ve been trying this: Horse squeeze, while I hold the squeeze I lightly bend or “rock” my penis back and forth (I guess that would be my retarded version of your “rolling” motion), up and down… then I’ll release the pressure from the hand that’s squeezing the head and slowly let the blood flow back into the head, blowing it up, then slowly squeeze back down on it and repeat the squeeze. How does that sound? I only just started experimenting with this, so I don’t know if it’ll do anything just yet. Any expert opinions?


Becoming.... Godsize

Quote
Originally posted by BusterHymes
Bud, who does all your artwork?

The A-stretch, Dual Fulcrum, and the Horseshoe all have a cool, distinctive look to them. I am actually intrigued.

I do my art and I appreciate your intrigued state! The graphics for the site are beautiful. I spent alot of time on them and they look medical quality. As far as your style of bend, use the direction that is most suited for you.

Quote
Originally posted by Prickle
I still can't get that “rolling” motion down. If I'm 100% erect, it really ain't happening. I can do it when I'm like 90% hard, but then I don't think that it's effective then.

I've been trying this: Horse squeeze, while I hold the squeeze I lightly bend or “rock” my penis back and forth (I guess that would be my retarded version of your “rolling” motion), up and down… then I'll release the pressure from the hand that's squeezing the head and slowly let the blood flow back into the head, blowing it up, then slowly squeeze back down on it and repeat the squeeze. How does that sound? I only just started experimenting with this, so I don't know if it'll do anything just yet. Any expert opinions?

Prickle first the 90% versus 100% is fine and you are getting alot out of it. Over time the rolling motion for me became easier and easier as I got longer. As I got longer I was able to bend at higher erection levels.

As far as your squeeze in concerned it sounds good and I will try it myself. I am a huge fan of squeezes and I think if they are supersetted into a jelq. session the results are a much greater yield.


Link to the DLD Blasters Soon to be Triple

it just ain't fair, I tell ya..

Your own art - well, you are a talented dude!

I’d like to suggest a graphic for your site - make some fake elephant ears and tape them to the base of your groin. Then have Jenn offer up some peanuts in her hand to your ‘trunk’.

Gotta admit - that would be a real site promoter!

Anyways, your artwork is very distinctive. I quite like it.

PE content - I will definitely be working on these bends..

-BH

DLD Bends

DLD I tried your exercise last night. I could not even get a slight bend when my unit was completely erect. Not sure if that is a bad thing either. Not to come off like a wise ass but it would make sense to me that if someone performed this exercise while completely engorged that they would have serious risk of ripping their tunica and possibly causing peryonies disease. Many people who do rupture the tunica do it because of a sharp bend similar to this one while engaged in sex. Why would this method be any different . May because it is a gradual pressure? Maybe some people are more elastic down there then others? It just seems like a really dangerous exercise. How much pressure would you say you use to get your to bend and how erect are you ? I am really curious because people seem to be getting great results and it almost seems like this exercise goes against all that many have been taught in regards to the anatomy of the penis and the forces it can withstand, I hope I do not come off as a doubter . I am just one man trying to be more enlightened to help him with his quest for greater size.

PEace

Quote
Originally posted by jman
DLD Bends

DLD I tried your exercise last night. I could not even get a slight bend when my unit was completely erect.

This is ok and in your case I would perform them as Gandolf does at 80%. Over time the exercise will become easier to do at denser erection levels.

Quote
Originally posted by jman
Why would this method be any different .

You are not bending your penis to that level. The bend is ever so slight to create pressure along the corpus cavernosum. The idea is not to see how far you can bend your penis the goal is to create an even pressure along a specific and direct area of the shaft and roll this along that plain.

This is an extremely dangerous exersize and should be done by experienced PE’ers that understand the risks and their own limits. I belive there is a very fine line between injury and gain, learning this limit comes with PE experience.


Link to the DLD Blasters Soon to be Triple

Dont the risks far outweight the rewards for this exercise?? I mean these are “Erect Bends” right??

What are these supposed to do anyway? girth or length?


"The world is a one way mirror. What they see, is what you see. What do you want people to see?" Women. If you're going to swing...swing for the fucking fences. "The reasonable man insists on adapting to the world. The unreasonable man persists on having the world adapt to him. Therefore, all progress in the world is made by the unreasonable man." "Success is not a surprise."

I think merits repeating.

This is an extremely dangerous exersize and should be done by experienced PE'ers that understand the risks and their own limits. I belive there is a very fine line between injury and gain, learning this limit comes with PE experience.


Penis Enlargement Forum -- How To Jelq -- Free Penis Enlargement Videos

Make a Donation This place runs on donations, help out if you can. Thanks.

Some of us may know that bends work (I don’t…)

But does anybody know why they work? What is it that bending does to increase girth? I haven’t really incorporated them into my plan. I’m reluctant since I tried horses for a while and got nothing. I know bends are different, but does anyone know why doing them increases shaft girth?


Becoming.... Godsize

Quote
Originally posted by Prickle
Some of us may know that bends work (I don't…)

But does anybody know why they work? What is it that bending does to increase girth? I haven't really incorporated them into my plan. I'm reluctant since I tried horses for a while and got nothing. I know bends are different, but does anyone know why doing them increases shaft girth?

Theres a method to my madness:D

When I am looking at developing a new exercise I try to think very much outside the box. I like to read as much information on relative or not so relative issues when I am at the stage of development. I also like to exhaust every possible avenue of science within the relative areas. For instance when I was working on the Blasters there was other science at work in creating the method of stretch. I spend a great deal of time educating myself on simple machines. The A-Stretch is based on a lever and wedge. The Budled stretch is based on a screw mechanism. When I started looking at PE outside of PE I started to see some things in a different way.

The DLD Bend roots are based on this and other articles similar to this.

The Growth Response of the Stems of Genetically Modified Tobacco Plants
(Nicotiana tabacum ` Samsun’) to Flexural Stimulation
D. G. HEPWORTH and J. F. V. VI NCENT
Centre for Biomimetics, 1 Earley Gate, The University of Reading, Reading RG6 6AT, UK
Received: 27 May 1998 Returned for revision : 21 August 1998 Accepted: 15 September 1998
Genetically modified tobacco plants (Nicotiana tabacum ` Samsun’) with antisense cinnamyl alcohol dehydrogenase DNA, produce secondary xylem of a reduced tensile stiffness. These plants were grown alongside control plants. The stems of the plants were flexed or protected from flexing over a period of several weeks. The tensile moduli and second moments of areas of the different tissues inside the stems were measured and used to calculate the bending stiffness of the plants. In tobacco, the cylinder of xylem was found to be the most important tissue in determining the bending stiffness of the plants. The thickness of the xylem tissue cylinder increased when plants were subjected to flexural stimulation. This increased the bending stiffness of the stems. The response to mechanical stimulation was found to be correlated with tissue strain and the genetically modified plants were able to exactly compensate for the reduced modulus of their xylem tissue by increasing the thickness of the xylem tissue cylinder more than in control plants.
# 1999 Annals of Botany Company


Link to the DLD Blasters Soon to be Triple

Thanks DLD for the scientific results on plant experimentation that inspired your DLD BENDS. Being in the sciences field, I appreciate the connection.

Peforeal

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
Losing girth from length gainsmike5150Penis Enlargement Basics403-30-2011 01:13 AM
My PE Journey: Gains, Workouts, TipswadzillaPenis Enlargement3406-15-2010 03:00 AM
Packing may contribute to girth gains.JambazPenis Pumps905-09-2007 09:08 PM
Girth fatigue - must have for girth gainsjukePenis Enlargement1510-10-2005 09:21 PM

All times are GMT. The time now is 04:38 AM.