Thunder's Place

The big penis and mens' sexual health source, increasing penis size around the world.

Considering PMMA injections

Considering PMMA injections

Hi!
I am just looking for advice/guidance from anyone that has received PMMA. Please save the Dr. Plugs etc, I’m only interested in the pros/cons/reactions/feeling natural/etc. I have been considering this for a long time and feel I have hit a little bit of a plateau w/ stretching/jelqing etc.
Currently I’m sitting at about 6.25’ BPEL and 5.5’ MSEG.. I would love to get to 6’ MSEG. Can PMMA get me there? How many rounds would it take?

I apologize if this is posted elsewhere, I did a search and could not find info I was looking for.
Thank you!

For width you can inject fat from your body, and I know the results are quite good and its consider to be safe.

However for length, I don’t familiar with any reliable surgery but I think the risks are high:/

PMMA honestly seems like the luck of a draw, you will either get what you want or come out of it losing your entire function of your penis. Anyways, if you have the cash and are looking to invasive style procedures, why not look into Chemical PE? I would have loved to continue with it myself but I found that I had to titrate my PGE-1 so quickly that the cost was too much in such a short period of time. Good Luck


Current: BPEL - (Before 6.8' - 7') (Now 7' - 7.25')

Current: MSEG - 4.80' - 5.2'

Goal: 9x6

Pmma is expensive and you can count on going for a few session’s. I know bodybuilder’s use and it’s put into the muscle. So not sure if it would work on your penis and if it did I could not see it giving length but MAYBE girth. And the fat injections can cause an infection and is not a uniform look. If your only 3/4 off your goal why put something fake in your soldier knowing it could mess you up? Just curious that’s all. If I was you I’d keep doing p. E. Bro, it’s safer and you will eventually get the rest that you need. And your soldier will be healthier and happy.

Originally Posted by Paradigm

PMMA honestly seems like the luck of a draw, you will either get what you want or come out of it losing your entire function of your penis. Anyways, if you have the cash and are looking to invasive style procedures, why not look into Chemical PE? I would have loved to continue with it myself but I found that I had to titrate my PGE-1 so quickly that the cost was too much in such a short period of time. Good Luck

so you have done chemical p. E? What was your results from it? And what exactly is it and how does it work? Thanks

PMMA is toxic and dangerous. Deformities so bad that a user quit PE and freaked out after his results soured.

Best of luck but this forum doesn’t really have anyone with a PMMA success story that I know of


Now: 9" BPEL x 6.25" MSEG as of 11/10/2019 This is my story, a few progress pics of me here, and all my methods.

Then: 6.25" x 4.37" in 8/2009 Are you new to PE? Here's some advice I wish someone had given me when I first started.

My Extender and forward to 10" and balls enhancement project. There is no "Holy Grail" of Penis Enlargement. Only time and effort works. I'm *10* years in and counting. All you have to do is put the work in and keep the faith.

Originally Posted by Paradigm
PMMA honestly seems like the luck of a draw, you will either get what you want or come out of it losing your entire function of your penis. Anyways, if you have the cash and are looking to invasive style procedures, why not look into Chemical PE? I would have loved to continue with it myself but I found that I had to titrate my PGE-1 so quickly that the cost was too much in such a short period of time. Good Luck

I know absolutely nothing about Chemical PE, do you have any links, resources, etc?

I think to many bad vs good. P. E. Is a safe bet and it make’s you healthier

Originally Posted by FatJimi
Hi!
I am just looking for advice/guidance from anyone that has received PMMA. Please save the Dr. Plugs etc, I’m only interested in the pros/cons/reactions/feeling natural/etc. I have been considering this for a long time and feel I have hit a little bit of a plateau w/ stretching/jelqing etc.
Currently I’m sitting at about 6.25’ BPEL and 5.5’ MSEG.. I would love to get to 6’ MSEG. Can PMMA get me there? How many rounds would it take?

I apologize if this is posted elsewhere, I did a search and could not find info I was looking for.
Thank you!

I’m a moderator at Phalloboards, so have seen hundreds of PMMA cases.
You already have above average girth, so I really don’t think it’s a good idea to consider a foreign body filler.
In my opinion it’s all about risk and reward. If a guy has a genuinely small penis and it effects his self esteem to the point where it is seriously effecting his life, then I think PMMA is something worth looking into. But if a guy has an average or above average penis, it really isn’t worth the risk in my opinion.

There are temporary options, which are safer, such as Hyaluronic Acid. But these are expensive and aren’t quite as ideal for PE as a stimulatory filler like PMMA. But, if you really are determined to do some form of cosmetic enhancement, I think HA would be the best option for someone with your girth, looking for a relatively modest increase.

Originally Posted by 2 short
so you have done chemical p. E? What was your results from it? And what exactly is it and how does it work? Thanks

Yes, I have been on the protocol of chemical PE since Dr. Adams is located in Toronto, Ontario. Which is pretty much where I’m from. The protocol was:

*Titration until I get to 2 hours of full erection
*Every 3 hours, I would have to manually stretch for 2 - 3 minutes and apply the Verapamil
*In the evening, perform 7 - 9 minutes of manual stretching and do my injection
*Hours of injection erection was based on 10 - 15 hours per week but the reason there is a range of hours is because, depending on the break from the injection, it will be a week of only 10 hours of the injection
*The injection solution was definitely a Tri-Mix of PGE-1, DMSO, and something else that I don’t remember

Results
*My Flaccid stretch gained 0.5 - 0.7 inches and girth gain was like 0.1 inch but it eventually faded because I was not able to continue with the chemical PE since I’ve developed a serious allergic reaction to the verapamil (which apparently is a big factor of gains in this procedure)
*I truly believed that I could have made some significant gains if I was not so allergic to the verapamil which lead me to speak with the famous Chemical PE person. I can’t mention him but one google search of ‘chemicalpe’ and you will most likely know who I’m talking about.

So after contacting this person, I proceeded in purchasing all the required gear to create my own injection solution but this did not last very long because of the following issue:

*I was having a hard time titrating how much PGE-1 I needed since every single injection, I was not getting even close to 20 minutes of erection. at 1 point, I was at 100 mg of PGE-1 and still just at 20 minutes of erection time. 2000 MG was already at $100 USD plus shipping so it was already starting to get expensive since I have not hit my desired erection time. However, that did not stop me, what stopped me was the amount of plaque build up but the DMSO+PABA+DISTILL water topical solution was not breaking up the plaque fast enough in comparison to what I was injecting. So then eventually it lead me to consider hanging which I prefer a hell a lot more then the chemical PE route because no one really knows the long term effects of the Chemical PE.

You can do a forum search on chemical pe here or google Dr. Adams if you happen to be in Toronto. If you are planning to fly out to meet this Doctor, plan to stay in the city long enough for you to experiment with the titration. Anyways, hope this helps


Current: BPEL - (Before 6.8' - 7') (Now 7' - 7.25')

Current: MSEG - 4.80' - 5.2'

Goal: 9x6

PMMA; the stuff they make false teeth out of.

Originally Posted by Jimmybob55
PMMA; the stuff they make false teeth out of.

As someone that worked for a Dental Lab for a number of years, I have to respectfully disagree. False teeth can be made from a variety of materials, but PMMA is not one of them. My lab, nor any I associated w/ (including international labs) used PMMA in any Denture/Crown/Bridge/Implant/etc.

Originally Posted by FatJimi

As someone that worked for a Dental Lab for a number of years, I have to respectfully disagree. False teeth can be made from a variety of materials, but PMMA is not one of them. My lab, nor any I associated w/ (including international labs) used PMMA in any Denture/Crown/Bridge/Implant/etc.

Oh yes dentures can be made from other materials; but the majority to this day is acrylic. So tell me how does the dentist make a temporary crown in his office? What does he use?

I don’t understand why anyone would want to go under the knife in such a valuable area.. Its just like natural bodybuilding bro, be in it for the long run, slow and steady wins in the end


Gainz

Top
Similar Threads 
ThreadStarterForumRepliesLast Post
PMMA (Polymethyl methacrylate), Priapus, injection surgery for girth gains in 2017PizzzaPenis Enlargement Basics3207-20-2017 01:36 PM
Cortisone injections Anyone Ring in here10inchEgoPenis Enlargement Basics508-21-2005 06:36 AM

All times are GMT. The time now is 10:36 PM.