Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Getting massive gains from/and climaxing without ejaculation

Hey chuby,

I just saw your post about the kundalini routine. Must have missed it earlier. I have done pranayama and meditation while sitting on a balled up sock before, to simulate the siddhasana posture which would probably break my knees if I attempted it. I can see how it would work, and it sounds like an extremely powerful practice, energetically and PE. I know personally when I have retained semen for a while, my body seems to naturally find powerful exercises, particularly the spine, often manifesting as ecstatic dance for me. The energy almost has a mind of its own and “finds” some amazing exercises. But so far very few PE applications for me. I’m very interested in any other ways kundalini yoga and PE have overlapped in your practices.

I also reviewed all your posts, and am a little more in tune with the details of the cock sock now. So the first 2-3 socks needs to be the same shape as the picture you posted above, just slightly larger for each one, and then you start adding 2-3 base socks. What do the base socks look like?

I am a slow study on learning to sew. Hopefully I can get a first layer done tonight, I have all the supplies now.


Before 5.5" x 4.1" volume 7.3 ci ////// After 7.2" x 4.8" volume 13.2 ci

I hope the upload worked. Good luck BD.

Attached Images
image.jpg
(486.1 KB, 70 views)
image.jpg
(476.5 KB, 52 views)
image.jpg
(454.4 KB, 54 views)

I think this could actually be done rather nicely by a smaller tailor shop. The seem should be comfortable, no?
Just dont tell the grandma there its a cock sock lol

BD you are king of DIY! You must have quiet a PE tool cabinet by now :D


DickerSchwanz=FatDick / 20cm length(No more!), 5.5 - 6 girth. Goal - max. Skills and Proportions

Achieved a cone shape taper girth? tell me how.. -> My Thread Best Theory to gain.. PI's ! Best Routine to Start

It’s great to hear about your experience with Kundalini, BD. you put it very aptly…like an ecstatic dance. That says it for me too. And yes, it does seem almost to have a mind of its own, or maybe absence of mind.

Perhaps I should mention that it isn’t necessary that the back edge be stitched the way it is in this photo. I took advantage of what was already sewn there. It was of course a wet suit before. Also, this will over lap some of the sock that is rolled over your shaft. It can be useful to use a thicker, more rigid, neoprene for at least one of these to achieve that suction effect I was trying to describe. Be sure that when these socks are placed on that hey are built in such a way that none of the edges line up with each other, they all overlap to some degree the one before. This helps with subsequent clamping arrangements, and also helps to distribute pressure more evenly.

Thanks chuby! Those pics do indeed help, and the explanation too. I see what you mean now about needing to have the first layers on before attempting a base sock. It looks like the first few layers would stabilize the base, so that the base sock has something to grab on to (the straight part) while it grabs more base (the curved part). I imagine even with the pics to help, it will still take quite a bit of trial and error to get the desired fit. The end result sounds worth it though.

Originally Posted by dickerschwanz
I think this could actually be done rather nicely by a smaller tailor shop. The seem should be comfortable, no?
Just dont tell the grandma there its a cock sock lol

That would be one interesting trip to the tailor. Especially when they take the measurements.

When I recently bought the parts at a hardware store for an extender, the guy at the check out asked me what on earth I was building. I told him a penis extender, and he was completely unfazed by it. He said ‘cool’ but didn’t say much more. I bet he secretly bought all the same parts the next day.

Originally Posted by dickerschwanz
BD you are king of DIY! You must have quiet a PE tool cabinet by now :D

Yeah, hardly a king of DIY, but I am learning, and have built up quite a collection. Right now I’ve got a situation similar to chuby’s, where I can PE as much as I want, and test out any theory or equipment I want. I’m not sure how long this situation will last, but I’m going to take advantage of it while I can by getting the best PE tools available. I hope to eventually master the practice of it so that I can use much less time overall on PE. I have probably spent over a thousand hours on Thunder’s researching. Seems crazy when typed out.


Before 5.5" x 4.1" volume 7.3 ci ////// After 7.2" x 4.8" volume 13.2 ci

Originally Posted by chubypeckerwood
I hope the upload worked. Good luck BD.

This looks essentially the same as monkeybars silicone xleeve things and I’ve never seen anyone claim girth gains from using them.
How about some in use pics and some of all your clamping equipment as well ?

It’s not the same Cap. It’s got some really useful design features. I made the cut-out for the first layer, and rolled it up. It looks very similar to the base socks, but the glans opening acts to pull the glans upward, stretching the bottom side of the shaft. The opening is smaller than I thought, and that’s probably to get a good grip right below the glans.

If you do an OK grip at the glans, and just point it upwards, it will pull the CS forward and up a bit. Even at a 80-90% erection it will maintain the dorsal shaft length, while increasing the ventral shaft length that is exposed. And maybe, according to Chuby, could even increase the dorsal length since he advises going longer on top and bottom with each additional layer. And when I say “increase length” here, I am still talking about an ADS, which in theory is more effective for amplifying the proliferative phase of healing. I.e. letting things heal (collagen proliferation) in the enlarged state.

So each additional layer “grabs” more “dork” by acting as a spreader at the curve in the sock. Once he’s got 3 of those on, he starts putting on base socks. Which are essentially the same shape, except the base opening is way wider than the glans opening on the front socks. The base socks mirror the front socks, but at the opposite end of the shaft, acting as a spreader and grabbing more of the base into the compression. So he adds about 3 base socks total.

Now the base socks, and the front socks, both overlap on the lower shaft. So if you think all 6 layers as a whole, there are 6 layers on the lower shaft where they all overlap. Then going away from that section, there’s a gradient of decreasing layers as you move away in both directions.

So the lower shaft has this soft, flexible clamp around it, that’s cushioned all the way up and down your shaft in a pressure gradient.

Then the final layer, is a stronger layer, which is shorter than the other base socks to put an additional force below the lowest spot where there are 6 layers (the lowest point of the clamp thus far) effectively lowering the clamp point, and making the pressure gradient more abrupt below the final layer (toward rectum) than above the final layer (lower shaft and upward). The upper portion would still be a gradual gradient.

All that by itself, I am imagining is a very good ADS. Pressure wraps are nothing new, this seems like the ultimate of them, to me.

Then it doubles as a clamp wrap allowing for clamping really far down the base. Probably with incredible comfort.

You guys see a master bullshitter with fluffy pics. I see a guy sharing the blueprints of an effective home grown PE method, and having a good time at it. I’ve always said believe in what you find useful, and ignore what you don’t.


Before 5.5" x 4.1" volume 7.3 ci ////// After 7.2" x 4.8" volume 13.2 ci

That’s right, you’ve made some good observations. Like you say, it’s important to get a good grip right below the gland, and it’s a fine line between too tight and too loose.

And the rest of what you said was just brilliant, I couldn’t have put it so well, but that is exactly what’s happening. And yes, you can get that spreader effect with the lower and upper socks. Having the last base sock made from the thicker, spongyer neoprene helps with the spreader effect also, as it grips the wrap beneath - the one on the shaft clutching the gland- almost like Velcro. This, like you observed, helps for maximum elongation, and hence you can get a clamp on way down the base.

I’m looking forward to hearing more of your observations as you test out your new creations. I have a feeling many others ate too.

Originally Posted by BeardedDragon

You guys see a master bullshitter with fluffy pics. ..

A master? Who ever said a master?

Originally Posted by BeardedDragon

I see a guy sharing the blueprints of an effective home grown PE method, and having a good time at it. I’ve always said believe in what you find useful, and ignore what you don’t.

Didn’t know there were outdoor grown PE methods. It’s true what They say, you learn something new everyday. :) Anyway good luck with that BD.

One other thing I find useful, especially if I have lower e.q,. is before rolling the socks on I will either do some jelking, or bundled stretching, anything to slightly traumatize the soft muscle tissue. This seems to help stimulate a better or quicker response in filling out the sock.

For those who would attempt to engage in this practice, that is what you will notice. Your cock will sort of like rebel against the pressure, and naturally want to expand. If you get it right it will go on all day like this, fatiguing the fuck out of your meat. It creates a vaguely pleasurable sensation that can be slightly distracting. When I first worked this out I was finding that it was difficult to focus on anything other than my throbbing pole. Also it was very difficult to fall asleep with it on, but now after years of practice it’s easily manageable. The most difficult thing is disguising the fact of wearing it. I have gone so far as to put it inside my fanny pack. This, however, can turn into a very embarrassing moment if you are ever to forget that it’s in there. Ideally, for comfort, you would want to maintain it in an upright position like the Vanuatuans do, and this can be achieved even in public, and I’m sure you can figure out how on your own. Much of the time I find that I like to wear it in a down ward position, using my tightywhities to bend and curl it down between my legs. This creates a good stretch while fully engorged under pressure. With practice it can be worn like this for hours. I will also do kegals while in this state. I find that this stretches my core out quite a lot.

Did you ever pump with the cock sock on?

The effect of compression you talk about is similar to pumping with a silicone sleeve.
Too much and it wont expand. Too less no effect.
Just right and it will expand more despite the compression. Its a bit like the compression socks you get in hospital I guess.
To get it just right with the neoprene I think the layering is what makes it possible. You either add or subtract a layer to get it right?

I guess with the cock sock the blood drawn in through the compression is held from flowing out by the thicker compression at the base


DickerSchwanz=FatDick / 20cm length(No more!), 5.5 - 6 girth. Goal - max. Skills and Proportions

Achieved a cone shape taper girth? tell me how.. -> My Thread Best Theory to gain.. PI's ! Best Routine to Start

Originally Posted by marinera
A master? Who ever said a master?

Didn’t know there were outdoor grown PE methods. It’s true what They say, you learn something new everyday. :) Anyway good luck with that BD.

Thank you. And outdoor PE methods are very risky, newbies will want to do at least 3 months of streaking before attempting outdoor PE.


Before 5.5" x 4.1" volume 7.3 ci ////// After 7.2" x 4.8" volume 13.2 ci

Just a pity he has got banned from TP.. He looked like a helpful guy. Many mods attacked him a bit too much IMO. But you guys know the rules of this forum.

I would like to ask him what he did to gain length first and how he kept on gaining length when you started clamping and using bandaged.

I will read all this thread and ask more questions.


When conguering a golddigger you need a large bank account, when conquering a dickdigger you need a large tool. When conquering a woman you need a minimum of three things: money, class and yes: dick size. Good news are, you can actually improve in all these three aspects.

Top

All times are GMT. The time now is 03:21 PM.