Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Cock Coil ADS

Well I’m not an expert but it has gone off without a hitch. I use two hair ties and I’ve been contemplating if I even need the second one. I definitely start to feel a small soreness after the 8 hour mark. At work I’m in my feet and moving around all day so it’s getting lots of pull.

I was wondering if you have posted a pic of your setup with two HTW. I’ve seen the one with 2 cock coils and that’s amazing, I don’t know how you would fit two over it. I’ve contemplated two with one chick coil over the first one but will have to try that at home first. At any rate I usually use 2 PE weights which with 13.4 oz and the cock coil weighs 1 lb 1 oz so I’m getting a little more weight and I think only 1 to 2 lbs would be needed.


My MaxVac Setup Longerstretch's Golf Weight and HTW setup My Log

Starting Size: circa 2003: 5 BPEL x 5.0 MSEG August 2007: 6 2/3 BPEL x 5.5 MSEG 04/22/08: 7.5 BPEL x 5.6 MSEG... On and Off again for a while... 11/25/13: 7.75 BPEL x 5.75 MSEG 08/01/19 BPEL 8.03 x 5.6 10/01/19 BPEL 8.19 x 5.6

Originally Posted by xenolith
Ahhh, it was cheaper; there’s the truth. Without a basis for your thinking heat shrink will crack, your thinking amounts to faith.. My empirical evidence of it not cracking should be considered closer to the fact. And think about it, what does heat shrink tubing do? It provides electrical isolation by mechanical means.don’t you think that the main design criteria for heat shrink tubing would be to be durable.. In order to provide that mechanical isolation.. For a long period of time? Yea, me too.

I encourage you to spring the cash for a tube of heat shrink tubing.. I really did try all sorts of coverings and heat shrink tubing was far and away the best from many standpoints.. Recall that the Buddha reminds us: “The wise learn from their experience, the wiser still from the experience of others”.

The more time you’re not sitting, the better the CC works; your job falls within the better half of the spectrum.

Good Luck!

Xeno

Helo Xenolith,

Been awhile since I have posted on the forum,
I have been on and off of PE for a few months, but back at it again.
I was doing hanging weights but my schedule now does not permit me to do it as much as I would like.
So I switched back to using Lead Coils.
I was able to find Heat Shrink tubing for about $3.50( at a Electrical Wholesaler, the first time they quoted me $49.00 for thick wall Heat shrink) for a length as well as Solid Lead 1/4 wire at Canadian Tire for $7.99.
The first time I used 1/4 Lead wire, but I did not realize that it was a hollow center, after using it for a couple of months the Hollow lead kept breaking off due to constantly twisting and shaping.
The second time I made up the Lead Coils, I used 1/4 Thin wall Heat Shrink Tubing, and Solid 1/4 Lead wire.
The Solid wire I find gives a better fit and hold the strech and form way better than the Hallow Lead wire.
The Heat Shrink Tubing is Great, no sharp burres or cracks,
Taking it on and off is way easier than using the Hollow Lead wire.

Thank you Xenolith for your insight and advice.
If I had to add anything to what you have been posting about Lead Coils is to use Solid Lead wire, as I have found out it is easier to maintain , and the coils holds the strech and form way better, as well as taking it on and off. The hollow lead will work if that is all you can get, but solid is the way to go.

I am back at it using Lead coils to lengthen my penis. Hopefully I can do it to the point where I can make gains.

I made one of the CC using the materials previously posted from Amazon. Wrapped it around a length of wood closet rod to make a perfect circumference. Worked like a charm. To try it, I just slipped it on over one of Autoextender’s weights and silicone sleeves and snugged up the coils. Stayed on all day. Ingenious device! Now I need to go out and get some HTW and try that method. What was the model & brand of that wrap again?

There’s no stealthy way to use this, I just wore my loose jeans and tried that on, looks very obscene like a 6+ inch semi hard.

How do you guys use it?


Start 30/06/2016 - BPEL 13cm MSEG 11,50cm

Now - BPEL 16,20cm MSEG 12,00cm BPFSL 18,00cm BPELIT 18,00cm Clamped BPEL 17,50cm

DREAM! 19cm BPEL 17cm NBPEL 14cm MSEG

Hi everyone,

If anyone gifted/talented enough to make a couple, I would gladly pre-pay purchase them from you with a healthy markup. Please PM me if you are interested. I can put together a dresser from IKEA but that’s the extent of my abilities.

I think somebody was making a similar product, the same guy who did the stealth innerware if I remember right. He posted in this thread a few pages back I think, asking xenolith for his blessing on his business.

But it is really as easy as an IKEA cabinet if you want to go DIY. Buy the lead coil, buy the heat shrink wrap, slide the lead into the heat shrink as you uncoil it, take a lighter to the heat shrink (not directly on it, but under it so the heat is applied), plug the ends with super glue, recoil it around a cylindrical object. That’s it. Takes about 30 minutes.


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Originally Posted by Dvdck
There’s no stealthy way to use this, I just wore my loose jeans and tried that on, looks very obscene like a 6+ inch semi hard.

How do you guys use it?

It can be ridiculous in certain pants. Consider it bulge training for when your flaccid actually grows to that big. And remember unless you’re actually hard and “tenting” your pants, nobody considers it obscene. If they notice at all, they’ll just think you have a big dick.


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

I found the lead available in about any size from places like this.

First place I found, gonna shop around, but if anyone else thinks of doing this I hope it helps.

Hi Xeno.

In this post xenolith - Finding xeno: a penis tale you mention using a cylindrical wrap such as the HTW and not a length of material as a wrap, an ACE bandage is an example of this I am guessing. You go on to say there are many reasons for this. Would you he able to elaborate on this for me please as I am persevering with the HTW with my CC but have found the ACE bandage gives me a much more secure feeling. I understand it is more likely my technique as you have no issue with the wrap. I wonder if it is my lack of girth as I do not fill out the HTW so there is some slack there. My main interest is the difference the 2 wraps would have on the outcome of what we are trying to achieve with the CC. IPR has proven to be a very effective protocol for me but I need to dedicate a few more years to attain my goals. As always your insight is much appreciated.

R


Oct 2011: BPEL 6.38" MSEG 4.72"

March 2017: BPEL 7.4" MSEG 5.25"

June 2018: BPEL 7.5" MSEG 5 3/8"

Hello ,

It been awhile since I last posted, I have been on and off with using the cock coils.

Seems that life gets in the way or work gets in the way .

I am wondering in anyone out there is using 2 lead cock coils ?

For the last year or so that being said more part time than anything, I have used 2 cock coils.

I use 2 hair ties placed on top of each other, the Ist hair tie is full length.

The 2nd hair tie half the length of the first one.

I put the 1st one on and pull it down towards the base of the penis, and leave about a extra inch at the base.

The 2nd hair tie goes over the 1st hair tie and rolled the same way to the base of the penis and same length left there.

I pull the penis though the hair ties by grasping the head with pointer finger and thumb .

Then I make the transition with grasping the penis head with my finger and thumb to grasping the head with the hair ties in between the fingers, thumb and the head of the penis.

Then I have the cock coil ready , I put the hair ties through the cock coil and this part is tricky , you have to slide the coil over the penis and you will have to release the head, once the coil is past the head you have to open up the end of the hair tie and pull your penis through , same as the first step when putting the Hair ties on.

Now you should have the hair ties on the penis and shaft, the lead coil in between the head and base of the penis.

At this point you now have to release the head of the penis and pull the hair tie over the head and now hold in place the hair tie and penis head.

As well as holding the coil back.

Now while you are holding the hair ties in place at the head of the penis, you can now start the wrap the lead cock coil around you shaft of the penis starting just below the head of the penis, and glan.

What I do is start at the head just below the glan, pull outward and start the wrap the coil around until you have the coil wrapped all the way down the length of you penis. It is trial and error to how tight you want the coils, too tight causes pain and almost like a skin burn, as well as coldness and numbness to the head.

Too loose falls off, As well slides off while you are wearing the coil.

Through trial and error , what I find works for me is warming up the lead coils with a hair dryer first, makes it easier to wrap around the penis.

I also stretch the penis and use vasaline or aquafor to moisturizer the skin so when putting on the coil the skin has now elasticity and does not burn or hurt.

I now use 2 lead cock coils in series on my penis, so I put the first one on and when that has ended I start the 2nd one from where the 1st one ended and continue to wrap to the base of the penis.

When I first started I had to double wrap the last 1-2 wraps back toward the top.

Now I can do 2 full cock coils in a row.

Now I can hang as well as get a stretch .

I usually do this for about a 1 hour-2 hours.

Then I take it off and let the circulation and warm up the penis.

I take about 1/2 to 1 hour off.

Then I start the procedure over. I usually hang for about 3-4 hours a day when I can do it.

Before putting the coils on, I stretch the penis, as well as pulling the penis from left to right 50 times with the each hand using the natural arc of the arm and then 50 time up and down, all the while pulling out and stretching the penis.

Just wondering if anyone else is doing this or similar.

Damn, that sounds like a lot of work.

I think you could get a similar effect with less work by sliding a loosened coil down to the base, tightening to the preferred tightness. Then sliding a second coil over the upper shaft, and tightening to the preferred tightness.

I have been able to reach essentially my full BPFSL in this manner, although it’s not very comfortable.


Before 5.5" x 4.1" ///////// Now 7.4" x 4.9"

Hi Bearded Dragon,

You are right you can slide a coil to the base and tighten it toward the top or end of the penis .
Through trial and error , I found out when I slide the 2nd coil in that manner and tighten it where the the glan is, it did not give the stretch as needed.
The problem I had was I had extra coil that had to be wrapped around the top of the penis.
Going from the head to the base, I was able to have the coils better wrapped and was able to get a much better stretch as I was able to physically push the coil against the base and feel the stretch.
I have gotten to the point where it takes about 3-5 minutes to put both coils on.
If the lead coil is stiff, use a blow dryer on the coils for about 2-3 minutes and you will find it easier to put on.

As of today April 17 1018, I took 2 measurements.

Measurement #1-with lead coils on, flaccid penis stretched non bone pressed is 7 1/2 inches.

Measurement #2-with lead coils on, flaccid

Penis stretched bone pressed is 7 3/8 inches.

Great measurement and size bro!

Keep up the good work.


Bpel-7.35" , Mseg-5.39"

Top

All times are GMT. The time now is 07:39 PM.